摘要
对中压真空接触器用触头材料的化学成分进行了研究，通过添加适当元素使触头的抗熔焊性能提高，以致在分断大电流时，不发生熔焊或不产生持续电弧。还着重研究了中压真空接触器用触头材料的除气工艺，有效地降低３Ｃｕ－Ｗ类触头的含气量，使真空灭弧室的真空度在分断试验中，不因触头材料放气而降低性能。通过研究，Ｃｕ－Ｗ类触头的分断能力由目前国内２５００Ａ提高到４０００Ａ以上，材料的平均截流值小于２安培。
The chemical compositions of contact arterials used in medium.voltagevacuum contactors are studied.By addition of suitable elements to increase the anti-sweating ability,the sweating will not take place or the continued arc will not be produced at the big cut-off current.The degassing technologyof contact materials used in medium-voltage vacuum contactors its studied particularly,it enables that the gas content of Cu-W type contactor isdecreased efficiently,and so the vacuum in the arc-deflector will not decreasedue to out-gassing of contact material during the cut-off test.By thesestudies the cat-off ability of Cu-W type contactor increases to 4000A andover from 2500A which is the present level in our country; the average cut-off value of the material is smaller than 2A.
出处
《上海有色金属》
CAS
1994年第3期145-151,共7页
Shanghai Nonferrous Metals
关键词
触头材料
烧结
熔渗
真空接触器
Contact material
Cu-W-WC material
Degweing
Sintering
Sweating
