期刊文献+

PMDA/ODA型聚酰亚胺的共聚改性研究 被引量:4

Study on modification of PMDA/ODA-copolyimide
下载PDF
导出
摘要 以1,3-双(4-氨基苯氧基)苯(BAPB134)和4,4’-二氨基二苯醚(ODA)为二胺单体,与均苯四甲酸二酐(PM-DA)进行共聚,合成了一系列具有一定溶解性的聚酰亚胺(PI)。采用IR、TGA、DSC、XRD和拉伸实验等手段,对其结构和性能进行了研究。结果表明:共聚酰亚胺(CoPI)薄膜为非晶态结构,其热性能和拉伸强度与均聚物相当,模量有所降低,而断裂伸长率显著提高。 A series of soluble polyimides (PI) were prepared by polycondensation of 1,3-bis(4-aminophenoxy)ben-zene (BAPB134), 4,4'-diaminodephenyl ether (ODA) and pyromellitic dianhydride (PMDA). Their structures and prop- erties were characterized by IR, TGA, DSC, XRD and tensile tester. The XRD results showed that copolyimide (CoPI) films were amorphous state, and the DSC and TGA analysises showed that they had the same high thermal behavior as homopolyimides. At the same time, the tensile tester showed that tensile strain of CoPI was largely improved, but tensile modulus was lower.
出处 《化工新型材料》 CAS CSCD 北大核心 2009年第7期59-60,72,共3页 New Chemical Materials
基金 东莞市科技计划项目(2004A10605001)
关键词 共聚酰亚胺 1 3-双(4-氨基苯氧基)苯 改性 copolyimide, 1,3-bis (4-aminophenoxy) benzene, modification
  • 相关文献

参考文献7

  • 1Ding M X.Isomeric polyimides[].Progress in PolymerScience.2007 被引量:1
  • 2Hsiao S H,Yang C P,Huang S C.1,5-Bis(4-amino-2-tri-fluoromethlphenoxy)naphthalene and aromatic tetracar-boxylic dianhydrides[].European Polymer Journal.2004 被引量:1
  • 3Kuroki T.Crystalline polyimide for melt molding with sat-isfactory thermal stability[].US.2002 被引量:1
  • 4Pak SK,Park SY,Lee CJ.Direct polymerization of aromatic diacid dimethyl esters with aromatic diamines II . Control of copolyimide chemical structure[].Polymer.2000 被引量:1
  • 5Park J W,Lee M,Lee M H,et al.Synthesis and Characterization of Soluble Alternating Aromatic Copolyimides[].Macromolecules.1994 被引量:1
  • 6Nishino T,Kotera M,Inayoshi N, et al.Residual stress and micro-structures of aromatic polyimide with different imidization processes[].Polymer.2000 被引量:1
  • 7Takahashi N,Yoon D Y,Parrish W.Molecular order in condensed statesof semiflexible poly(amic acid) and polyimide[].Macromolecules.1984 被引量:1

同被引文献36

  • 1刘向阳,顾宜.高性能聚酰亚胺纤维[J].化工新型材料,2005,33(5):14-17. 被引量:26
  • 2郭涛,徐圆,赵陈嘉,夏清明,胡爱林,张清华.PMDA-ODA型聚酰亚胺纤维的热稳定性研究[J].高科技纤维与应用,2011,36(1):28-31. 被引量:3
  • 3戴冕,陈大俊,张清华.共聚型聚酰亚胺的热性能研究[J].高分子材料科学与工程,2005,21(5):149-151. 被引量:11
  • 4程茹,郭立红,王伟,黄培.聚酰胺酸薄膜热环化过程热分析[J].塑料工业,2005,33(12):32-34. 被引量:2
  • 5Kreu JA, Hsiao BS, Renner CA, et ai. Crystalline homopolyim- ides and copolyimides derived from 3,3'4, 4'-biphenyltetracar- boxylic dianhydride/1,3-bis (4 aminnophenoxy) benzene/1, 12- dodecanediamine[J]. Materials, Preparation, and Characteriza- tion. Macromolecules, 1995,28 (20) : 6926-6930. 被引量:1
  • 6Tamai S, Yamaguchi A, Ohta M. Melt-processable copolyimides based on 4, 4'-bis (3-aminophenoxy) biphenyl [J]. Polymer, 1996,37(16) : 3683-3692. High Performance Polymers,2000, (12) :377-393. 被引量:1
  • 7Shi Z M, Hasegawa M, Shido Y C, et al. Thermo-processable polyimides with high thermo-oxidative stability as derived from oxydiphthalic anhydride and bisphenol a type dianhydride[J]. 被引量:1
  • 8Hergenrother P M, Watson K A, Smith J G, et al. Polyimides from 2, 3, 3r, 4r-biphenyltetraearboxylie clianhydride and aro- matic diamines[J]. Polymer, 2002,43 : 5077-5093. 被引量:1
  • 9Rikio Yokota, Syougo Yamamoto, Shoichiro Yano, et al. Molec- ular design of heat resistant polyimides having excellent proces- sability and high glass transition temperature[J]. High Per- forrnance Polymers, 2001,13 : 61-72. 被引量:1
  • 10Tarnai S, Yamaguchi A, Ohta M. Melt-processible polyimides and their chemical structures[J]. Polymer, 1995,37 (16) : 3683- 3692. 被引量:1

引证文献4

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部