期刊文献+

半结晶性聚合物熔体冷却过程双尺度模拟 被引量:2

Double scale simulation of the cooling stage of semi-crystalline polymer melt
下载PDF
导出
摘要 聚合物的结晶受温度及温度历史影响较大,同时发生结晶又会对聚合物材料温度场产生影响.为了准确模拟冷却过程中温度场和结晶情况,将半结晶性聚合物熔体冷却过程及其结晶过程耦合起来分析,把宏观温度场结果作为介观模拟的输入,再把介观模拟的球晶生长情况作为宏观温度场模拟的输入,可同时得到宏观与介观二个尺度的模拟结果.由于该耦合建立在一定的物理基础上,模拟得到的结果较为合理. The crystallization behavior of a polymer is simultaneously influenced by temperature and temperature experience, but its temperature field is dependent on crystallization. A coupling analysis of cooling and crystallization process was carried out to exactly simulate the temperature field and crystallization behavior of se- mi-crystalline polymer melt. In the coupling method the result of temperature field was considered as the input of crystallization analysis and then the result of spherulites evolution was used as the input of temperature field simulation, so simulation results of the double scales, macroscopic and mesoscopic, was obtained at the same time. Because the coupling analysis has the physical background, the result of numerical simulation can be thought reasonable.
出处 《北京科技大学学报》 EI CAS CSCD 北大核心 2007年第2期186-192,共7页 Journal of University of Science and Technology Beijing
基金 国家自然科学基金重大项目(No.10590352) 国家杰出青年科学基金资助项目(No.10225211)
关键词 聚合物熔体 半结晶 冷却过程 双尺度 模拟 温度场 球晶 polymer melt semi-crystallization cooling process double scale simulation temperature field spherulite
  • 相关文献

参考文献21

  • 1陶文铨编著..数值传热学 第2版[M].西安:西安交通大学出版社,2001:566.
  • 2Kim K H, Isayev A I, Kwon K. Flow-induced crystallization in the injection molding of polymers: a thermodynamic approach. J Appl Polym Sei, 2005, 95(3) :502. 被引量:1
  • 3Pantani R, Coccorullo I, Speranza V, et al. Modeling of morphology evolution in the injection molding process of thermoplastic polymers. Prog Polym Sci, 2005, 30:1185. 被引量:1
  • 4Tanner R I, Qi F Z. A comparison of some models for deseribing polymer crystallization at low deformation rates. J. Non Newtonian Fluid Mech, 2005, 127:131. 被引量:1
  • 5Hieber C A. Modeling/simulating the injection molding of isotaetic polypropylene. Polym Eng Sci, 2002, 42(7): 1387. 被引量:1
  • 6Zuidema H, Peters G W M, Meijer H E H. Influence of cooling rate on PVT-data of semi-crystalline polymers. J Appl Polym Sei,2001, 82(5): 1170. 被引量:1
  • 7Guo J, Narh K A. Computer simulation of stress-induced crystallization in injection molded thermoplastics. Polym Eng Sci, 2001,41(11): 1996. 被引量:1
  • 8Nakamura K, Watanable T, Katayama K, et al. Some aspects of non-isothermal crystallization of polymers. I . Relation between crystallization temperature, erystallinity and cooling conditions. J Appl Polym Sci, 1972, 16:1077. 被引量:1
  • 9Di Lorenzo M L, Silvestre C. Non-isothermal crystallization of polymers. Prog Polym Sei, 1999, 24:917. 被引量:1
  • 10殷敬华,莫志深主编..现代高分子物理学 上[M].北京:科学出版社,2001:408.

同被引文献22

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部