Numerical simulation for thermal flow filling process of casting
被引量：7
Numerical simulation for thermal flow filling process of casting
出处
《中国有色金属学会会刊：英文版》
CSCD
2006年第A02期214-218,共5页
Transactions of Nonferrous Metals Society of China
关键词
铸造 热流 数值模拟 浇注过程 自由面 速度场 压力场
thermal flow
numerical simulation
filling process
free surface
computation efficiency
参考文献10
1 JU D Y,NISHIDA M,HANABUSA T.Simulation of the thermo-mechanical behavior and residual stresses in the spray coating process[J].Journal of Materials Processing Technology,1999,92-93:243-250. 被引量：1
2 HOU H,XU H,CHENG J.The Computer design system of the casting drawing and casting card[J].Journal of North China Institute of Technology,1999,12(4):230-233. 被引量：1
3 HOU H,JU D Y,ZHAO Y H,CHENG J.Numerical simulation for dendrite growth of binary alloy with phase-field method[J].J Mater Sci Technology,2004,20(12):45-48. 被引量：1
4 侯华,赵宇宏,徐宏,褚忠.铸钢件凝固过程三维位移场数值模拟研究[J] .铸造技术,2002,23(3):145-149. 被引量：3
5 TAO W Q.Numerical Heat Transfers Science[M].Xi'an:Xi'an Jiaotong University Press,1988. 被引量：1
6 YOU B K.Temperature Measurement and Instrument:Couple and Thermal Resistance[M].Beijing:The Document Press of Science and Technology,1990. 被引量：1
7 BEN-JACOB E,GOLENFELD N,LANGER J S.Boundary-layer model of pattern formation in solidification[J].Phys Rev A,1984,29:330-340. 被引量：1
8 ZHAO Y H,HOU H,JU D Y.Atomic-scale computer simulation of mixture precipitation mechanism for Ni75AlxV25-x alloy[J].Material Science Forum,2005,(475-479):3115-3118. 被引量：1
9 BEN-JACOB E,GOLENFELD N,KOTLIAR B G.Pattern selection in dendritic solidification[J].Phys Rev Lett,1984,53:2110-2113. 被引量：1
10 ZHAOYuhong,CHENZheng,WANGYongxin,LUYanli.Atomic-scale computer simulation for early precipitation process of Ni_(75) Al_(10) V_(15) alloy[J] .Progress in Natural Science:Materials International,2004,14(3):241-246. 被引量：4
二级参考文献5
1 陈瑶,白雪峰,朱日明,柳百成.铸造过程应力场数值模拟集成化技术的研究[J] .铸造,1997,46(3):1-5. 被引量：39
2 李庆春.铸件形成理论基础[M].北京:机械工业出版社,1988.72-85. 被引量：4
3 徐芝纶.弹性力学[M].北京:高等教育出版社,1994.. 被引量：9
4 林祖森.有限元法基本理论及程序.太原：华北工学院教材[M].,1988.50-54. 被引量：1
5 李晓玲,陈铮,刘兵.有序相临界晶核判据的计算机研究[J] .有色金属,2001,53(3):48-51. 被引量：5
共引文献5
1 侯华,徐宏,赵宇宏.Computer simulation for precipitation process of θ（Ni3V） and γ＇（Ni3Al） with microscopic phase-field method[J] .中国有色金属学会会刊：英文版,2006,16(A02):319-323. 被引量：1
2 侯华,巨东英,毛红奎,D．SAITO.Modeling simulation and experimental validation for mold filling process[J] .中国有色金属学会会刊：英文版,2006,16(A02):335-338. 被引量：2
3 徐宏,侯华,张国伟.Simulation for microstructure evolution of Al-Si alloys in solidification process[J] .中国有色金属学会会刊：英文版,2006,16(B02):591-597.
4 LI Yongsheng CHEN Zheng WANG Yongxin LU Yanli ZHANG Jianjun.Simulation of the coarsening behavior of intermetallic precipitates in Ni_(75)Al_xV_(25-x) alloys[J] .Rare Metals,2007,26(5):498-503. 被引量：1
5 崔钺,张文胜,廉博,王丽元.精轧机工作辊换辊轨道的位移场分析[J] .冶金设备,2016(4):35-37.
