期刊文献+

H_2S分压对SM80SS油管钢腐蚀行为的影响 被引量:6

EFFECT OF H_2S PARTICAL PRESSURE ON CORROSION BEHAVIOR OF SM80SS TUBING STEEL
下载PDF
导出
摘要 通过模拟某气田CO2/H2S共存腐蚀介质环境,对比研究了SM80SS油管钢在加与未加缓蚀剂时的腐蚀特征.结果表明,在未加自制缓蚀剂TG500的腐蚀溶液中,SM80SS油管钢的腐蚀速率随H2S分压的升高而缓慢增加;当溶液中加入TG500(浓度200 mg/L)后,SM80SS钢的腐蚀速率显著降低、且随着H2S分压的增加明显下降,而缓蚀效率却呈上升趋势,均达90%以上. In CO2/H2S containing corrosive agueous solutions, the corrosion behavior of SM80SS tubing steel was studied. The results show that corrosion rate of SM80SS tubing steel increases smothly with in-creasing HES partical pressure. When the inhibitor TG500 200 mg/L has been added into the corrosive solutions,the corrosion rate of SM80SS tubing steel decreases clearly with increasing HES partical pressure, however the inhibition efficiency increases ,which is above 90% for all cases.
作者 张玉芳
机构地区 北京服装学院
出处 《腐蚀科学与防护技术》 CAS CSCD 北大核心 2007年第4期290-292,共3页 Corrosion Science and Protection Technology
关键词 CO2/H2S腐蚀 缓蚀剂 油管钢 CO2/H2S corrosion inhibitor tubing steel
  • 相关文献

参考文献8

二级参考文献12

共引文献115

同被引文献85

引证文献6

二级引证文献70

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部