期刊文献+

磁驱动滑移弧的放电特性研究

Properties of the discharge of a gliding arc driven by the magnetic field
下载PDF
导出
摘要 讨论了被外磁场驱动的滑移弧。磁驱动滑移弧的放电频率随磁感应强度增大而增大,测得的放电频率约在46~517Hz之间;当外加磁感应强度为0.4829T时,用光电倍增管测得滑移弧运动的平均速度为26.4m·s-1;从磁驱动滑移弧的放电电压曲线可以看出,电弧运行在电极平行段时,电压增加缓慢,当电弧运动到电极顶部时,电压上升较快,从1778V迅速增加到约4000V。 A gliding arc driven by the outside magnetic field is discussed. The discharge frequency of the gliding arc increases with the magnetic inductance, and the frequency measured is from 46 to 517 Hz. The mean velocity of the gliding arc measured with a photo-multiplier is about 26.4 m·s^(-1) when the magnetic inductance is 0.4829 T. It can be seen from the voltage curve of arc discharge that the voltage increases slowly when the arc moves on the parallel part of electrodes, and that the voltage increases rapidly from 1778V to 4000V when the arc is on the top of electrodes.
出处 《核聚变与等离子体物理》 CAS CSCD 北大核心 2004年第4期304-306,共3页 Nuclear Fusion and Plasma Physics
关键词 驱动 放电电压 放电特性 电弧运动 电极 磁感应强度 外磁场 上升 曲线 平行 Gliding arc driven by the magnetic field Non-equilibrium plasma Photo-multiplier
  • 相关文献

参考文献6

  • 1Brethes-Dupouey S,Peyrous R,Held B. Removal of H2S in air by using gliding discharges [J]. Eur.Phys.J.AP, 2000, 11:43. 被引量:1
  • 2Krzysztof Krawczyk, Michal Mlotek. Combined plasma-catalytic processing of nitrous oxide [J]. Applied Catalysis B: Environmental, 2001, 30:233. 被引量:1
  • 3Janca J,Czernichowski A. Wool treatment in the gas flow from gliding discharge plasma at atmospheric pressure [J]. Surface and Coatings Technology, 1998, 98:1112. 被引量:1
  • 4Richard F,Cormier J M,Pellerin S,et al. Physical study of a gliding arc discharge [J].J.Appl.Phys., 1996, 79(5):2245. 被引量:1
  • 5Alexander F, Sergei N, Lawrence A K, et el.Gliding arc gas discharge [J]. Progress in Energy and Combustion Science, 1999, 25:211. 被引量:1
  • 6Ozlem Mutaf-Yardimci, Alexei V S, Alexander A F. Thermal and non-thermal regimes of gliding arc discharge in air flow [J]. J.Appl.Phys.,2000, 87(4):1632. 被引量:1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部