同被引文献23
1 李荣德,侯君,于茜,白彦华,李晨曦.大高径比ZA27合金铸件挤压铸造应力场模拟[J] .沈阳工业大学学报,2005,27(1):15-15. 被引量：7
2 李荣德,侯君,于茜,白彦华,李晨曦.大高径比ZA27合金铸件挤压铸造应力场模拟[J] .沈阳工业大学学报,2005,27(2):138-142. 被引量：2
3 朱慧,康进武,黄天佑.基于有限差分网格的发动机缸体铸件热应力模拟[J] .铸造技术,2005,26(7):618-621. 被引量：5
4 侯华,巨东英,毛红奎,D．SAITO.Modeling simulation and experimental validation for mold filling process[J] .中国有色金属学会会刊：英文版,2006,16(A02):335-338. 被引量：2
5 曹广军,陈立亮.基于FDM/FEM联合的铸件凝固过程热应力数值模拟的研究[J] .铸造技术,2007,28(7):987-990. 被引量：9
6 牛晓峰,侯华,徐宏,毛红奎.基于OpenGL的STL文件剖分及填充显示技术研究[J] .铸造设备研究,2008(1):22-25. 被引量：2
7 韩志强,朱维,柳百成.挤压铸造凝固过程热-力耦合模拟 Ⅰ.数学模型及求解方法[J] .金属学报,2009,45(3):356-362. 被引量：21
8 朱维,韩志强,柳百成.挤压铸造凝固过程热-力耦合模拟 Ⅱ.模拟计算及实验验证[J] .金属学报,2009,45(3):363-368. 被引量：19
9 李峰,林俊峰,初冠南.铝合金锻件成形工艺及三维有限元分析[J] .中国有色金属学报,2009,19(7):1197-1202. 被引量：11
10 Song Nannan,Luan Yikun,Bai Yunlong,Kang Xiuhong,Xia Lijun,Li Dianzhong.Computer simulation of core filling process of cast high speed steel roll[J] .China Foundry,2009,6(4):314-318. 被引量：4
引证文献7
1 ZHANG Pu,YAO Zhenqiang,DU Zhengchun.Impedance Analysis of Forging Process and Strategy Study on Compliance for Forging Manipulator[J] .Chinese Journal of Mechanical Engineering,2013,26(4):651-658. 被引量：2
2 牛晓峰,梁伟,赵宇辉,侯华.基于FDM/FEM的挤压铸造收缩缺陷数值模拟[J] .热加工工艺,2011,40(15):40-43. 被引量：1
3 牛晓峰,梁伟,赵宇宏,侯华,穆彦青,黄志伟,杨伟明.New algorithm for solving 3D incompressible viscous equations based on projection method[J] .Transactions of Nonferrous Metals Society of China,2011,21(8):1826-1832.
4 赵宇宏,牛晓峰,侯华.基于FDM/FEM的镁合金挤压铸造温度场数值模拟[J] .兵器材料科学与工程,2011,34(5):1-4. 被引量：6
5 杨伟明,赵宇宏,侯华,牛晓峰.一种新的基于FDM/FEM挤压铸造温度场计算模型[J] .兵器材料科学与工程,2013,36(1):25-28. 被引量：2
6 杨伟明,赵宇宏,侯华,牛晓峰.一种新的基于FDM/FEM挤压铸造温度场计算模型[J] .铸造,2013,62(3):222-225.
7 牛晓峰,方钊,梁伟,侯华,王红霞.New numerical algorithm of gas-liquid two-phase flow considering characteristics of liquid metal during mold filling[J] .Transactions of Nonferrous Metals Society of China,2014,24(3):790-797.
二级引证文献10
1 牛晓峰,穆彦青,梁伟,侯华,赵宇宏.基于投影法的挤压铸造充型过程数值模拟[J] .特种铸造及有色合金,2014,34(1):57-59. 被引量：3
2 焦殿辉,姚远,邓冬,李茂林,赵爱民.高碳钢感应加热的微观组织研究[J] .热加工工艺,2014,43(3):55-58.
