期刊文献+

概率约束评估的功能度量法的混沌控制 被引量:2

Chaos control of performance measure approach for evaluation of probabilistic constraints
下载PDF
导出
摘要 功能度量法是基于可靠度的结构优化设计中评估概率约束的一种方法,其改进均值(AMV)迭代格式具有简洁、高效的优点,但对一些非线性功能函数搜索最小功能目标点时可能陷入周期振荡或混沌解,本文利用混沌反馈控制的稳定转换法对功能度量法的AMV迭代格式实施收敛控制。首先展示一些功能函数应用功能度量法AMV格式迭代计算产生了周期解和混沌解现象,并对迭代算法进行了混沌动力学分析。然后利用稳定转换法对功能度量法迭代失败的参数区间进行混沌控制,使嵌入周期和混沌轨道的不稳定不动点稳定化,获得了稳定收敛解,实现了迭代解的周期振荡、分岔和混沌控制。 Performance measure approach (PMA) is a recently proposed method for evaluation of proba bilistic constraints in reliability based design optimization. The advanced mean-value (AMV) method is well suitable for PMA due to its simplicity and efficiency, However, when the AMV iterative scheme is applied to search for the minimum performance target point for some nonlinear performance functions, the iterative sequences could fall into the periodic oscillation and even chaotic state. The convergence control of AMV procedure of PMA is implemented by the stability transformation method of chaos feedback control in the present paper. Firstly, it is illustrated that using the AMV iterative scheme the iterative solution generates the phenomenon of periodic oscillation and chaos for some performance functions. And the chaotic dynamics analysis on this iterative procedure is performed. Then, the stability transformation method is employed for the chaos control of solution in the parameter interval in which the iterative scheme of AMV fails. The numerical results demonstrate that the control of periodic oscillation, bifurcation and chaos for AMV iterative procedure is achieved, and the expected stable convergent solutions are obtained.
作者 杨迪雄 易平
出处 《计算力学学报》 EI CAS CSCD 北大核心 2008年第5期647-653,共7页 Chinese Journal of Computational Mechanics
基金 国家自然科学基金(10421002 10672030) 国家重点基础研究发展计划(2006CB601205)资助项目
关键词 概率设计 功能度量法 AMV迭代格式 收敛失败 混沌动力学 稳定转换法 probabilistie design performance measure approach AMV iterative procedure convergent failure chaotic dynamics stability transformation method
  • 相关文献

参考文献16

  • 1TU J, CHOI K K, YOUNG H P. A new study on reliability-based design optimization [ J ]. ASME Journal of Mechanical Design, 1999, 121 (4) : 557- 564. 被引量:1
  • 2程耿东,许林.基于可靠度的结构优化的序列近似规划算法[J].计算力学学报,2006,23(6):641-646. 被引量:29
  • 3DER Kiureghian, ZHANG Y, LI C C. Inverse reliability problem [J ]. ASCE Journal of Engineering Mechanics, 1994,120(5) : 1154-1159. 被引量:1
  • 4LI H, FOSCHI R O. An inverse reliability method and its application[J]. Structural Safety, 1998,20 (3):257-270. 被引量:1
  • 5LEE T W, KWAK B M. A reliability-based optimal design using advanced first order second moment method[J]. Mechanics of Structures and Machines, 1987-88,15(4) : 523-542. 被引量:1
  • 6KIRJNER-NETO C, POLAK E, KIUREGHIAN A D. An outer approximations approach to reliabilitybased optimum design of structures[J]. Journal of Optimization Theory and Applications, 1998, 98 (1) : 1-16 被引量:1
  • 7LEE J O, YANG Y S, RUY W S. A comparative study on reliability-index and target-performancebased probabilistic structural design optimization[J]. Computers and Structures, 2002,80(4) :257-269. 被引量:1
  • 8YOUN B D, CHOI K K, PARK Y H. Hybrid analysis method for reliability based design optimization [J]. ASME Journal of Mechanical Design, 2003, 125(3) :221-232. 被引量:1
  • 9YOUN B D, CHOI K K. An investigation of nonlinearity of reliability-based design optimization approaches[J]. ASME Journal of Mechanical Design, 2004,126(5) :403-411. 被引量:1
  • 10DU X P, SUDJIANTO A, CHEN W. An integrated framework for optimization under uncertainty using inverse reliability strategy[J]. ASME Journal of Mechanical Design, 2004,126(7) : 562-570. 被引量:1

