期刊文献+

聚能装药的多点环形起爆器性能测试及其应用 被引量:4

Performance test and application of the multi-point ring initiator for a shaped charge
下载PDF
导出
摘要 对聚能装药用多点环形起爆器的同步性能和环形起爆的聚能装药侵彻钢筋混凝土的侵彻威力进行了研究。应用高速摄影技术和光纤探针技术测量了多点环形起爆器各点输出的同步性,结果表明环形起爆器各点输出同步性好,时间差最大不超过0.1μs;聚能装药对钢筋混凝土的侵彻威力实验结果表明,采用多点环形起爆器的聚能装药对钢筋混凝土的侵彻威力比点起爆的有较大提高。 A series of experiments were conducted to investigate the synchrony of the multi-point ring initiator applied to a shaped charge and the penetration capability of the shaped charges with the multi-point ring initiators into reinforced concrete targets.The output synchrony of all points of the multi-point ring initiator was measured by using the high-speed photography and fiber probe technique.It is showed that the output synchrony of all points is good and the longest time difference is less than 0.1 μs.The shaped charges were initiated to penetrate into reinforced concrete targets by applying the multi-point ring initiators and the central point initiation,respectively.Comparison of the experimental results shows that the multi-point ring initiators can improve markedly the penetration capability of the shaped charges.
出处 《爆炸与冲击》 EI CAS CSCD 北大核心 2010年第6期664-668,共5页 Explosion and Shock Waves
关键词 爆炸力学 侵彻威力 多点环形起爆器 聚能装药 钢筋混凝土 Mechanics of explosion penetration capability multi-point ring initiator shaped charge reinforced concrete
  • 相关文献

参考文献9

  • 1Blache A, Weimann K. Shaped charge with jetting projectile for extended targets[C]ffProceedings of the 17th In-ternational Symposium on Ballistics. Midrand, South At'rical, 1998,2:207-215. 被引量:1
  • 2Whelan A J, Furnisss D R, Townsley R G. Experimental and simulated (analytical&numerical) elliptical-formshaped chargesEC3 // Proceedings of the 20th International Symposium on Ballistics. Orlando, USA, 2002:446-454. 被引量:1
  • 3Blache A, Weimann K. Generation of different detonation wave contours[C]//Proceedings of the 16th International Symposium on Ballistics. San Francisco, CA, 1996:337-346. 被引量:1
  • 4Cauret M, Delmas A, Petit J. Study ofhybeid charges[C]//Proceedings of the 17th International Symposium on Ballistics. Midrand, South Africal, 1998,2 : 357-364. 被引量:1
  • 5谭多望,孙承纬,赵继波,张克明,谢盘海.大锥角聚能射流实验研究[J].高压物理学报,2003,17(3):204-208. 被引量:30
  • 6吴晗玲 段卓平 李金柱.不同爆轰波形对杆式射流性能影响的数值模拟研究.南京理工大学学报,2004,28(6):11-16. 被引量:3
  • 7WU Han-ling, DUAN Zhuo-ping. Numerical simulation of influence on performance of rod-liked jet by shell[C]ff Proceedings of the 2005 International Autumn Seminar on Propellants, Explosives and Pyrotechnics (2005 IASPEP). Beijing, China, 2005:1113-1116. 被引量:1
  • 8Baker E L, Daniels A S, Turci J P, et al. Selectable initiation shaped charges[C]//Proceedings of the 20th Interna-tional Symposium on Ballistics. Orlando, USA, 2002:589-596. 被引量:1
  • 9段卓平,温丽晶,申健,张连生,汪庆桃.聚能装药用多点环形起爆器的设计[J].兵工学报,2011,32(1):101-105. 被引量:7

