摘要
胶态分散凝胶（ＣＤＧ）是由低浓度的部分水解聚丙烯酰胺（ＨＰＡＭ）和柠檬酸铝（交联剂）形成的，聚丙烯酰胺和交联剂中铝的配比为２０∶１．分别研究了ＣＤＧ体系和不加交联剂的ＨＰＡＭ溶液在填充砂中的流动阻力以及ＨＰＡＭ的相对分子质量、填充砂的粒度对ＣＤＧ体系在填充砂中流动性的影响。研究结果表明，不加交联剂的ＨＰＡＭ溶液在填充砂管中的流动阻力略有增加，而加交联剂的ＣＤＧ体系在填充砂管中的流动阻力大幅度增加。ＣＤＧ体系在粗砂中流动时，需流过６５Ｖｐ（孔隙体积）的溶液，才能使填充砂管的阻力系数大大增加；而要增加同样的阻力系数，细砂管只需流过２１Ｖｐ的溶液。ＨＰＡＭ的相对分子质量大时。
The flow property of the solution of colloidal dispersion gel(CDG) and hydrolytic polyacrylamide (HPAM) with different molecular weight in an unconsolidated sandpack and the influence of different size of the sand on the flow property of CDG in the sandpack are studied. Colloidal dispersion gels were made up of low concentrations of polymer ( HPAM ) and aluminum citrate in water. The ratio of HPAM /Al 3+ was 20∶1. The results of the study showed that the resistance factor of CDG is much larger than that of HPAM solution in the sandpack.The flow resistance of CDG in the fine and coarse sandpacks increased rapidly, after the solutions corresponding 21 and 65 times of porous volume were injected respectively. The flow resistence of the CDG formed by HPAM with larger molecular weight in the sandpack increased more quickly than that of the CDG by HPAM with smaller molecular weight. CDG is able to increase the flow resistance in the sandpack effectively.
出处
《石油大学学报（自然科学版）》
CSCD
1998年第4期93-95,共3页
Journal of the University of Petroleum,China(Edition of Natural Science)
关键词
胶态分散凝胶
聚合物驱油
多孔介质
流动阻力
gel
polyacrylamide
crosslinker
flow property
resistance force
porous media
