期刊文献+

锌锡锑三元合金纳米微粒的制备及贮锂性能 被引量:1

Preparation and Properties of Nanosized ZnSnSb_2 Particles as a Lithium Storage Material
下载PDF
导出
摘要 用化学还原-共沉淀法合成了锂离子电池纳米锌锡锑三元合金负极材料ZnSnSb2。通过XRD、TEM和电化学测试对材料进行了表征。所制备的材料粒径大小分布在5-15nm之间。在充放电电压为1.5V到0V范围内,初始可逆充电容量为708mAh/g,经过20周的循环后,充电容量保持为82.1%。充放电电压范围为0.9V到0V时,初始可逆充电容量为329mAh/g,经过20次充放电循环后,可逆充电容量仍然保持在95.7%。由于材料中非活性物质Li3Sb的作用以及材料所具有的纳米结构,使其循环性能大大提高。 Nanosized ZnSnSb_2 powders were synthesized as an anode material for lithium ion batteries by reductive co-precipitation method.The product was characterized by X-ray diffractometry(XRD),transmission electron microscopy(TEM)and electrochemical measurements.The sizes of the particles are in the range of 5 to 15nm.The first-cycle reversible capacity of the prepared ZnSnSb_2 is 708mAh/g and the rest charge capacity after 20 cycles is 82.1% when the cell is discharged and charged between 1.5V and 0V.The first-cycle reversible capacity is 329mAh/g and the rest charge capacity after 20 cycles is 95.7% when the cell is discharged and charged between 0.9V and 0V.Because the roles of the inactive substance Li_3Sb and nanosized particles,the sample shows excellent cycle performance.
出处 《材料科学与工程学报》 CAS CSCD 北大核心 2010年第3期331-334,共4页 Journal of Materials Science and Engineering
基金 浙江省教育厅科研计划资助项目(Y200907595)
关键词 锌锡锑合金 锂离子电池 贮锂材料 Zinc-Tin-Antimony alloy Lithium ion batteries Lithium storage materials
  • 相关文献

参考文献7

  • 1T Zhang, L J Fu, J Gao, Y P Wu, R Holze, H Q Wu. Nanosized tin anode prepared by laser-induced vapor deposition for lithium ion battery[J]. Journal of Power Sources, 2007, 174: 770-773. 被引量:1
  • 2S Q Zhang, C H Chen. The synthesis of composite Sn-SnSb films for lithium-ion batteries by electrochemical deposition [J].Materials Research Bulletin, 2008, 43: 3601-3606. 被引量:1
  • 3F Wang, M Zhao, X Song. The improved electrochemical performance of SnSb-hased alloy anode materials for Li-ion batteries[J]. Journal of Alloys and Compounds, 2009, 472: 55- 58. 被引量:1
  • 4C Q Zhang, J P Tu, X H Huang, Y F Yuan, S F Wang, F Mao. Preparation and electrochemical performances of nanoscale FeSn2 as anode material for lithium ion batteries[J]. Journal of Alloys and Compounds, 2008, 457: 81-85. 被引量:1
  • 5W Pu, X He, J Ren, C. Wan, C Jiang. Electrodeposition of Sn- Cu alloy anodes for lithium batteries [J]. Electrochimica Acta, 2005, 50: 4140-4145. 被引量:1
  • 6H Ghallali, H Groult, A Barhoun, K Draoui, D Krulic, F Lantelme. Electrochemical synthesis of Ni-Sn alloys in molten LiCl-KCl[J]. Electrochimica Acta, 2009, 54: 3152-3160. 被引量:1
  • 7F Belliard, J T S lrvine. Electrochemical performance of ball- milled ZnO-SnO2 systems as anodes in lithium-ion baeetry [J]. Journal of Power Sources, 2001, 97-98: 219-222. 被引量:1

同被引文献6

  • 1LIU G, SHEN X, UI K, et al. Influence of the binder types on the electrochemical characteristics of tin nanoparticle negative electrode for lithium secondary batteries [J]. J Power Sources, 2012, 217: 108-113. 被引量:1
  • 2GNANAMUTHU R M, MOHAN S, LEE C W. Development of high energy capacities of nanoscaled Sn-Cu alloy thin film electrode materials for Li-ion batteries[J].Materials Letters,2012,84: 101-103. 被引量:1
  • 3ZHANG T, FU L J, GAO J, et al. Nanosized tin anode prepared by laser-induced vapor deposition for lithium ion battery [J]. J Power Sources, 2007, 174: 770-773. 被引量:1
  • 4ClIO J.Control of the carbon shell thickness in SuxGx@carbon core-shell nanoparticles using alkyl terminators: its implication for high-capacity lithium battery anode materials [J]. Electrochimica Acta, 2008, 54: 461-466. 被引量:1
  • 5LIANG S, ZHU X, LIAN P. Superior cycle performance of Sn@C/ graphene nanocomposite as an anode material for litbiurn-ion batteries[J]. J Solid State Chemistry, 2011,184: 1400-1404. 被引量:1
  • 6白红美,陶占良,程方益,陈军.锂离子电池锡薄膜负极制备及电化学性能研究[J].电化学,2011,17(1):43-47. 被引量:6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部