期刊文献+

TC21钛合金的高温动态拉伸力学行为 被引量:14

Dynamic tensile behavior of TC21 titanium alloys at elevated temperatures
下载PDF
导出
摘要 在应变速率为0.001~1270s-1、温度为298~1023K条件下对魏氏组织和双态组织的TC21钛合金进行拉伸试验,利用SEM对拉伸试样的断口进行观察。结果表明:TC21钛合金的拉伸力学行为存在显著的温度和应变速率相关性;当应变速率为0.001和0.05s-1的屈服应力—温度曲线存在转折点,且转折点温度随应变速率的增大而升高;当温度低于转折点温度时,相同氧含量的TC21钛合金和多晶纯钛的屈服应力具有相似的温度相关性;微观组织影响屈服应力的幅值和拉伸塑性的大小,但不影响屈服应力的温度相关性和应变速率相关性;除魏氏组织在室温0.001s-1时为穿晶和沿晶混合断裂外,其他工况下的魏氏组织和双态组织均为穿晶韧性断裂;TC21钛合金在拉伸变形过程中未出现绝热剪切带和形变孪晶。 Tensile tests were performed on TC21 titanium alloy with Widmanstatten microstructure(W) and bimodal microstructure(BM) at temperature ranging from 298 to 1 023 K and strain rate ranging from 0.001 to 1270 s-1.The results show that the temperature and strain rate have significant effects on the tensile behavior of TC21.At low strain rates of 0.001 and 0.05 s-1,a discontinuity is found in the yield stress—temperature curve.Below discontinuity temperature,the temperature dependence of the yield stress of TC21 is similar to that of cp-Ti that has the same interstitial solute concentration of oxygen.The microstructure affects the magnitude of yield stress and tensile ductility,but not the strain rate sensitivity and temperature sensitivity of the yield stress.The samples with Widmanstatten microstructure show a mixed manner of transgranular fracture and intergranular fracture at room temperature and strain rate of 0.001 s-1,while under other conditions both microstructures show a manner of transgranular fracture.Neither adiabatic shear band nor deformation twinning is found in the tested samples.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2010年第4期647-654,共8页 The Chinese Journal of Nonferrous Metals
基金 国家自然科学基金资助项目(10472100)
关键词 钛合金 TC21钛合金 微观组织 魏氏组织 双态组织 动态力学行为 应变速率 TC21 titanium alloy Widmanstatten microstructure bimodal microstructure microstructure dynamic tensile behavior strain rate
  • 相关文献

参考文献19

  • 1MEESTER B,DONER M,CONRAD H.Deformation kinetics of the Ti-6Al-4V alloy at low temperatures[J].Metallurgical Transactions A,1975,6:65-75. 被引量:1
  • 2MAJORELL A,SRIVATSA S,PICU R C.Mechanical behavior of Ti-6Al-4V at high and moderate temperatures-partⅠ:experiment results[J].Mater Sci Eng A,2002,326:297-305. 被引量:1
  • 3MEYERS M A,SUBHASH G,KAD B K.Evolution of microstructure and shear-band formation in α-hcp titanium[J].Mechanics of Materials,1994,17:175-193. 被引量:1
  • 4NEMAT-NASSER S,GUO W G,NESTERENKO V F,INDRAKANTI S S,GU Y B.Dynamic response of conventional and hot isostatically pressed Ti-6Al-4V alloys:experiments and modeling[J].Mechanics of Materials,2001,33:425-439. 被引量:1
  • 5LEE W S,LIN C F.Plastic deformation and fracture behavior of Ti-6Al-4V alloy loaded with high strain rate under various temperatures[J].Mater Sci Eng A,1998,241:48-59. 被引量:1
  • 6FOLLANSBEE P S,GRAY G T.An analysis of the low temperature,low and high strain-rate deformation of TI-6Al-4V[J].Metallurgical Transactions A,1989,20:863-874. 被引量:1
  • 7赵永庆,曲恒磊,冯亮,杨海瑛,李辉,张颖楠,郭红超,黄定坤.高强高韧损伤容限型钛合金TC21研制[J].钛工业进展,2004,21(1):22-24. 被引量:120
  • 8张颖楠,赵永庆,曲恒磊,李辉,冯亮,郭红超,黄定坤.热处理对TC21合金显微组织和室温拉伸性能的影响[J].稀有金属,2004,28(1):34-38. 被引量:32
  • 9朱知寿,王新南,童路,刘东升.新型TC21钛合金热处理工艺参数与显微组织演变的关系研究[J].钛工业进展,2006,23(6):24-27. 被引量:27
  • 10FEI Y H,ZHOU L,QU H L,ZHAO Y Q,HUANG C Z.The phase and microstructure of TC21 alloy[J].Mater Sci Eng A,2008,94:166-172. 被引量:1

二级参考文献22

共引文献187

同被引文献211

引证文献14

二级引证文献372

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部