期刊文献+

基于信号产生器的幅相误差分析与校正 被引量:5

Analysis and Calibration of Amplitude and Phase Errors in Signal Generator
下载PDF
导出
摘要 信号产生器是雷达发射机中的关键部件。针对线性调频信号产生器,文中分析了系统的幅相误差来源以及误差对产生信号质量的影响,并建立了系统的幅相误差模型;在此基础上,分别提出了相应的幅度和相位校正措施,给出了具体的校正实现结构。仿真实验结果表明:提出的系统幅相校正方法能够有效地补偿引入的幅度和相位误差。 Signal generator is one of the key components in radar transmitter. In this paper the possible sources and the influences of the amplitude and phase errors are analyzed in the linear frequency modulated ( LFM ) signal generator system, respectively. The model of the amplitude and phase errors of system is constructed. At the same time based on the errors analyzed, the calibration measures of the amplitude and phase is proposed, respectively, particular realization structures are given. The simulation and experiment results show that the amplitude and phase errors can be compensated effectively by means of the proposed method.
出处 《现代雷达》 CSCD 北大核心 2007年第12期101-104,108,共5页 Modern Radar
关键词 信号产生器 线性调频信号 幅相误差 D/A转换 脉冲压缩 signal generator LFM amplitude and phase errors DAC pulse compression
  • 相关文献

参考文献6

  • 1Tierney J, Rader C M, Gold B. A digital frequency synthesizer [ J ]. IEEE trans. Audio Electroacoust, 1971,19 ( 1 ) : 48 -57. 被引量:1
  • 2李衍忠..超宽带脉压雷达信号产生系统研究[D].电子科技大学,2000:
  • 3Matthew L Welborn, John C. Ankcorn. waveform synthesis for transmission of complex waveforms [ C ]// IEEE Radio and Wireless Conference, [ s. l. ] : IEEE Press, 1999:121 124. 被引量:1
  • 4Bruce J W, Stubberud P. An analysis of harmonic distortion and integral nonlinearity in digital to analog converters [ C ]. 42nd Midwest Symposium on Circuits and Systems, [ s. l. ] : IEEE Press, 2000,1:470 - 473. 被引量:1
  • 5XinPing Huang, Mario Caron. Gain/phase imbalance and DC offset compensation in quadrature modulators [ C ]. IEEE International Symposium on Circuits and Systems, 2002, 4 : 811 -814. 被引量:1
  • 6王银芳,周智敏.线性调频信号的平坦度对脉冲压缩性能的影响[J].雷达科学与技术,2003,1(2):100-103. 被引量:4

二级参考文献2

共引文献3

同被引文献28

引证文献5

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部