Numerical Simulation of Fluid Flow and Heat Transfer in Funnel Shaped Mold of Thin Slab Continuous Caster 被引量：2

Numerical Simulation of Fluid Flow and Heat Transfer in Funnel Shaped Mold of Thin Slab Continuous Caster

下载PDF

导出

摘要 Thin slab casting is used widely in the world. The control of molten steel flow and solidification in the mold is difficult due to the high casting speed and complicated configuration of the mold. Numerical simulation was carried out to study the fluid flow and heat transfer in the funnel shaped mold. The influence of nozzle design, casting speed and nozzle submersion depth on the flow and temperature fields in the mold was investigated, and guidance for selecting configurations of submerged nozzle was obtained. Thin slab casting is used widely in the world. The control of molten steel flow and solidification in the mold is difficult due to the high casting speed and complicated configuration of the mold. Numerical simulation was carried out to study the fluid flow and heat transfer in the funnel shaped mold. The influence of nozzle design, casting speed and nozzle submersion depth on the flow and temperature fields in the mold was investigated, and guidance for selecting configurations of submerged nozzle was obtained.

作者 ZHU Miao-yong WANG Jun ZHANG Ying

机构地区 Northeastern University

出处《Journal of Iron and Steel Research International》 SCIE CAS CSCD 2005年第6期14-19,共6页

基金 ItemSponsoredbyNationalNaturalScienceFoundationofChinaandBaoshanIronandSteelCo(59504006,50274022)

关键词 thin slab continuous casting fluid flow heat transfer numerical simulation thin slab continuous casting fluid flow heat transfer numerical simulation

分类号 TF775 [冶金工程—钢铁冶金]

引文网络
相关文献

参考文献8

1BAOYan ping,ZHUJian qiang,JIAWei,etal.Three Di mensionalMathematicalModelStudyonFluidFlowinThin SlabContinuousCasterMold[].JournalofUniversityofSci enceandTechnologyBeijing.2000 被引量：1
2WANGLei hua.FluidFlowandHeatTransferinThinSlab ContinuousCastingMould[]..1990 被引量：1
3YANGBing jian,SUJun yi.NumericalSimulationofThree DimensionalMoltenFlowinThinSlabContinuousCasting Mold[].ChineseJournalofAppliedMechanics.2000 被引量：1
4BAOYan ping,ZHUSan sheng,TIANNai yuan,etal.WaterModelStudyofThinSlabCastingMold[].SpecialSteel.1998 被引量：1
5ThomasGO,JonathanAD.ModelingtheThinSlabContinu ousCastingMould[].MetallTransB.1994 被引量：1
6WENGuang hua,HEJun fan,LIGang.FluidFlowinThin SlabCastingMould[].Steelmaking.1995 被引量：1
7NamH,ParkHS,YoonJK.NumericalAnalysisofFluid FlowandHeatTransferinFunnelTypeMoldofaThinSlab Caster[].ISIJ International.2000 被引量：1
8LaunderBE,SpaldingDB.MathematicalModelsofTurbu lence[]..1972 被引量：1

同被引文献6

1张雷,康进武,沈厚发,黄天佑.Finite Point Method for the Simulation of Solidification and Heat Transfer in Continuous Casting Mold[J].Tsinghua Science and Technology,2004,9(5):570-573. 被引量：1
2王迎春,朱立光,李大永,彭颖红.连铸凝固传热全过程数值模拟与控制[J].特种铸造及有色合金,2005,25(9):531-533. 被引量：8
3YU Hao,KANG Yong-lin,ZHAO Zheng-zhi,SUN Hao.Morphology and Precipitation Kinetics of MnS in Low-Carbon Steel During Thin Slab Continuous Casting Process[J].Journal of Iron and Steel Research International,2006,13(5):30-36. 被引量：11
4邱东明.300 吨连铸钢包下渣检测系统的研制[J].仪器仪表学报,1998,19(1):22-28. 被引量：8
5薛建国,金学伟,姚耕耘.三维MiLE算法模型模拟连铸结晶器内的板坯凝固过程[J].航空材料学报,2010,30(3):10-13. 被引量：4
6常运合,张家泉,钱宏智,韩占光,曾智.基于有限元法异型坯动态二冷控制模型开发与应用[J].北京科技大学学报,2011,33(4):418-422. 被引量：6

引证文献2

1TAN Da-peng,LI Pei-yu,PAN Xiao-hong.Application of Improved HMM Algorithm in Slag Detection System[J].Journal of Iron and Steel Research International,2009,16(1):1-6. 被引量：6
2唐娜娜,李宏祥,张济山,庄林忠.小方坯连铸过程温度场和流场的实时模拟[J].北京科技大学学报,2014,36(12):1634-1642.