3 牛晓峰,王冠乾,梁伟,侯华.基于近似因子分解法的铸造充型过程数值模拟研究[J] .中国机械工程,2014,25(4):546-549. 被引量：2
4 汤杰,王非凡,韩志强,孙珏,许善新.汽车副车架挤压铸造凝固过程热-力耦合模拟[J] .特种铸造及有色合金,2015,35(1):52-56. 被引量：3
5 LEI Jie,LU Xinjiang,LI Yibo,HUANG Minghui,ZOU Wei.Approximate-model Based Estimation Method for Dynamic Response of Forging Processes[J] .Chinese Journal of Mechanical Engineering,2015,28(3):565-572. 被引量：2
6 罗岑弘,赵武.7001高强铝合金挤压铸造过程的数值模拟分析[J] .热加工工艺,2018,47(9):111-115. 被引量：2
7 翟富刚,李瑞阳,袁龙,沙迪,孔祥东.双锻造操作机大车行走系统控制方法探析[J] .液压与气动,2019,43(11):1-8. 被引量：6
8 宋春丽,裴小龙,陈利文,陈磊,赵宇宏.大型薄壁复杂铝合金舱体件低压铸造模拟对比分析[J] .特种铸造及有色合金,2023,43(6):794-799. 被引量：4
9 卫朝霞,徐艳.FDM连续挤压成型过程中温度场的有限元分析[J] .计算机应用与软件,2024,41(7):61-66.
10 葛涛涛,赵展,牛晓峰,王天成,刘朝炫.基于SPH-FEM耦合方法的挤压铸造数值模拟[J] .特种铸造及有色合金,2024,44(7):909-916.
1 胡小东,巨东英,赵红阳.Thermal Flow Simulation of Twin-Roll Casting Magnesium Alloy[J] .Journal of Shanghai Jiaotong university(Science),2012,17(4):479-483. 被引量：1
2 Song Nannan,Luan Yikun,Bai Yunlong,Kang Xiuhong,Xia Lijun,Li Dianzhong.Computer simulation of core filling process of cast high speed steel roll[J] .China Foundry,2009,6(4):314-318. 被引量：4
3 GUI Gang, NIE Yi-yong (Shenyang Institute of Automation, Academia Sinica,School of Graduate, Academia Sinica, Shenyang 110016, China ).Study of Nozzle and Vent Locations on Die Casting Filling Process[J] .厦门大学学报（自然科学版）,2002,41(S1):29-30.
4 盛文斌,李东,杨锐,刘羽寅,郭景杰,贾均.Analysis of filling process of Ti6Al4V alloy melt poured in permanent mold during centrifugal casting process[J] .中国有色金属学会会刊：英文版,2001,11(3):353-357. 被引量：2
5 YanqingSU,TiejunZHANG,JingjieGUO,HongshengDING,WeishengBI,JunJIA,HengzhiFU.Physical Simulation of Mold-Filling Processing of Thin-Walled Castings under Traveling Magnetic Field[J] .Journal of Materials Science & Technology,2004,20(1):27-30. 被引量：7
6 Zhoushun ZHENG Xuanhui QU Yunping LI Jianfeng GUO.Numerical Simulation of Powder Injection Molding Filling Process Based on ANSYS[J] .Journal of Materials Science & Technology,2003,19(z1):144-146.
7 Lei Jin,Peizhong Li,Haibin Zhou,Wei Zhang,Guodong Zhou,Chun Wang.Improving thermal insulation of TC4 using YSZ-based coating and SiO_2 aerogel[J] .Progress in Natural Science:Materials International,2015,25(2):141-146. 被引量：8
8 耿铁,李德群,周华民.Numerical simulation of the filling stage in injection molding based on a 3D model[J] .Journal of Harbin Institute of Technology(New Series),2005,12(2):129-133. 被引量：3
9 Chang-jiang Ni,Gao-chun Lu,Qing-dong Zhang,Tao Jing,Jun-jiao Wu,Lin-long Yang,Qin-fang Wu.Influence of core box vents distribution on flow dynamics of core shooting process based on experiment and numerical simulation[J] .China Foundry,2016,13(1):22-29. 被引量：4
