期刊文献+

Nuclear Minerals Plants in Brazil—Case Studies

Nuclear Minerals Plants in Brazil—Case Studies
原文传递
导出
摘要 This paper presents the process flow sheet of the main nuclear industrial units in Brazil and discusses some solvent extraction technical support required for these plants. The Center for the Development of Nuclear Technology-CDTN has been investigating alternative ways to supply the nuclear industry in order to improve the industrial processes, Some case study examples are presented, Emulsion from Uranium Solvent Extraction Plant and Itataia Uranium Developments. In Caitité industrial plant the water recirculation has caused continuous changes in the composition of pregnant liquor mainly in the sulfate and chloride concentrations. After some water recirculation cycles, a decrease in the uranium extraction efficiency was noted which was followed by the formation of stable emulsion at the uranium extraction stage. Itataia Uranium Developments were performed in a pilot plant for Itataia ore. This ore has the uranium mineral associated to the phosphate. The process consists of four main steps: 1) phosphate concentration, 2) chemical digestion of the concentrate to produce phosphoric acid with dissolved uranium, 3) uranium recovery, and 4) phosphoric acid purification by solvent extraction. This paper presents the process flow sheet of the main nuclear industrial units in Brazil and discusses some solvent extraction technical support required for these plants. The Center for the Development of Nuclear Technology-CDTN has been investigating alternative ways to supply the nuclear industry in order to improve the industrial processes, Some case study examples are presented, Emulsion from Uranium Solvent Extraction Plant and Itataia Uranium Developments. In Caitité industrial plant the water recirculation has caused continuous changes in the composition of pregnant liquor mainly in the sulfate and chloride concentrations. After some water recirculation cycles, a decrease in the uranium extraction efficiency was noted which was followed by the formation of stable emulsion at the uranium extraction stage. Itataia Uranium Developments were performed in a pilot plant for Itataia ore. This ore has the uranium mineral associated to the phosphate. The process consists of four main steps: 1) phosphate concentration, 2) chemical digestion of the concentrate to produce phosphoric acid with dissolved uranium, 3) uranium recovery, and 4) phosphoric acid purification by solvent extraction.
出处 《Tsinghua Science and Technology》 SCIE EI CAS 2006年第2期217-221,共5页 清华大学学报(自然科学版(英文版)
关键词 uranium recovery process solvent extraction nuclear plants uranium recovery process solvent extraction nuclear plants
  • 相关文献

参考文献4

  • 1Morais C A,Ciminelli V S T.Europium recovery by pho- tochemical reduction from Eu and Eu-Gd chloride solu- tions[].Separation Science and Technology.2002 被引量:1
  • 2Morais C A,Ciminelli V S T.Process development for the recovery of high-grade lanthanum by solvent extraction[].Hydrometallurgy.2004 被引量:1
  • 3Morais C A,Ciminelli V S T.Recovery of europium by chemical reduction of a commercial solution of europium and gadolinium chlorides[].Hydrometallurgy.2001 被引量:1
  • 4Benedetto J S,Morais C A.Phosphoric acid extraction from an uranium phosphorous liquor.In: Proc. 5th Interna- tional Symposium Honoring Professor Ian M. Ritchie, Vancouver[].Hydrometallurgy.2003 被引量:1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部