期刊文献+

聚乙烯醇水溶液的剪切流变行为 被引量:6

Shearing Rheological Behavior of Poly(Vinyl Alcohol) Aqueous Solutions
下载PDF
导出
摘要 研究了不同浓度和分子量的聚乙烯醇(PVA)水溶液的流变性能。讨论了剪切速率和温度对PVA水溶液的表观黏度、非牛顿指数和粘流活化能的影响。实验结果表明,随剪切速率增加,不同浓度和聚合度样品间黏度的差别降低,所有PVA水溶液均显示剪切变稀行为。随PVA浓度提高,溶液的非牛顿指数是先增大后降低。同时发现剪切速率的变化影响PVA水溶液黏度的温度依赖性。 This paper described the rheological properties of a number of aqueous solutions of polyvinyl alcohol(PVA)as a function of the concentration and molecular weight.The effect of shear rate and temperature on the apparent viscosity,non-Newtonian exponent and flow activation energy of the PVA solutions was discussed.The experiment results indicate that the differences in viscosity between PVA solutions decreases,and shear thinning behavior can be observed.The value of n shows an increase with initial increase of concentration and then a decrease with further increase of concentration.It is also worth mentioning that the temperature sensitivity of viscosity for the PVA solutions is affected by the shear rate.With increasing shear rate,the activation energy of the PVA solutions is variational.
出处 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2010年第3期65-67,71,共4页 Polymer Materials Science & Engineering
关键词 聚乙烯醇 溶液 流变性能 poly(vinyl alcohol) aqueous solution rheological property
  • 相关文献

参考文献6

  • 1杨芳,熊宪辉,王琪,李莉.改性聚乙烯醇的流变行为及其吹塑加工研究[J].高分子材料科学与工程,2007,23(3):190-193. 被引量:13
  • 2STAMMEN J A, WILLIAMS S, KU D N, et al. Mechanical properties of a novel PVA hydrogel in shear and unconfined compression[J]. Biomaterials, 2001, 22: 799-806. 被引量:1
  • 3LYOO W S, LEE S J, KIM J H, et al. Effect of molecular weight on the rheological properties of atactic poly (vinyl alcohol )/ dimethylsulfoxide/water solution[J]. J. Appl. Polym. Sci., 2004, 93: 41-46. 被引量:1
  • 4SONG S I, KIM B C. Characteristic rheological features of PVA solutions in water-contalning solvents with different hydration states [J]. Polymer, 2004, 45: 2381-2386. 被引量:1
  • 5吴其晔,巫静安编..高分子材料流变学[M].北京:高等教育出版社,2002:377.
  • 6王贵恒主编,成都科技大学等编..高分子材料成型加工原理[M].北京:化学工业出版社,1982:320.

二级参考文献7

  • 1李莉,王琪,王茹.聚乙烯醇拉伸薄膜的结构与性能研究[J].四川大学学报(工程科学版),2004,36(5):44-48. 被引量:10
  • 2吴崇周(WU Chong-zhou).塑料成型加工原理(Principles of Plastic Processing).长春:吉林科学技术出版社(Changchun:Jilin Science and Technology Press),1986:26. 被引量:1
  • 3王贵恒(WANG Gui-heng).高分子材料成型加工原理(The Principles of Polymer Molding and Processing).北京:化学工业出版社(Beijing:Chemical Industry Press),1982:27. 被引量:1
  • 4吴其晔(WU Qi-ye),巫静安(WU Jing-an).高分子材料流变学(Polymer Rheology).北京:高等教育出版社(Beijing:Higher Education Press),2002:46~64. 被引量:2
  • 5Garcia-Won A,Meddad A,Turcm E,et al.Polymer Engineering and Science,2002,2:346. 被引量:1
  • 6Alfonsius B,Ariawan S G,Hatzikiriakos S K,et al.Advances in Polymer Technology,2001,1:1. 被引量:1
  • 7Kamal M,Kalyon D,Tan V.Polymer Engineering and Science,1982,5:287. 被引量:1

共引文献12

同被引文献36

引证文献6

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部