期刊文献+

AM60镁合金的高温热压缩流变应力行为的研究 被引量:3

Flow Stress Behavior of AM60 Magnesium Alloy during Hot Compression Deformation at Elevated Temperatures
下载PDF
导出
摘要 在Gleeble-1500热模拟机上对AM60镁合金在应变速率为0.0005—0.5s^-1、变形温度为250~450℃条件下的流变应力行为进行了研究。结果表明:AM60镁合金热压缩变形的流变应力受到变形温度和应变速率的强烈影响,可以用Zener-Hollmon。参数的双曲正弦函数形式进行描述。在本实验条件下,AM60镁合金热压缩变形时的应力指数n为7.2,其热变形激活能Q为190kJ/mol. Hot compression tests of AM60 magnesium alloy were performed on Gleeble - 1500 at strain rates ranging from 0. 0005 s^-1 to 0.5 s^-1 and deformation temperature ranging from 250 ℃ to 450 ℃. The results show that the flow stress behaviors strongly depend on the deformation temperature and strain rate, which can be demonstrated by a Zenerhollomon parameter in the hyperbolic-sine-type equation during hot compression deformation. In the present study, the hot deformation activation energy is 190 kJ/mol and the stress exponent is 7.2 during the hot compression deformation of AM60 magnesium alloy.
出处 《矿冶工程》 CAS CSCD 北大核心 2006年第6期92-94,共3页 Mining and Metallurgical Engineering
关键词 AM60镁合金 热压缩变形 流变应力 热变形激活能 AM60 magnesium alloy hot compression deformation flow stress deformation activation energy
  • 相关文献

参考文献7

  • 1Mordike B L,Ebert T.Magnesium properties-applications-potential[J].Mater Sci Eng,2001,A302(1):37-45. 被引量:1
  • 2Friedrich H,Schumann S.Research for a "new age of magnesium" in the automotive industry[J].J Mater Processing Technol,2001,117(3):276-281. 被引量:1
  • 3郭强,张辉,陈振华,严红革,夏伟军,傅定发.AZ31镁合金的高温热压缩流变应力行为的研究[J].湘潭大学自然科学学报,2004,26(3):108-111. 被引量:20
  • 4Yang X,Miura H,Sakai T.Dynamic nucleation of new grains in magnesium alloy during hot deformation[J].Materials Science Forum,2003,419-422(1):515-520. 被引量:1
  • 5Tan J C,Tan M J.Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet[J].Mater Sci Eng,2003,A339 (1-2):124-132. 被引量:1
  • 6Yang X,Miura H,Sakai T.Dynamic evolution of new grains in magnesium alloy AZ31 during hot deformation[J].Materials Transactions,2003,44 (1):197-203. 被引量:1
  • 7Perez-Prado M T,Del Valle J A,Contreras J M,et al.Microstructural evolution during large strain hot rolling of an AM60 Mg alloy[J].Scripta Materialia,2004,50(5):661-665. 被引量:1

二级参考文献15

  • 1Rroes F H.The Science,Technology and Applications of Magnesium[J].JOM, 1998,9:30. 被引量:1
  • 2Clow B B.Magnesium Industry Overview[J].Advanced Mater Proc,1996,10:33-36. 被引量:1
  • 3Mordike B L,Ebert T.Magnesium properties-applications-potential[J].Mater Sci Eng 2001,A302:37-45. 被引量:1
  • 4Polmear I J. Magnesium alloys and applications[J]. Mater Sci Technol,1994,10:1-16. 被引量:1
  • 5Friedrich H,Schumann S.Research for a ''new age of magnesium'' in the automotive industry[J]. J Mater Processing Technol, 2001,117:276. 被引量:1
  • 6Aghion E,Bronfin B, Eliezer D.The role of the magnesium industry in protecting the environment[J]. J Mater Processing Technol,2001,117:381. 被引量:3
  • 7Takuda H,Fujimoto H,Hatta N.Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures[J].J Mater Processing Technol,1998,80-81:513-516. 被引量:1
  • 8Galiyev A,Kaibyshev R,Gottstein G. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60[J]. Acta Mater,2001,49:1 199-1 207. 被引量:1
  • 9Galiyev A,Kaibyshev R, Sakai T.Continuous dynamic recrystallization in magnesium alloy[J].Materials Science Forum,2003,419-422:509-514. 被引量:1
  • 10Barnett M R.Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ31[J].Journal of Light Metals, 2001(1):167-177. 被引量:1

共引文献19

同被引文献32

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部