期刊文献+

氯磺化聚乙烯的降解动力学 被引量:3

Degradation Kinetics of Chlorosulfonated Polyethylene
下载PDF
导出
摘要 通过热重分析仪研究了不同氯硫含量的氯磺化聚乙烯(CSM)在不同升温速率下的热分解行为。采用Ozawa及Kissinger方程研究了氯磺化聚乙烯的降解动力学,研究发现CSM的热降解过程包括两个主要失重平台,而且氯磺化聚乙烯的热分解反应不是一级反应。Ozawa方程计算的活化能随着产物中氯硫含量的增加从304.661kJ/mol下降到292.573kJ/mol。Kissinger方程计算的活化能分别为282.785kJ/mol和274.176kJ/mol。ln(β/Tm2)对1/Tm作图得一直线,证明氯磺化聚乙烯的热分解符合无规分解模型。 The Chlorosulfonated polyethylene (CSM) with different chlorine and sulfur elements content were studied at several heating in air rates by thermogravimetric analysis (TGA). The degradation kinetics of CSM was analyzed by Ozawa and Kissinger equation. The TGA results indicate that the degradation of GSM under goes two steps. The thermal degradation of CSM is not a first order reaction. The activation energy of CSM decreases from 304.661 ld/mol to 292.573 kJ/mol and from 282.785 kJ/mol to 274. 176 kJ/mol with chlorine and sulfur elements content increasing by Ozawa method and Kissinger equation, respectively. The thermal degradation of CSM accords with the model of random degradation
出处 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2010年第2期99-102,共4页 Polymer Materials Science & Engineering
基金 吉林省科技厅项目(20086034-2)
关键词 氯磺化聚乙烯 降解动力学 活化能 Ozawa KISSINGER CSM degradation kinetics activation energy Ozawa Kissinger
  • 相关文献

参考文献8

  • 1KOTEK J, KELNAR I, STUEDNOVSKY M, et al. Chlorosulfonated polypropylene: preparation and its application as a eouping agent in polypropylene-clay nanocomposites [ J ]. Polymer, 2005, 46: 4876-4881. 被引量:1
  • 2GUPTA S, CHOWDHURY S R, MISHRA J K, et al. Heat- shrinkable polymer blends through interehain crosslinking based on ethylene propylene and chlorosulfonated polyethylene [ J ]. Mater. Lett., 2000, 46: 125-130. 被引量:1
  • 3王玉东,刘民英,赵清香,杜宝石,李海洲,李相魁.尼龙109的热降解过程与动力学的研究[J].高分子材料科学与工程,1999,15(3):78-80. 被引量:11
  • 4闰明涛.聚对苯二甲酸甲二酯的热分解行为及其动力学研究[J].中国塑料,2005,19(9):57-60. 被引量:5
  • 5LU C L, CUI Z C, YANG B, et al. Polymerization mechanisms and curing kinetics of novel polymercaptan curing system containing epoxy/nitrogen[J]. J. Appl. Polym. Sci., 2002, 86: 589-595. 被引量:1
  • 6CHAILAN J F, BOITEUX G, CHAUCHARD J, et al. Effect of thermal degradation on the viscoelastic and dielectric properties of chlorosulfonated polyethylene compounds [ J ]. Polym. Degrad. Stab., 1995, 48: 61-65. 被引量:1
  • 7VARMA A J, KONDAPALLI P, DESHAPANDE S V, et al. Effect of single-step chlorosulfonation of HDPE on its thermal properties in a sealed pressure reactor [ J ]. Polym. Degrad. Stab. , 1999, 63: 5-9. 被引量:1
  • 8JIMENEZ A, LOPEZ J, TORRE L, et al. Kinetic analysis of the thermal degradation of PVC plastisols[J]. J. Appl. Polym. Sei., 1999, 73: 1069-1079. 被引量:1

二级参考文献9

  • 1赵溥香 朱诚身 等.-[J].高分子材料科学与工程,1989,5(5):53-53. 被引量:1
  • 2Huo W L 吕世光译.聚合物稳定化[M].北京:轻工业出版社,1986.182. 被引量:1
  • 3栗原福次 吴三硕译.塑料的老化[M].北京:国防出版社,1977.253. 被引量:7
  • 4赵清香,高分子材料科学与工程,1989年,5卷,5期,53页 被引量:1
  • 5吕世光(译),聚合物的稳定化,1986年,182页 被引量:1
  • 6陈镜泓,热分析及其应用,1985年 被引量:1
  • 7吴三硕(译),塑料的老化,1977年,253页 被引量:1
  • 8East G C, Morshed M. The Preparation of Poly(methyleneesters)[J]. Polymer, 1982, 23:1 555-1 557. 被引量:1
  • 9Cimecloglu A L, East G C, Morshed M. The synthesis and Characterization of Poly ( methylene terephthalate )[J].J.Polym. Sci., Part A: Polym, Chem., 1988, 26:2 129-2 139. 被引量:1

共引文献13

同被引文献25

  • 1朱永茂,殷荣忠,刘勇,刘义红,杨玮.2003-2004年国外酚醛树脂及其塑料市场现状和技术进展[J].热固性树脂,2005,20(2):36-39. 被引量:11
  • 2刘芝芳,吴志贤.酚醛环氧树脂固化动力学研究[J].南华大学学报(自然科学版),2006,20(4):108-110. 被引量:5
  • 3Wang Z, Bian Y L, Ni H Z, et al. The preparation and thermodynamic behaviors of chlorosulfonated polyethylene [ J ]. J. Appl. Polym. Sci., 2010, 1002: 2195-2100. 被引量:1
  • 4Hablot E, Bordes P, Pollet E, et al. Thermal and thermo- mechanical degradation of poly(3-hydroxybutyrate)-based multiphase systems[J]. Polym. Degrad. Stab. ,2008, 93: 413-421. 被引量:1
  • 5A1-MuUa A, Ali S H, N-Has.san M. Blends of poly(ethylene terephthalate) and poly (methyl methacrylate) : II. non-isothermal degradation kinetics[J]. Kuwait J. Sci. Eng., 2009, 36: 117-139. 被引量:1
  • 6Chiu Y C, Ma C C M, Liu F Y. Thermal degradation and flammability of P/Si polysilsesquioxane epoxy nanocomposites[J]. J. Appl. Polym.Sei., 2009, 114: 1435-1443. 被引量:1
  • 7Lu C L, Cui Z C, Yang B, et al. Polymerization mechanisms and curing kinetics of novel polymercaptan curing system containing epoxy nitrogen[J].J. Appl. Polym. Sci., 2002, 86: 589-595. 被引量:1
  • 8GURUNATH P V, BIJWE J. Friction and wear studies on brake-pad materials based on newly developed resin [ J ]. Wear, 2007, 263 (12): 1212-1219. 被引量:1
  • 9Zhao R F,Cheng S J, Shun Y, et al. Preparation of chloro- sulf onated polyethylene by the gas-solid method[J]. J Appl Polym Sci, 2001,81 (14) : 3582-3588. 被引量:1
  • 10Wang Z, Bian Y L, Zhang M Y, et al. The preparation and thermodynamic behaviors of chlorosulfonated polyethylene [J]. l Appl Polym Sei,2010,116 (4) :2095-2100. 被引量:1

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部