摘要
从材料选型、与底漆配套性试验、磷化膜及磷化工作液检测等方面,论述了脱脂、磷化工艺在电机端罩上应用的试验过程。通过电机端罩采用脱脂、磷化标准的前处理工艺,可以显著增强电机端罩漆膜的附着力及耐腐蚀性能,且该前处理工艺简单,可操作性强,工艺范围宽,不产生有害气体及异味,劳动条件好,在电机表观处理上具有良好的应用价值。
From material selection, and the primer matching test, the work of phosphide membrane and phos- phide liquid detection degreasing, phosphating process applications in the motor-side test are discussed. Motor end cover dcgreasing, phosphating standard pre-treatment process, can significantly enhance the film adhesion and corro- sion resistance. And the pre-treatment process is simple and feasible with wide process range, good working conditions does not produce harmful and smell gas, in the apparent handling of motor,it has good application value.
出处
《电机与控制应用》
北大核心
2009年第6期52-55,共4页
Electric machines & control application
关键词
电机
涂漆前处理
磷化膜
motor
japanning pre-treatment
phosphide membrane
