摘要
采用铅锌尾矿为原料来烧制中热硅酸盐水泥熟料。用差热分析测定熟料的易烧性;用X射线衍射分析研究了熟料的矿物组成;采用扫描电镜研究了矿物的晶体形貌;用热导式等温量热仪测量中热水泥的水化热。实验结果表明,使用铅锌尾矿来配料,可提高熟料的易烧性,矿物形成良好,并且水化热符合国家标准。
In this article, lead-zinc tailing was used as raw material to prepare middle heat clinker. The easiness of burning was tested by the differential scanning calorimetry（DSC）. The content of clinker was determined by X-ray diffraction （XRD） and the shape of the silicates crystal was investigated by scanning electron microscope. The hydrating heating was tested by the isothermal calorimeter. The results show that using lead-zinc tailing to prepare cement clinker can reduce the eutectic point; the silicate crystal was well formed and the hydrating heat was accord with the standard.
出处
《硅酸盐通报》
CAS
CSCD
北大核心
2007年第5期929-934,共6页
Bulletin of the Chinese Ceramic Society
基金
深圳大学深圳市土木工程耐久性重点实验室开放基金资助(CED07-037)
"十一五"国家科技支撑计划"高性能水泥绿色制造工艺和装备"课题(2006BAF02A24)
关键词
铅锌尾矿
中热水泥
熟料
水化热
lead-zinc tailing
middle heat cement
clinker
hydrating heat
