摘要
运用制造业信息化单元技术,构建了大型矿井提升设备的虚拟设计平台。基于虚拟设计制造平台完成了网络系统支持下的产品三维数字化设计、计算机辅助分析、计算机辅助工艺设计;建立了矿井提升设备设计制造信息化标准体系,实现了产品设计制造全过程信息分类代码的规范和统一;开发了JKM-4.5×6多绳摩擦式提升机并成功投入使用。研究结果可为大型设备的研发提供借鉴。
The virtual design platform for large mine elevators was established by using the informationization unit technology of manufacturing industry. On the basis of the virtual design and manufacture platform, 3D digital design, computer-aided analysis and computer-aided process planning under the support of network system were carried out. The informationization standard system for the design and manufacturing of mine elevator equipment was established. The information classification code of the whole procedure of product design and manufacturing was normalized and unified. A type of multirope friction mine elevator, named by JKM-4.5 × 6, has been developed and put into practice. This study results may be helpful for the development of large-sized equipment.
出处
《中国机械工程》
EI
CAS
CSCD
北大核心
2006年第15期1563-1567,共5页
China Mechanical Engineering
基金
国家863高技术研究发展计划资助项目(2004AA411040)
河南省杰出人才创新基金资助项目(0621000800)
关键词
虚拟制造
三维数字化设计
有限元分析
提升设备
标准化
virtual manufacturing
3D digital design
finite element analysis
elevator equipment
standardization
