期刊文献+

单圆盘甘蔗切割器切割破头率影响因素的试验 被引量:29

Experimental Study on Influencing Factors of Broken Biennial Root Rate for a Single Base Cutter of Sugarcane Harvester
下载PDF
导出
摘要 利用甘蔗切割综合试验台,对影响甘蔗切割破头率的因素进行了室内试验。采用数理统计方法及优化、仿真技术,建立了相应的数学模型,探讨了田间因素和结构因素对甘蔗破头率的影响机理。在频率、振幅取最小值和软、硬2种土壤条件下,分别对因素进行了优化,结果表明频率、振幅对破头率影响大,因素较优组合为:刀片刃角21°,刀片切割角30.5°,刀盘倾角11.5°,刀片4片。破头率小于11%。 The experimental investigations for the influencing factors of broken biennial root rate were made by a sugarcane cutter testing rig. A mathematical model was established for describing the effects of the influencing parameters on the broken biennial root rate. The effects of field factors and structure factors on the broken biennial root rate were discussed. The optimization of the broken rate under the condition of the minimum frequency and amplitude, as well as two soil bases, was performed. The results show that the frequency and amplitude have a remarkable influence on the broken biennial root rate. Under the optimal condition, the broken rate is less than 11 percent.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2007年第3期69-74,共6页 Transactions of the Chinese Society for Agricultural Machinery
基金 广西科学基金资助项目(项目编号:0448006)
关键词 甘蔗 切割器 破头率 机理 优化 Sugarcane, Cutter, Broken biennial root rate, Mechanism, Optimization
  • 相关文献

参考文献7

  • 1刘庆庭.甘蔗切割机理[D].广东:华南农业大学,2003. 被引量:6
  • 2Gupta C P,Oduori M F.Design of the revolving knife-type sugarcane basecutter[J].America Society of Agriculture Engineer,1992,35(6):1 747~1 752. 被引量:1
  • 3Oduori M F,Sakai J,Gupta C P.Kinematics of revolving knife-type disk-type sugarcane basecutter-1 fundamental mathematical relationships[J].Agricultural Mechanization in Asia,Africa and Latin America,1992,23 (4):9 ~ 15. 被引量:1
  • 4Kroes S,Harris H D.A kinematics model of the dual base cutter of a sugar cane harvester[J].Journal of Agricultural Engineering Research,1995,62 (3):163 ~ 172. 被引量:1
  • 5王汝贵..甘蔗收割机圆盘式切割器工作参数优化研究[D].广西大学,2004:
  • 6杨坚,梁兆新,莫建霖,王汝贵,古梅英.甘蔗切割器切割质量影响因素的试验研究[J].农业工程学报,2005,21(5):60-64. 被引量:63
  • 7王汝贵,杨坚,梁兆新,莫健霖,古梅英.甘蔗割铺机圆盘切割器工作参数优化及影响分析[J].农机化研究,2004,26(4):144-147. 被引量:13

二级参考文献4

共引文献71

同被引文献305

引证文献29

二级引证文献184

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部