摘要
基于齿轮啮合理论,采用了刃边齿条形测头在位综合测量直母线偏差的方案。通过测量轮齿廓面上直母线族的各个偏差,确定测量网格,建立了在获得直母线偏差后分离出齿廓偏差和螺旋线偏差的数学模型,并对其进行了仿真分析。文中的数学模型和仿真研究结果为研制直母线测量仪和在线测量系统提供了理论依据。
Based on the theory of gearing mesh,a rack-shaped-edge probe was used in the comprehensive on-line measurement for straight generatrix deviation. By measuring the deviation of each straight generatrix on tooth profile to determine the measurement grid,the isolated mathematical models of the tooth profile deviation and the helix deviation are established after obtaining straight generatrix deviation,and then its simulation is carried out. The mathematical models and simulation provide a theoretical basis for the development of the straight generatrix measuring instrument and on-line measurement system.
出处
《机械传动》
CSCD
北大核心
2010年第7期39-40,63,共3页
Journal of Mechanical Transmission
基金
辽宁省自然科学基金项目(20072042)
沈阳市科技攻关项目(1071197-1-00)
关键词
齿廓偏差
螺旋线偏差
刃边齿条形测头
直母线偏差
测量网格
数学模型
仿真
Tooth profile deviation Helix deviation Rack-shaped-edge probe Straight generatrix deviation Measurement grid Mathematical model Simulation
