摘要
根据“相似相容原理”，制备了一种针对食品罐用镀锡钢板的溶剂型脱漆剂。讨论了表面活性剂、促进剂的选择，以及温度、挥发速率、搅拌时间对脱漆剂效率的影响。结果表明，表面活性剂CTMAB为2％，促进剂乳酸为28％，在80～85℃时搅拌10min，3～5min内可使漆膜软化、脱落，所得脱漆剂的脱漆效果最高，毒性、挥发性和腐蚀性低。红外光谱（FT-IR）分析结果表明，该体系在脱除漆膜的过程中未发生化学反应，脱漆后材料组分基本无变化，脱漆剂可反复利用。
According to the principe of ＂ structural similitude, mutual solubility＂, a solvent -based paint stripper for food - can tinplates was prepared. The influence of surfactant and accelerator as well as temperature, volatility, stirring rate on the stripping efficiency was discussed. The results showed that a low toxic, less corrosive and low volatility paint stripper was obtained when the composition was as follows （ mass fraction） ： surfactant CTMAB 2% and accelerator lactic acid 28% were mixed at 80 - 85 ℃ for 10 min. The film was softened and removed in 3 -5 rain, with a higher stripping efficiency. IR was used to prove that the paint stripper did not react with coating film, and could be reused.
出处
《涂料工业》
CAS
CSCD
北大核心
2011年第1期65-68,共4页
Paint & Coatings Industry
关键词
脱漆剂
苯乙醇
环保型
paint stripper
phenyl - ethanol
environmental friendly
