摘要
目的:研究超临界CO2萃取三七脂溶性成分的萃取工艺。方法:在单因素实验的基础上,采用均匀设计方法考察萃取压力、萃取温度、分离压力、分离温度对萃取收率的影响。结果:较佳萃取工艺条件为:萃取压力30 MPa,萃取温度48℃,分离釜Ⅰ压力8 MPa、分离温度30℃,分离釜Ⅱ压力5 MPa、分离温度30℃,萃取时间2.0 h,CO2流量35 L/h,三七颗粒度60目。结论:用超临界CO2萃取三七,可以较好的获得其脂溶性成分,提取物可以供进一步深入研究。
Objective ：To establish the process of supercritical CO2 extraction （SFE-CO2） of lipophilic fraction from Panax notoginseng. Methods： The process was studied by using even-designod method. The experiment was taken in these 4 factors： Extracting pressure, extracting temperature, releasing pressure and releasing temperature, each factor under experiments on 7 levels respectively. Results ：The optimized SFE-C02 extraction conditions were 30 MPa, extraction pressure; 48℃, extraction temperature; 8 MPa, release pressure; 30℃, release temperature; 2. Oh, extraction time; 35 L/h, the flow rate of CO2. Conclusion：This study provides foundation for the exploitation of the resources of Panax notoginseng.
出处
《安徽中医学院学报》
CAS
2007年第1期46-49,共4页
Journal of Anhui Traditional Chinese Medical College
基金
安徽省人才开发基金项目(2005Z035)
关键词
超临界CO2萃取
三七
脂漆性成分
均匀设计
工艺研究
Supereritical CO2 extraction
Panax notoginseng
Lipophilic fraction
Even-designod method
Process research