二级参考文献18

  • 1李发伯.小长径比聚能装药试验研究[R].绵阳:中国工程物理研究院流体物理研究所,1997.. 被引量:1
  • 2Blache A, Weimann K. Shaped charge with jetting projectile for extended targets[ C]//Proceedings of the 17th International Symposium on Ballistics, South Africa: Midrand, 1998, (2) : 207 - 215. 被引量:1
  • 3Whelan A J, Furnisss D R, Townsley R G. Experimental and simulated (analytical & numerical) elliptical-form shaped charges [ C] //Proceedings of the 20th International Symposium on Ballistics, US : Orlando, 2002,9 : 446 - 454. 被引量:1
  • 4Blache A, Weimann K. Generation of different detonation wave contours [ C ]//Proceedings of the 16th International Symposium on Ballistics, San Francisco: CA, 1996 : 337 - 346. 被引量:1
  • 5Cauret M, Delmas A, Petit J. Study of hybeid charges[C]//Proceedings of the 17th International Symposium on Ballistics, South Africa:Midrand, 1998, (2): 357 -364. 被引量:1
  • 6Wu H L, Duan Z P. Numerical Simulation of influence on performance of rod-liked jet by shell[C]//Proceedings of 2005 International Autumn Seminar on Propellants, Explosives and Pyrotechnics ( 2005 IASPEP), 2005 : 1113 - 1116. 被引量:1
  • 7Baker E L, Daniels A S, Turci J P, et al. Selectable initiation shaped charges[J]. Proceedings of the 20th International Symposium on Ballistics, US : Orlando, 2002 : 589 - 596. 被引量:1
  • 8Century Dynamics Inc. Autodyn User Manual Version 6. 1 [ S ]. Century Dynamics Ine, 2005. 被引量:1
  • 9Held M. The Projectile Forming Charges [A]. 3rd International Symposium On Ballistic [C]. Karlsruhe,Germany:[s. n. ],1977.23-25. 被引量:1
  • 10Christianson K L, Roth J R, Schmidt T L. Development of an Enhanced Warhead for the Penetration Augmented Munition [A]. Proceedings of the 41st Annual Bomb & Warhead Technical Meeting [C]. San Diego, CA: Naval Ocean Systems Center, 1991. 被引量:1

共引文献35

同被引文献45

  • 1张磊,胡时胜,梁宗宪.利用拉氏分析研究冲击载荷下混凝土应力——应变关系[J].工程力学,2005,22(4):163-166. 被引量:6
  • 2宁建国,商霖,孙远翔.混凝土材料动态性能的经验公式、强度理论与唯象本构模型[J].力学进展,2006,36(3):389-405. 被引量:33
  • 3GJB3197-1998,炮弹试验方法[S]. 被引量:4
  • 4Adam Jackowski,Edward Wlodarczyk.The influence of repressing liners made from sintered copper on jet formation[J].Journal of Materials Processing Technology,2006,171(1):21-26. 被引量:1
  • 5William P Walters,W J Flis,P C Chou.A survey of shaped-charge jet penetration models[J].International Journal of Impact Engineering,1988,7(3):307-325. 被引量:1
  • 6W A Gooch,M S Burkins,W P Walters,et al.Target strength effect on penetration by shaped charge jets[J].Interna-tional Journal of Impact Engineering,2001,26(1):243-248. 被引量:1
  • 7BAI Xi,LIU Jin-xu,LI Shu-kui,et al.Perforation of an ultra-high strength steel penetrated by shaped charge jet[J].Materials Science and Engineering,2012,553(15):142-148. 被引量:1
  • 8Tasneem Abbasi,S A Abbasi.The boiling liquid expanding vapour explosion(BLEVE):Mechanism,consequence assessment,management[J].Journal of Hazardous Materials,2007,141(3):489-519. 被引量:1
  • 9W P M Mercx,A C Van Den Berg,C J Hayhurst,et al.Developments in vapour cloud explosion blast modeling[J].Journal of Hazardous Materials,2000,71(1):301-309. 被引量:1
  • 10S B Dorofeev,V P Sidorov,A A Efimenko,et al.Fireballs from deflagration and detonation of heterogeneous fuel-rich clouds[J].Fire Safety Journal,1995,25(4):323-336. 被引量:1

引证文献4

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部