摘要
结合攀钢IF钢连铸工艺条件,研究了碱性材料、熔剂对保护渣熔化性能的影响和熔速调节剂配加模式,设计出了保护渣配方。工业试验表明,研制的预熔保护渣用于IF钢浇铸时,在结晶器内熔化良好,试验铸坯表面无清理率达到98.5%,铸坯增碳控制在2×10-6左右(质量分数)。
In light of the actual conditions of IF steel continuous casting in Panzhihua I-ron and Steel Company （PZHISC）, an ingredient of the mold powder is designed and developed through the research upon effect of the basic materials and fluxes on the melt properties of mold powder as well as studies on the mode of preparation of the melting speed control materials. Industrial experiment has shown that the newly developed pre-fused mold powder can meet the demand of IF steel casting process in PZHISC, and it shows excellent properties such as a good melting behavior in mold and high rate of free of slab surface conditioning （98. 5%） and less carbon pick-up （carbon pick-up in strand is controlled within the limit of about 2×10^-6）.
出处
《炼钢》
CAS
北大核心
2009年第1期66-69,78,共5页
Steelmaking
关键词
IF钢
连铸保护渣
熔速调节剂
增碳
IF steel,mold powder, control materials of melting speed, carbon pick-up
