期刊文献+

尖锐V形切口脆断准则研究的进展

Recent Progress of Brittle Fracture Criteria for Sharp V-notch
下载PDF
导出
摘要 介绍在线弹性断裂力学基础上单奇异性V形切口脆性断裂准则研究的进展。把复合型V形切口脆性断裂准则分为应力参数型和能量参数型,并重点综述这两类准则的研究现状、适用性和局限性,讨论了特征距离的确定,展望了V形切口断裂准则将来可能的研究方向,指出Ⅱ型成分占主导的复合型V形问题,断裂机制和准则,在理论与实验上还需进一步研究。 Based on the linear elasticity fracture mechanics, the progress of brittle fracture criteria of single singular V-notches was introduced. Brittle fracture criteria of planar mixed V-notches were grouped into stress- parameter and energy-parameter modes. Recent progress, applicabilities and limitations of both criteria were mainly summarized, and the determination of characteristic distance was discussed. At last, the future possi- ble fields of V-notch fracture criteria were prospected and it is pointed out that fracture principles and criteria of mixed V-notches,in which type Ⅱ is the major one, need further theoretical and experimental research.
出处 《上海工程技术大学学报》 CAS 2008年第3期258-264,共7页 Journal of Shanghai University of Engineering Science
基金 国家自然科学基金资助项目(10602023) 上海市教委科研创新项目(08YZ119) 上海市高校选拔培养优秀青年教师科研专项基金资助项目(05XPYQ32)
关键词 V形切口 脆断准则 切口应力强度因子 V-notch brittle fracture criterion notch stress intensity factor
  • 相关文献

参考文献33

  • 1MAURO F. Stress gradient calculations at notches [J]. International Journal of Fatigue, 2000, 22(5): 397 - 409. 被引量:1
  • 2LI Z H, GUO W L, KUANG Z B. Three-dimensional elastic stress fields near notches in finite thickness plates [J ]. International Journal of Solids and Structures, 2000, 37(51): 7617-7631. 被引量:1
  • 3WILLIAMS M L. Stress singularities resulting from various boundary conditions in angular corners of plates in tension[J ]. Journal of Applied Mechanics, 1952, (19): 526-528. 被引量:1
  • 4梁拥成,刘一华,刘小妹.一种确定应力强度因子的数值方法[J].合肥工业大学学报(自然科学版),2003,26(4):546-549. 被引量:7
  • 5刘小妹,刘一华,梁拥成.一种确定双重应力强度因子的数值方法[J].上海工程技术大学学报,2005,19(2):103-107. 被引量:2
  • 6WILLIAMS J G. Fracture mechanics of polymers [ M]. Ellis Horwood: Chrichester, 1984. 被引量:1
  • 7GUO W L, WANG C H, FRANCIS R. Elastoplastic analysis of notch-tip fields in strain hardening material [ M]. Victoria: Department of Defence, 1998. 被引量:1
  • 8LEE B W, JANG J, KWON D. Evaluation of fracture toughness using small notched specimens[J]. Materials Science and Engineering, 2002, 334(1) : 207 -214. 被引量:1
  • 9KUANG Z B, XU X P. Singular behavior of a sharp V-notch tip in power hardening material[M]. Amsterdam: Norh-holland, 1986 : 73-80. 被引量:1
  • 10苏世清,匡震邦.V-型切口试样脆断准则的研究[J].上海交通大学学报,1990,24(5):89-96. 被引量:10

二级参考文献61

  • 1刘小妹,刘一华,梁拥成.V型切口脆性断裂的最大周向应力准则[J].合肥工业大学学报(自然科学版),2004,27(9):1043-1046. 被引量:6
  • 2梁拥成,郭万林,刘一华,刘小妹.Ⅰ-Ⅱ复合型尖V形切口脆断准则[J].应用力学学报,2006,23(3):403-409. 被引量:9
  • 3杨晓翔,毛银杰,匡震邦.V形切口的断裂研究[J].固体力学学报,1996,17(4):353-359. 被引量:9
  • 4左宏,郑长卿.Ⅰ-Ⅱ 复合型韧断特征及机理的试验研究[J].机械强度,1997,19(1):62-65. 被引量:7
  • 5[1]Kuang Z B, Xu X P.Singular behavior of a sharp V-notch tip in power hardening material[A].Sih G C, Nisitani H, Ishihara T.Role of Fracture Mechanics in Modern Technology[C].North-Holland,1986. 被引量:1
  • 6[3]Seweryn A. Brittle fracture criterion for structures with sharp notches[J].Engineering Fracture Mechanics,1994,47(5):673-681. 被引量:1
  • 7[4]Novozhilov V V. On necessary and sufficient criterion of brittle fracture[J].(in Russian) Prikl Mat Mek,1969,33:212-216. 被引量:1
  • 8[6]Strandberg M. Upper bounds for the notch intensity factor for some geometries and their use in general interpolation formulae[J].Engineering Fracture Mechanics,2001,68:577-585. 被引量:1
  • 9Tan C L, Gao Y L, Afagh F F. Boundary element analysis of interface cracks between dissimilar anisotropic materials[J].International Journal of Solids and Structures, 1992,29(24):3201-3220. 被引量:1
  • 10Wu Y L. A new method for evaluation of stress intensities for interface cracks[J]. Engineering Fracture Mechanics, 1994,48(6):755--761. 被引量:1

共引文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部