Effects of Deformation on Bainite Transformation During Continuous Cooling of Low Carbon Steels 被引量：6

Effects of Deformation on Bainite Transformation During Continuous Cooling of Low Carbon Steels

下载PDF

导出

摘要 Hot deformation experiments were carried out on Gleeble 1500 thermo-mechanical simulator. The bainite transformation after deformation was investigated by optical microstructure analysis. The results indicated that the deformation accelerated the bainite transformation when the deformation was carried out at high temperature and no or little ferrite was precipitated before bainite transformation; when the deformation was carried out at low temperature, the deformation hindered the bainite transformation because a lot of ferrite precipitated before bainite transformation. Hot deformation experiments were carried out on Gleeble 1500 thermo-mechanical simulator. The bainite transformation after deformation was investigated by optical microstructure analysis. The results indicated that the deformation accelerated the bainite transformation when the deformation was carried out at high temperature and no or little ferrite was precipitated before bainite transformation; when the deformation was carried out at low temperature, the deformation hindered the bainite transformation because a lot of ferrite precipitated before bainite transformation.

作者 DU Lin-xiu YI Hai-long DING Hua LIU Xiang-hua WANG Guo-dong

机构地区 State Key Laboratory of Rolling and Automation

出处《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2006年第2期37-39,共3页

基金 ItemSponsoredbyHighTechnologyDevelopmentProgramofChina(2001AA332020) NationalNaturalScienceFoundationofChina(50527402)

关键词 DEFORMATION BAINITE continuous cooling low carbon steel deformation bainite continuous cooling low carbon steel

分类号 TG142.31 [一般工业技术—材料科学与工程] TG151.2 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献6

1Shipway P H,Bhadeshia H K D H.Mechanical Stabilization of Bainite[].Materials Science and Technology.1995 被引量：1
2Swallow E,Bhadeshia H K D H.High Resolution Observation of Displacements Caused by Bainitic Transformation[].Materials Science and Technology.1996 被引量：1
3Kurdomov G V,Utevsky L M,Entin RI.Transformations in Iron and Steel[]..1977 被引量：1
4Hodgson P D,Hickson M R,Gibbs R K.Ultrafine Ferrite in Low Carbon Steel[].Scripta Materialia.1999 被引量：1
5DU Lin-xiu,ZHANG Cai-bei,DI NG Hua.Determination of Upper Li mit Temperature of Strain-Induced Transformation of Low Carbon Steels[].Iron and Steel Institute of Japan.2002 被引量：1
6Khlestov V M,Konopleva E V,Mcqueen HJ.Kinetics of Austenite Transformation During Thermomechanical Processes[].Canadian Metallurgical Quarterly.1998 被引量：1

同被引文献29

1丁晓军.国内石油天然气输送用X80钢级焊管的开发[J].焊管,2005,28(2):29-35. 被引量：3
2王晓香.X80级管线钢管及感应加热弯管的研制和试验[J].焊管,2005,28(2):36-42. 被引量：6
3曾艺成,李克锐,张忠仇.我国等温淬火球铁(ADI)生产应用及发展前景[J].现代铸铁,2007,27(1):13-19. 被引量：17
4赵河山,李殿中,刘朝霞,李依依.低碳钢形变诱导铁素体相中碳原子的扩散与稳定性研究[J].金属学报,2007,43(3):286-290. 被引量：7
5张占平,齐育红,王晓俊,DELAGNES Denis,BERNHART Gerard.55NiCrMoV7钢回火组织特征与回火温度和时间的关系[J].材料热处理学报,2007,28(2):73-76. 被引量：9
6曹金荣,刘正东,程世长,杨钢,谢建新.应变速率和变形温度对T122耐热钢流变应力和临界动态再结晶行为的影响[J].金属学报,2007,43(1):35-40. 被引量：47
7布赖恩F,皮克林.钢的组织与性能[M]//材料科学与技术丛书:第7卷.刘嘉禾等译.北京:科学出版社.1999:165-192,316-362. 被引量：1
8Anelli E, Cumino G, Gonalez C. Metallurgical design of accelerated-cooling process for seamless pipe production[C]. Proceedings from Materials Solutions 97 on Accelerated Cooling/direct Quenching Steels. Indiana, 1997: 33. 被引量：1
9Pussegoda N, Yue S, Jonas J J. Laboratory simulation of seamless tube piercing and rolling using dynamic recrystallization schedules[J]. Metallurgical TransactionsA, 1990, 21A(1): 153-164. 被引量：1
10Olson G B, Cohen M. General mechanism ofmartensitic nucleation. Part II. FCC to BCC and other martensitic transformations[J]. Metallurgical Transactions A, 1976, 7(12): 1905-1914. 被引量：1

引证文献6

1陈家能,陈华江.略论奥贝球铁及其应用[J].铸造技术,2008,29(3):420-423. 被引量：2
2殷光虹.25MnV钢贝氏体转变行为研究[J].钢管,2010,39(2):23-28. 被引量：1
3Jiang Haitao,Qiao Mingliang,Huang Yixin,Yin Yuqun.Microstructure and Mechanical Properties of X80 HTP Pipeline Steel Produced by Steckel Mill[J].Engineering Sciences,2008,6(1):78-82. 被引量：2
4徐光,操龙飞,补丛华,邹航.超级贝氏体钢的现状和进展[J].特殊钢,2012,33(1):18-21. 被引量：21
5闵永安,赵洁璠,林建平,闵峻英.22MnB5钢热变形诱发相变及其对组织性能的影响[J].同济大学学报（自然科学版）,2016,44(1):113-118. 被引量：2
6黄慧强,邸洪双,龚殿尧.高铝TRIP钢的连续冷却转变及热变形对其相变的影响[J].金属热处理,2020,45(6):84-88.

