期刊文献+

新阻燃剂磷酸三(2-羟基)丙基酯锑的合成及性质 被引量:2

THE SYNTHESIS OF ANTIMONY TRI(2-HYDROXY)-PROPYLPHOSPHORATE AND PROPERTY
下载PDF
导出
摘要 将环氧丙烷与磷酸反应,首次合成磷酸三(2-羟基)丙基酯,再将其与三氧化二锑反应,得出一种新型锑-磷复合阻燃剂——磷酸三(2-羟基)丙基酯锑;研究了反应体系酸度、反应温度及反应时间等因素对反应产率的影响;制得的产品经化学分析、红外光谱等测试,证明了化合物的结构为CH_3CH(OH)CH_2OP(O)[OCH_2CHO(CH_3)]_2SbOH。将其添加于氯丁橡胶及环氧树脂中,当该阻燃剂用量达到12.5%时,阻燃制品氧指数分别可达到38,39;实验结果表明,将反应体系pH控制在5.5左右、反应温度100℃、反应5h时,可制得阻燃抑烟性能优良的产品,产率达到89%。 With epoxypropane and phosphonic acid, tri(2-hydroxy) propylphosphorate is made for the first time, and it is made into a new complex retardant——antimony tri(2-hydroxy) propylphosphorate. The acidity of the reacting condition, the temperature and the time have been investigated. Some physical and chemical data of the retardant are reported, which prove that the structure is CH_3CH(OH)CH_2OP(O)[OCH_2CHO(CH_3)]_2SbOH. It is put into neoprene and epoxy resin, when the retardant content amounts to 12.5%, the LOI of the samples are 38, 39. The results show that when the acidity of the reacting condition is 5.5, the temperature is 100℃ and the time is 5.0 h, the excellent retardant can be made.
出处 《中南工业大学学报》 CSCD 北大核心 1997年第5期504-506,共3页 Journal of Central South University of Technology(Natural Science)
基金 中国有色金属工业总公司"八五"重点攻关资助项目
关键词 羟基 磷酸三丙基酯锑 阻燃剂 合成 antimony tri(2-hydroxy)prophylphosphorate retardant synthesis
  • 相关文献

参考文献2

共引文献4

同被引文献16

  • 1Qu Long,Zhang Min,Li Li,Shu Wanyin(Department of Chemistry,Central South University of Technology, Changsha 410083).SYNTHESIS AND APPLICATION OF ANTIMONY N,N-DIETHYLDITHIOCARBAMATE[J].中国有色金属学会会刊:英文版,1996,6(3):54-57. 被引量:1
  • 2唐慧安,王流芳,闫世才,李晴宇.测定酸性磷酸酯的新试剂荧光素单磷酸酯镁的合成[J].化学试剂,1996,18(3):179-180. 被引量:2
  • 3Kwak D J,Park M W,Sung Y M. Discharge power dependence of structural and electrical properties of Al-doped ZnO conducting film by magnetron sputtering ( for PDP) [ J ]. Vacuum, 2008,83 : 113 -118. 被引量:1
  • 4Fortunato E, Ginley D, Hosono H,et al. Transparent conducting oxides for photovoltaic [ J ]. MRS Bu11,2007,32 : 242 - 247. 被引量:1
  • 5Granqvist C G. Transparent conductors as solar energy materials:a panoramic review[ J]. Sol Energy Mater Sol Cells, 2007,91 : 1529 - 1598. 被引量:1
  • 6Hassoun J,Derrien G,Panero S,et al. A SnSb -C nanocomposite as high performance electrode for lithium ion batteries [ J 1. Electrochim Acta, 2009,54:4441 - 4444. 被引量:1
  • 7Zhang M,Singh R P. Mechanical reinforcement of unsaturated polyester by A12 03 nanoparticles [ J ]. Mater Lett, 2005,58 : 408 - 412. 被引量:1
  • 8Bauer F, Glasel H J, Decker U, et al. Trialkoxysilane grafting onto nanoparticles for the preparation of clear coat polyaerylate systems with excellent scratch performance [ J ]. Prog Org Coat,2003,47 : 147 - 153. 被引量:1
  • 9Guo Zhanhu, Pereira Tony, Choi Oyoung, et al. Surface functionalized alumina nanoparticle filled polymeric nanocomposites with enhanced mechanical properties[ J ]. Journal of Materials Chemistry ,2006,16:2800 - 2808. 被引量:1
  • 10Sondi I,Fedynyshyn T H,Sinta R,et al. Encapsulation of nanosized silica by in situ polymerization of tert-butyl acrylate monomer [ J 1. Langmuir,2000,16 ( 23 ) :9031 - 9034. 被引量:1

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部