摘要
采用格子Boltzmann方法模拟可变形膜与周围流体的相互作用.分析了格子Boltzmann方法中的边界处理方法和边界受力的计算方法,并且用此方法计算流场中可变形膜的受力.可将离散化后的膜看作一系列的质点,从而得到膜的动力学方程.将可变形膜在流场中受到的力引入方程中,可以计算膜的变形.求解了几种不同情况下,膜的形状随时间的变化.发现,如果可变形膜非常软或者非常硬,经过足够长的时间后,膜的形状会接近一条直线,即回到初始状态.模拟过程是二阶精度的.
A lattice Boltzmann method is employed to simulate the interaction between the deformable membrane and surrounding fluids. The boundary condition and the force exerting on the membrane are handled based on the lattice Boltzmann method. Interaction between the membrane and surrounding fluids may cause the membrane to vibrate. The membrane is discretized into segments. Each segment is simplified to a mass particle and connected to its neighbors. The Newtonian dynamic simulation is applied to each segment. The dynamic equation of the deformable membrane can be simulated according to the force acting on it. The hy-drodynamic forces acting on the membrane are obtained by the computation of fluid flow stress at the moving boundary using the lattice Boltzmann momentum-exchange method. It can simulate the curved shape with second-order accuracy. The fluid flow and membrane deformable equations are coupled. The membrane as a moving boundary affects the fluid flow, and the deformation of the membrane is the result of the hydrody-namic force acting on it. In this paper, the configurations of membranes at corresponding time under different conditions are computed. In the numerical test, both ends of the membrane are fixed and its initial shape is set to be a straight line, its initial vibrant velocity normal to the membrane surface is given to be varied at different position. The flow is simulated by the lattice Boltzmann method with second-order accuracy, and the deformation of the membrane is computed using the Newtonian dynamic equation. The results show that the configuration of the membrane is closed to its initial straight line in a sufficient long time if the membrane is relatively soft or stiff, and the results agree well with the other published results.
出处
《力学学报》
EI
CSCD
北大核心
2005年第2期164-168,共5页
Chinese Journal of Theoretical and Applied Mechanics
基金
国家重大基础研究前期研究专项(2002CCA01200)吉林大学创新基金吉林省科技发展计划项目(国际合作)(20040703-1)国家自然科学基金(10471054)资助项目