二级引证文献28

1张莉莉,张骁勇,高惠临,王锋.一种高铌X80管线钢的组织性能分析[J].材料工程,2009,37(5):1-5. 被引量：7
2王锦程,李伟明,张忠明,徐春杰.等温淬火对连铸球铁型材组织和硬度的影响[J].材料热处理学报,2013,34(1):70-75. 被引量：10
3戴鸿滨,熊志亮,范成磊,林三宝.高强贝氏体钢TIG焊组织与性能研究[J].焊接,2013(3):22-24. 被引量：1
4艾地,刘耀东,刘晓春,刘云旭.ZG75Si2Mn1CrB钢的等温淬火工艺[J].金属热处理,2013,38(4):57-59. 被引量：2
5王志奋,吴立新,刘敏,王俊霖.贝氏体钢的耐腐蚀性能研究[J].武汉工程职业技术学院学报,2013,25(2):15-18. 被引量：1
6黄建斌,宋智丽,陈增谋,王小宁.影响铸造Si-Mn-Mo贝氏体钢冲击性能的主要因素[J].金属热处理,2013,38(8):87-92. 被引量：1
7孙宏,田鹏,李建一,王庆国.低成本高韧性X70钢级板卷及螺旋埋弧焊管的研制[J].压力容器,2013,30(10):72-80. 被引量：1
8胡海江,徐光,张玉龙,刘峰.先进贝氏体钢奥氏体晶粒长大行为的动态观察[J].材料热处理学报,2014,35(1):83-87. 被引量：20
9李大赵,崔天燮,王育田,付培茂,曹永禄,孟传峰.低碳低合金高强贝氏体钢的研究现状及进展[J].钢铁研究学报,2013,25(11):1-5. 被引量：10
10刘澄,赵斌,赵振波,刘云旭.碳在超级贝氏体钢中的作用[J].金属热处理,2015,40(2):1-7. 被引量：6

1YI Hai-long DU Lin-xiu WANG Guo-dong LIU Xiang-hua.Bainite Transformation Under Continuous Cooling of Nb-Microalloyed Low Carbon Steel[J].Journal of Iron and Steel Research International,2006,13(3):36-39. 被引量：10
2Zhi-hong ZHANG,Xiang-xin XUE.Bainite Transformation of Low-carbon and Boron-containing Steel under Continuous Cooling[J].Journal of Iron and Steel Research International,2014,21(3):359-363. 被引量：3
3Ke-Fu Yao, Chuncheng Liu, Wei Shi and Zhuang Liu Department of Mechanical Engineering Tsinghua University, Beijing 100084, P.R. China.The influence of stress and strain on kinetics of bainite transformation[J].Journal of Shanghai Jiaotong university(Science),2000,5(1):225-229. 被引量：1
4Yang, ZG,Fang, HS,Wang, JJ,Zheng, YK,Li, CM.STM Study on the Surface Relief and Mechanism of Bainite Transformation[J].Journal of Materials Science & Technology,1996,12(4):249-254. 被引量：1
5Y.T. Zhang, D.Z. Li and Y.Y. LiInstitute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016, China Manuscript received 26 December 2001,in revised form 9 February 2002.MODELING OF FERRITE GRAIN GROWTH OF LOW CARBON STEELS DURING HOT ROLLING[J].Acta Metallurgica Sinica(English Letters),2002,15(3):267-271. 被引量：4
6CAI Ming-hui,DING Hua,ZHANG Jian-su,LI Long,LI Xiao-bin,DU Lin-xiu.Transformation Behavior of Low Carbon Steels Containing Two Different Si Contents[J].Journal of Iron and Steel Research International,2009,16(2):55-60. 被引量：3
7Qu Jinbo, Wang Zhaodong, Liu Xianghua, Wang Guodong.Grain Size Prediction after Continuous Cooling Transformation from Deformed Austenite to Ferrite[J].Journal of Iron and Steel Research International,1998,5(2):42-44.
8LI Bing ZHENG Lei.Effect of Mo on the continuous cooling transformation behavior of Nb-Ti micro-alloyed low carbon steel[J].Baosteel Technical Research,2011,5(3):46-50.
9R.L. Zuo,L. Fang and P. D. Ding(Department of Metallurgy and Materials Engineering, Chongqing University, Chongqing 630044, China).CARBIDE PRECIPITATION AND BAINITE TRANSFORMATION IN Fe-C-Si ALLOY[J].Acta Metallurgica Sinica(English Letters),1996,9(5):373-378.
10Xiangwei Kong,Chunlin Qiu.Continuous Cooling Bainite Transformation Characteristics of a Low Carbon Microalloyed Steel under the Simulated Welding Thermal Cycle Process[J].Journal of Materials Science & Technology,2013,29(5):446-450. 被引量：3

Journal of Iron and Steel Research International

2006年第2期

浏览历史

内容加载中请稍等...

Effects of Deformation on Bainite Transformation During Continuous Cooling of Low Carbon Steels 被引量：6

参考文献6

同被引文献29

引证文献6

二级引证文献28

相关作者

相关机构

相关主题

浏览历史