期刊文献+

NiCoCrAlY合金的铸态显微组织研究

The Investigation on Cast Microstructures of NiCoCrAlY Alloy
下载PDF
导出
摘要 采用真空感应熔炼的方法制备了NiCoCrAlY合金锭,并对合金的铸态显微组织进行了研究。结果表明:NiCoCrAl Y铸态合金主要由4个相组成,分别为γ相、γ'相、Y富集相及共晶组织β+γ'。其中Y富集相为Ni3.55Co0.5Cr0.2Al0.75Y,以网状形式偏聚于γ相周围;共晶组织中β相为(Ni,Co)Al,γ'为(Ni,Co)3Al,且γ'呈圆棒状镶嵌在β相中。 The casting microstructure of NiCoCrAlY alloy ingot, which is made by vacuum induction melting process, is studied. The result shows that the casting alloy of NiCoCrAlY is mainly composed of four phases, namely γ-phase, γ′ -phase, Y-rich phase and eutectic β+ γ′ . Y rich phase is Ni3.55 Co0. 5Cr0.2 Al0.75Y, surrounding y phase in the form of mesh. β and γ′ are (Ni,Co)Al and (Ni,Co)3Al respectively, and γ′ phase is embedded in the β phase as cylindrical rods in the eutectic.
出处 《有色金属(冶炼部分)》 CAS 北大核心 2011年第1期45-48,共4页 Nonferrous Metals(Extractive Metallurgy)
关键词 MCRALY 真空 感应熔炼 铸态组织 MCrAlY Vacuum Induction melting Cast microstructures
  • 相关文献

参考文献7

  • 1Brandl W, Marginean G, Maghet D, et al. Effects of specimen treatment and surface preparation on the iso- thermal oxidation behavior of the HVOF-sprayed MCrAIY cartings[J]. Surface & Coatings Technology, 2004, 188- 20-26. 被引量:1
  • 2Utu Dragos, Manginean Gabriela, Brandl Waltraut, et al. Improvement of the oxidation behavior of electron beam remelted MCrA1Y coatings [J]. Solid State Sciences, 2005, 7: 459--464. 被引量:1
  • 3Li S, Langlade C, Fayeulle S, et al. Influence of the microstructure of plasma deposited MCrAIY coatings on their tribological behavior[J]. Surface and Coatings Technology, 1998, 100--101: 7--11. 被引量:1
  • 4Achar D R G, Munoz-Arroyo R, Singheiser L, et al Modeling of phase equilibrium in MCrA1Y coating sys tems[J]. Surface& Coatings Technology, 2004,187 :272--283. 被引量:1
  • 5Krukovsky P, Kolarik V, Tadlya K, et al. Lifetime prediction for MCrAIY coatings by means of inverse problem solution (IPS)[J]. Surface and Coatings Technology, 2004,177--178:32--36. 被引量:1
  • 6田玉亮 胡敦芫 许根圜等.高钽MCrAIY粉末及涂层组织性能研究.有色金属:冶炼部分,2007,(0):11-13. 被引量:2
  • 7胡敦芫,陈美英,于月光,曾克里,任先京,王虎年.真空雾化CoCrAlTaY热喷涂粉末的特性及其涂层的结合强度[J].有色金属(冶炼部分),2006(z1):25-27. 被引量:4

二级参考文献7

  • 1唐英,邸宝永,杨杰.自熔性合金粉末冶炼工艺探讨[J].天津科技大学学报,2001,18(2):47-49. 被引量:3
  • 2[1]Saunders S R J,Nichous J R.Coatings and surfacetreatments for high temperature oxidation resistance[J].Mater.Sci.Technology,1989(5):780-805. 被引量:1
  • 3[2]Jeanine T,Demaxix-Marcin,Dinesh K.Protective coatings in the gas turbine[J].Surface and coatings technology,1994,68/69:1-8. 被引量:1
  • 4[3]Lee D G,Johnson D.An investigation of a CoNiCrAlY overlay coating and its oxidation behavior by means of imagining SI MS[J].Oxid Met,1992,38(3/4):217 -231. 被引量:1
  • 5[4]Czech N,Kolarik V,Quadakkers J,et al.Oxide layer phase structure of NiCrAlY coatings[J].Surf Eng,1997,13(5):384-388. 被引量:1
  • 6[5]Lih W,Chang W,Chao C H,et al.Effect of prealuminization on the properties of ZrO2 -8% Y2O3/Co-29Cr6Al-1Y thermal barrier coatings[J].Oxid Met,1992,38(112):99-124. 被引量:1
  • 7[7]李美拴.金属的高温腐蚀[M].北京:冶金工业出版社,2001:430-432. 被引量:1

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部