二级引证文献6

1TAN DaPeng1,2,JI ShiMing1,LI PeiYu2 & PAN XiaoHong2 1 Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology,Ministry of Education,Zhejiang University of Technology,Hangzhou 310014,China,2 Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China.Development of vibration style ladle slag detection methods and the key technologies[J].Science China(Technological Sciences),2010,53(9):2378-2387. 被引量：7
2赵飞,王华伟,周唯杰.基于隐马尔可夫的航空发动机视情维修研究[J].航空计算技术,2010,40(5):15-19. 被引量：3
3乔晓艳,吴晋芝,耿晓勇,董有尔.细胞膜离子单通道电流重构的计算机仿真[J].计算机工程与应用,2011,47(16):218-220. 被引量：2
4Jun LI,Shiming JI,Dapeng TAN.Improved Soft Abrasive Flow Finishing Method Based on Turbulent Kinetic Energy Enhancing[J].Chinese Journal of Mechanical Engineering,2017,30(2):301-309. 被引量：9
5Meipeng ZHONG,Shuiying ZHENG.Resistance Torque Based Variable Duty-Cycle Control Method for a Stage Ⅱ Compressor[J].Chinese Journal of Mechanical Engineering,2017,30(4):876-887.
6Yangyu Wang,Yongle Zhang,Dapeng Tan,Yongchao Zhang.Key Technologies and Development Trends in Advanced Intelligent Sawing Equipments[J].Chinese Journal of Mechanical Engineering,2021,34(3):175-194. 被引量：3

1Submerged Nozzle for Thin Slab Con—casting[J].China's Refractories,2002,11(3):41-41.
2李庆俊.宝钢板坯连铸机压缩浇注模型及二冷水动态模型剖析[J].连铸,2000,25(3):13-17.
3徐志荣,颜慧成,仇圣桃,刘家琪,刘建华,孔庆福,白连臣,陈礼斌.冷轧用SPHC钢硼微合金化工艺实践[J].特殊钢,2006,27(5):53-54. 被引量：2
4Zhi Jianjun Yu Zuda Hou Angui Wang Hongbing Hu Huijun Zong Zhenyu.The startup and production of the No.4 slab continuous caster at Baosteel[J].Baosteel Technical Research,2008,2(3):60-64.
5DI Mingjun and WANG Jianxin Steelmaking Plant,Xinjiang Bayi Iron & steel Co.,Ltd.,Baosteel Group, Urumqi 830022,Xinjiang,China.Process optimization of billet continuous caster and practice verification[J].Baosteel Technical Research,2010,4(S1).
6LIU Yang1, WANG Xin-hua2, WANG Wen-jun1, JIANG Zhong-hang1 (1.Shougang Research Institute of Technology Beijing 100043 china ,2.University of Science and Technology Beijing 100083, China).Influencing Factors on Center Segregation in Continuously Cast Pipeline Steel Slabs[J].Journal of Iron and Steel Research International,2011,18(S2):352-357. 被引量：1
7Zhen-guo YANG,Bao WANG,Xiao-feng ZHANG,Ya-tao WANG,Hong-biao DONG,Qing LIU.Effect of Electromagnetic Stirring on Molten Steel Flow and Solidification in Bloom Mold[J].Journal of Iron and Steel Research International,2014,21(12):1095-1103. 被引量：9
8A. Hajari,M. Meratian.Surface turbulence in a physical model of a steel thin slab continuous caster[J].International Journal of Minerals,Metallurgy and Materials,2010,17(6):697-703. 被引量：3
9Guijun Li,Kaijian Zhang,Chuanfi Han,Yong Chen,Guoyan Zhao,Kaike Cai.SMART/ASTC dynamic soft reduction technology and its application on the bloom continuous caster at Pangang[J].Journal of University of Science and Technology Beijing,2006,13(2):121-124. 被引量：6
10M Mohebi Moghadam,S H Seyedein,M Reza Aboutalebi.Fluid Flow and Heat Transfer Modeling of AC Arc in Ferrosilicon Submerged Arc Furnace[J].Journal of Iron and Steel Research International,2010,17(9):14-18. 被引量：6

Journal of Iron and Steel Research International

2005年第6期

浏览历史

内容加载中请稍等...

Numerical Simulation of Fluid Flow and Heat Transfer in Funnel Shaped Mold of Thin Slab Continuous Caster 被引量：2

参考文献8

同被引文献6

引证文献2

二级引证文献6

相关作者

相关机构

相关主题

浏览历史