期刊文献+

基于OMAP处理器图像调焦系统的触摸显示屏接口设计 被引量:4

Design of Touch-LCD Interface in Image Focusing System Based on OMAP Processor
下载PDF
导出
摘要 结合图像调焦系统的实际应用需求,提出一种基于OMAP(Open Multimedia Application Plant)处理器的图像调焦系统方案,给出了处理器与触摸显示屏的接口硬件设计,分析了在Linux系统下的接口驱动开发,讨论了实际应用中存在的图像分辨率变换及触点窗口形成两个关键问题,将输入的图像数据及对焦窗口成比例显示在液晶屏上。在自动选择的对焦窗口不满足要求时,使用触摸屏来重新调整对焦窗口,从而实现人工参与对焦窗口的快速选择及调整,满足了特定领域对图像调焦系统的特殊要求。 According to the actual requirements,a scheme of image focusing system based on OMAP processor was proposed,and the hardware design of interface with touch-LCD was introduced in detail.Then,the relevant Linux drivers were analyzed and two key problems in the application,the transform of image resolution and the form of touch-dot window,were discussed.Therefore,the inputting image data and focusing window could be displayed on the LCD proportionally.When the auto-selecting focusing window didn't meet the needs,touch screen could be used to readjust it.As a result,the quick manual selection and adjustment of focusing window was implemented,which met the special need of image focusing system in special field.
出处 《液晶与显示》 CAS CSCD 北大核心 2010年第1期139-144,共6页 Chinese Journal of Liquid Crystals and Displays
关键词 对焦窗口 触摸显示屏 OMAP处理器 LINUX驱动 focusing window touch-LCD OMAP processor Linux drivers
  • 相关文献

参考文献7

二级参考文献13

共引文献57

同被引文献41

  • 1陈兴美,严壮志.基于FPGA的红外光斑中心实时检测[J].红外与激光工程,2005,34(4):401-405. 被引量:10
  • 2陶品.嵌入式系统 第一讲 嵌入式系统技术现状与发展趋势[J].世界电子元器件,2006(2):38-40. 被引量:1
  • 3Gillespie D. Novel touch screen for hand-held devices[J]. Information Display, 2002,18(2):22-25. 被引量:1
  • 4Morris J. Five-wire touch screens make inroads [J]. Information Display, 2002,18 (8):24-26. 被引量:1
  • 5Devisser B. Touch LCDs for portable device [J]. Information Display, 2003,19 (7) :18-21. 被引量:1
  • 6Takao N,Shi J,Baker S. Telegraffiti: A camera-proiector basedremote sketching system with hand-based user interface and automaticsession summarization [[J].International Journal of Computer Vision, 2003,53(2):115-133. 被引量:1
  • 7MORALES-VELAZQUEZ L, ROMERO-TRONCOSO R D J, OSORNIO-RIOS R A, et al. Open-architecture system based on a reconfigurable hardware-software multi-agent platform for CNC machines [J:. Journal of Systems Architecture,2010,56(9) :407-418. 被引量:1
  • 8OSORNIO-RIOS R A, ROMERO-TRONCOSO R D J, HERRERA-RUIZ G, et al. The application of reconfigurable logic to high speed CNC milling machines controllerEJ]. Control Engineering Practice, 2008,16 (6) : 674-684. 被引量:1
  • 9DONG J CH, YANG X ZH, LIU Q J, et al. Design and implementation of CNC controller using reconfigurable hardware [- C 1. IEEE International Conference on Control and Automation, 2009: 1481-1486. 被引量:1
  • 10凌翔贵.基于ARM的嵌入式可重构数控系统运动控制器的研究[D].天津:天津大学,2011. 被引量:1

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部