二级参考文献32

  • 1杨迪雄,许林,李刚.结构可靠度FORM方法的混沌动力学分析[J].力学学报,2005,37(6):799-804. 被引量:9
  • 2ENEVOLDSEN I,SORENSEN J D.ReliabilityBased optimization in structural engineering[J ].Structural Safety,1994,15:169-196. 被引量:1
  • 3PEDERSEN C.Interactive Reliability-Based Optimization of Structural Systems[D].Aalborg University,1996. 被引量:1
  • 4CHANDU S V L,GRANDHI R V.General purpose procedure for reliability based structural optimization under parametric uncertainties[J].Advances in Engineering Software,1995,23(1):7-14. 被引量:1
  • 5GRANDHI R V,WANG L P.Reliability-based structural optimization using improved two-point adaptive nonlinear approximations[J].Finite Elements in Analysis and Design,1998,29(1):35-48. 被引量:1
  • 6GASSER M,SCHUELLER G I.Reliability-Based optimization of structural systems[J].Mathematical Methods of Operations Research,1997,46:287-307. 被引量:1
  • 7TU J,CHOI K K,PARK Y H.A new study on reliability-based design optimization[J].Journal of Mechanical Design,1999,121:557-564. 被引量:1
  • 8LEE T W,KWAK B M.A reliability-based optimal design using advanced first order second moment method[J].Mechanics of Structures & Machines,1987,15(4):523-542. 被引量:1
  • 9KIRJNER-NETO C,POLAK E,KIUREGHIAN A D.An outer approximations approach to reliabilitybased optimal design of structures[J].Journal of Optimization Theory and Applications,1998,98:1-16. 被引量:1
  • 10KIUREGHIAN A D,POLAK E.Reliability-Based optimal design:A Decoupled Approach[A].A.S.Nowak,Reliability and Optimization of Structural Systems[C].Crafters,Chelsea,Mich,1998:197-205. 被引量:1

共引文献35

同被引文献31

  • 1程耿东,许林.基于可靠度的结构优化的序列近似规划算法[J].计算力学学报,2006,23(6):641-646. 被引量:29
  • 2Hasofer A M,Lind N C. Exact and invariant second- moment code format[J]. Journal of the Engineering Mechanics Division, 1974,100(1) : 111-121. 被引量:1
  • 3Tu J,Choi K K,Park Y H. A new study on reliability- based design optimization[J]. Journal of Mechanical Design, 1999,121 (4) : 557-564. 被引量:1
  • 4Der Kjureghian, Zhang Y, Li C C. Inverse reliability problem[J]. ASCE Journal of Engineering Mecha- nics, 1994,120(5) : 1154-1159. 被引量:1
  • 5Li H,Foschi R O. An inverse reliability method and its application [J]. Structural Safety, 1989,20: 257- 270. 被引量:1
  • 6Lee T W, Kwak B M. A reliability-based optimal de- sign using advanced first order second moment mthod [J]. Mech Struct Safety, 1998,20 : 257-270. 被引量:1
  • 7Kirjner-Neto C, Polak E, Kijurehian A D. An outer approximations approach to reliability-based optimaldesign of structures[J]. Journal of Optimization The- ory and Applications, 1998,98 ( 1 ) : 1-16. 被引量:1
  • 8Youn B D, Choi K K, Park Y H. Hybird analysis method for reliability-based design optimization[]]. J Mech Des,ASME,2003,125(2) :221-232. 被引量:1
  • 9Youn B D,Choi K K. An investigation of nonlinearity of reliability-based design optimization approaches [J]. Journal of Mechanical Design, 2004,126: 403- 411. 被引量:1
  • 10Wu Y T,Millwater H R,Cruse T A. Advanced prob- abilistic structural analysis method for implicit per- formance functions[]]. AIAA Journal, 1990,9 : 1663. 被引量:1

引证文献2

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部