摘要
传统五步算法具有很好的准确度,但必须满足测量中无法实现的等步长相移条件,这在实际测量中无法使用。为此在双光束干涉原理的基础上,提出了一种改进型的五步算法,实现了在10 nm范围内任意步长的算法高准确度。通过数值模拟,结果表明:对于1 nm的步长测量误差、0.1%的信号测量误差,改进型五步算法的算法准确度优于0.001个相位周期,而且不需要等步长相移控制。改进型五步算法不仅技术上更易于实现,其结果也更加可靠,对于指导精密测长的实验和研究工作具有十分重要的意义。
Although the traditional five-bucket phase-shifting algorithm possesses excellent accuracy, it isn＇t used in the practical length measurement because of the strict conditions of equal step length of phase shifting. Based on twobeam interference principle, a corrected five-bucket phase-shifting algorithm which possesses high accuracy with an arbitrary phase step in range of 10 nm is present. With the numerical simulation, it shows that the accuracy of the corrected algorithm is better than 0. 001 phase period when the measuring error of the phase step is 1 nm and the measuring error of the signal is 0. 1%, besides that, this algorithm does not need accurate equal step length of phase shifting. With higher reliability and higher accuracy, the corrected five-bucket phase-shifting algorithm is very valuable for the precision length measurement.
出处
《光学学报》
EI
CAS
CSCD
北大核心
2006年第11期1687-1690,共4页
Acta Optica Sinica
基金
科学技术部项目(2002DEA20014)资助课题
关键词
光学测量
相移算法
五步算法
精密测长
相位误差
optical measurement
phase-shifting algorithm
five-bucket phase-shifting algorithm
precision length measurement
phase error
