期刊文献+

Z-pins增强陶瓷基复合材料单搭接接头的裂纹尖端能量释放率 被引量:5

Strain Energy Release Rate of Z-pins Reinforced Ceramic Matrix Composite Single Lap Joint at Crack Tips
下载PDF
导出
摘要 对典型Z-pins增强陶瓷基复合材料单搭接接头的裂纹尖端能量释放率进行了数值模拟,重点研究Z-pins在不同直径和间距下裂纹尖端能量释放率随裂纹扩展的变化规律。研究发现能够形成桥联的Z-pins具有一定抑制开裂的能力,形成桥联后,Z-pins的直径对于裂纹尖端能量释放率的影响较大,而Z-pins的间距对于裂纹尖端能量释放率也有影响,但当间距小到某一限度时,再减小间距裂纹尖端能量释放率基本保持不变。 Energy release rate of the single lap joint reinforced by Z-pins at crack tip is investigated, especially for different diameter and density of z-pins. Energy release rate completely reflects the effect of restraining crack growing, and the restraining extent is related with Z-pins diameter and density. Z-pins density gets great enough, restraining effect remains almost steady.
机构地区 西北工业大学
出处 《应用力学学报》 EI CAS CSCD 北大核心 2008年第2期347-350,共4页 Chinese Journal of Applied Mechanics
基金 自然科学基金(90405015) 高等学校博士学科点专项科研基金(20030699040)
关键词 陶瓷基复合材料 连接 Z-PINS 能量释放率 ceramic matrix composite, joint, Z-pins, energy release rate
  • 相关文献

参考文献14

  • 1刘韡,矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007,24(1):86-90. 被引量:12
  • 2刘韦华,矫桂琼.Z向增强陶瓷基复合材料拉伸性能研究[C]//中国复合材料大会.宜昌,2006. 被引量:1
  • 3Denis D R Carrie, Manos Troulis, Ivana K P. Delamlnation of Z-pinned carbon fiber reinforced laminates[J]. Composite science and technology,2006, 66(6) : 855-861. 被引量:1
  • 4Marcello Grassixiang Zhang. Finite element analyses of mode Ⅰ interlaminar delamination in Z-fiber reinforced composite laminates[J]. Composite and science and technology, 2003, 63: 1815-1832. 被引量:1
  • 5Partnidge I K,Cartie D D R,Bonnington T. Delammination resistance laminates by Z-fiber pinning h Manufacture and performance of Z-pinned composites[J]. Composite Part A, 2005, 36(1): 55-64. 被引量:1
  • 6Rugg K L, Cox B N. Mixed mode delamination of polymer composite laminates reinforced through the thickness by Z-fibers[J]. Composite Part A, 2002, 33(2): 177-288. 被引量:1
  • 7Palazotto A N. Low velocity impact damage characteristics of Z-flber reinforced sandwich panels an experimental study[J]. Composite structure, 1998, 43(4):275-288. 被引量:1
  • 8Ivana K Partridge. Delamination behavior of Z-pinned laminates[J]. European structure integrity society, 2007, 27: 27- 36. 被引量:1
  • 9Newaz G M. compitaition analysis of mixed-mode delamination crack growth in a woven laminated ceramlc-matrix composite [J]. Composite and science and technology, 1999, 59 (5): 2287-2292. 被引量:1
  • 10Gregory N Morscher. Modeling stress-dependent matrix cracking and stress-strain behavior In 2D woven SIC fiber reinforced CVI SIC composite[J]. Composite and science and technology, 2007 67(6) : 1009-1017. 被引量:1

二级参考文献14

  • 1管国阳,矫桂琼,张增光.2D-C/SiC复合材料的宏观拉压特性和失效模式[J].复合材料学报,2005,22(4):81-85. 被引量:52
  • 2郭正,赵稼祥.碳/碳复合材料的研究与发展[J].宇航材料工艺,1995,25(5):1-7. 被引量:54
  • 3任学佑,马福康.碳/碳复合材料的发展前景[J].材料导报,1996,10(2):72-75. 被引量:14
  • 4Wang Mingde,Laird C.Damage and fracture of a cross woven C/SiC composite subjeet to compression loading[J].Journal of Materials Science.1996.31(8):2065-2069. 被引量:1
  • 5Keith W P.Kedward K T.Shear damage mechanisms in a woven nicalon-reinforred ceramic-matrix composite[J].Journal of the American Ceramic Society.1997.80(2).357-364. 被引量:1
  • 6Mignery L.A.Tan T M.Sun C T.The use of stitch to suppress delamination in laminated composite[C]//ASTM.Philadelphia:American Society for Testiong and Materials.1985:371-385. 被引量:1
  • 7Dow M B.Dexter H B,Development of stitched.braided and woven composite structures in the ACT program and at Langley Research Center(1985 to 1997)Summary and bibliongraphy.NASA TP-97-206234[R].Hampton,Virginia:NASA.1997. 被引量:1
  • 8Freitas G.Magee C.Dardzinski P.et al .Fiber insertion process for impruved damage tolerance in airerafi laminates [J].Journal Advanced Material.1994.25(4):36-43. 被引量:1
  • 9Partridge I K.Cartie D D R,Delanination resistant laminates by Z fiber pinning 1:Manufacture and fracture performance[J].Composites Part A.2005.36(1):55-64. 被引量:1
  • 10Ratcliffe J G,O'Brien T K.Discrete spring model for predicting delamination growth in Z-fiber reinforced DCB specimens NASA/TM-2004-213019[R].Hampton.Virgima:ANSA,2004. 被引量:1

共引文献23

同被引文献38

  • 1韩立军,李铁虎,刘建军,邱海鹏,丁海英.采用Z-Pin增强体的3D炭/炭复合材料层间断裂行为(英文)[J].新型炭材料,2004,19(2):97-102. 被引量:5
  • 2刘韡,矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007,24(1):86-90. 被引量:12
  • 3孙先念,郑长良.层合复合材料z-pinning增强技术的力学进展[J].航空学报,2006,27(6):1194-1202. 被引量:27
  • 4VAIDYA U K, DUNCAN B, KOPACZ J. Affordable processing and characterization of multi-functional z-pin rein- forced VARTM composites [ C]// Proceedings of the 13th international conference on composite materials, Beijing, 25 - 29 June 2001. 214. 被引量:1
  • 5CHANG P, MOURITZ A P, COX B N. Flexural properties of z-pinned laminates [ J ]. Composites A , 2007, 38 (2) : 244 -251. 被引量:1
  • 6MOURITZ A P. Compression properties of z-pinned composite laminates [ J ]. Composites Science Technology, 2007, 67(15-16): 3110-3120. 被引量:1
  • 7MOURITZ A P. Review of z-pinned composites laminates [J]. Composites A, 2007, 38(12): 2383-2397. 被引量:1
  • 8FREITAS G, FUSCO T, CAMPBELL T, et al. Z-Fibre technology and products for enhancing composite design [ C]//Proceedings of the 83rd meeting of the AGARD SMP conference on bolted/bonded joints in polymeric composites, Florence Italy, 2 - 3 September, 1996. 被引量:1
  • 9MARASCO A I. Analysis and evaluation of mechanical performance of reinforced sandwich structures: X-Cor^TM and K-Cor^TM [ D ]. London : Cranfield University, 2005. 被引量:1
  • 10FREITAS G, MAGEE C, DARDZINSKI P, et al. Fiber insertion process for improved damage tolerance in aircraft laminates [ J]. Journal Advanced Material, 1994, 25 (4) : 36 -43. 被引量:1

引证文献5

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部