摘要
采用三层共挤吹塑工艺制备了聚乙烯(PE)保鲜膜。其中.A(表层)、B(芯层)、C(表层)各层添加3.0份的遮光及抗紫外线母料;表层(A,C层)的高密度聚乙烯与低密度聚乙烯质量比为1:1;芯层(B层)线性低密度聚乙烯、边角料、CaCO_3质量比为100:15:30。适当的工艺条件下吹塑的PE隔离保鲜膜对80～100℃的轮胎成型前的胶片隔离、保鲜效果好。
By 3-layer co-extrusion , PE isolation ＆ fresh-keeping film was prepared. Shading and anti-UV agent in A（surface layer） ,B（corn layer）, C（surface layer） layer of film are added 3.0 phr respectively. The mass ratio of HDPE and LDPE in surface layer （A, C layer） is 1 ： 1, and the mass ratio of LLDPE, production process scrap and CaCO3 in core layer （B layer）is 100 ： 15 ： 30 . For 80-100 ℃ tire-sheet before forming of tire, PE isolation ＆ fresh-keeping film blown under proper process condition has good isolation ＆ fresh-keeping properties.
出处
《现代塑料加工应用》
CAS
北大核心
2008年第4期50-52,共3页
Modern Plastics Processing and Applications
基金
2006年福州市科技计划项目(2006-2-044)。
关键词
三层共挤
聚乙烯隔离膜
轮胎
胶片
保鲜
three-layer co-extrusion
polyethylene isolation film
tire
tire-sheet
freshkeeping
