期刊文献+

Nb对690镍合金焊条熔敷金属DDC敏感性影响 被引量:6

Influence of Nb on ductility dip cracking sensitivity for 690 nickel alloy electrode deposited metal
下载PDF
导出
摘要 采用应变开裂试验研究了Nb对Inconel690焊条熔敷金属失塑裂纹敏感性的影响。结果表明,Nb在熔敷金属中主要以碳化物的形式存在于晶界上,起到了阻碍晶界滑移的作用,降低了材料DDC敏感性,但是当含量超过一定值以后,出现了局部液化现象,其最佳含量为1.73%。 The influence of Nb on the ductility dip cracking sensitivity for Inconel 690 nickel alloy electrode deposited metal was studied by a-dbpting strain-to-fracture experiment. The results show that Nb existed in grain boundary in the form of carbide, which inhibited the sliding ofgrain boundary and decreased the ductility dip cracking sensitivity, but local liquation phenomena occurred when the content of Nb exceeded acertain value. The optimum content of Nb is 1. 73wt. %.
出处 《焊接》 北大核心 2007年第2期55-58,共4页 Welding & Joining
关键词 应变开裂试验 INCONEL 690 镍合金焊条 失塑裂纹 strain-to-fracture, Inconel 690 electrode, ductility dip cracking
  • 相关文献

参考文献5

  • 1黄乾尧 李汉康.高温合金[M].北京:冶金工业出版社,2002.24. 被引量:28
  • 2周振丰.焊接冶金与金属焊接性[M].北京:机械工业出版社,1992.. 被引量:18
  • 3Nissley N E,Lippold L C.Development of the strain-to-fracture test[J].Welding Journal,2003,(12):355s-364s. 被引量:1
  • 4Collins M G,Lippold J C.Quantifying ductility-dip cracking susceptibility in nickel-base weld metals using the strain-to-fracture test[J].Trends in Welding Research,2003.586-590. 被引量:1
  • 5Kikel J M,Parker D M.Ductility dip cracking susceptibility of filler metal 52 and alloy 690[J].Trends in Welding Research,1998.757-762. 被引量:1

共引文献44

同被引文献33

  • 1吴伟,陈佩寅,张锐.镍基焊接材料高温失塑裂纹的研究现状及研究趋势[J].焊接,2005(5):5-8. 被引量:18
  • 2薄春雨,杨玉亭,李向阳,周世峰.Nb对690镍合金带极堆焊金属结晶裂纹的影响[J].焊接,2006(6):41-45. 被引量:4
  • 3Nissley N E, Lippold J C, Ductility-Dip. Cracking suscepti- bility of nickel-based weld metals. Part 1 : Strain-to-Fracture Testing[J]. Welding Journal, 2008, 87 (10):257-264. 被引量:1
  • 4Nissley N E. Intermediate temperature grain boundary em- brittlement in nickel-based weld metals [ D ]. The Ohio State University: Doctor Dissertation 2006. 被引量:1
  • 5Rhines F N, Wray P J. Investigation of the intermediate temperature ductility minimum in metals [ J ]. Transactions of the ASM, 1961, 54:117 - 128. 被引量:1
  • 6Damkroger B K, Rath B B," Edwards G R. Investigation of high temperature ductility losses in alpha-beta titanium al- loys[ R]. Ft. Belvoir Defense Technical Information Center APR, 1988. 被引量:1
  • 7Arata Y, Matsuda F, Katayama S, Solidification crack sus- ceptibility in weld metals of fully austenitic stainless steels (Report II) [J]. Transactions of JWRI, 1977, 6( 1 ) : 105 -116. 被引量:1
  • 8Nissley N E, Collins M G, Guaytima G, et al. Development of the strain-to-fracture test for evaluating ductility-dip cracking in austenitic stainless steels and Ni-base alloys [J]. Welding in the World, 2002, 46(7/8) : 32 -40. 被引量:1
  • 9Collins M G, Ramirez A J, Lippold J C. An investigation of ductility dip cracking in nickel-based filler materials. Part III: The characteristics of weld-metal grain boundaries asso- ciated with elevated-temperature fracture are investigated [J]. Welding Journal, 2004(2) : 39 -49. 被引量:1
  • 10Collins M G, Lippold J C. An investigation of ductility dip cracking in nickel-based filler materials-Part I: The strain-to-faete lest has been used relationships for ductility dip search, 2003(10) : 288 -295. 被引量:1

引证文献6

二级引证文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部