摘要
润滑油的压粘系数和固化压力是弹流理论应用于摩擦学工程设计的关键试验数据。本文报道了20种国产润滑油的压粘系数和其中16种润滑油的最小固化压力的测定结果,并对不同油田的基础润滑油、不同化学结构的合成润滑油和不同用途的工业润滑油的压粘系数和固化压力进行了分析比较。
The pressure- viscosity (P- V) coefficient and solidification pressure values of lubrication oils are key testing date for the application of elasto-hydrodynamic theory to tribological design. The P-V coefficients of 20 Chinese lubrication oils were tested using the falling cylinder viscosimeter, and the lowest solidification pressure values of 16 lubrication oils among them were also obtained in this paper. The authors also made an analytical comparison between the different lubrication oils' P-V coefficients and solidification pressure, these oils are: the base lubrication oils produced by three oil fields, the synthetic lubrication oils with different chemical structure and industrial lubrication oils having many uses. The results shown as follows:
a. In order of Chinese lubrication oils' P-V coefficient value is the Shengli oil field's>Kelamayi oil field's > Daqing oil field's; whereas the order of the lowest solidification pressure of them is Kelamayi oil field's>Daqing oil fields's>Shengli oil field's. The P-V coefficients of base lubrication oils with different brand from the same oil field are quite similar, the difference between the lowest solidification pressure is not remarkable.
b. Either diesel engine lubrication oil series or gasoline engine lubrication oil series the P-V coefficient variation is not obvious; The P-V coefficients of gear lubricant and ordinary mechanical lubrication oils are different. In the same series the industrial lubrication oils with different brand have the similar lowest solidification pressure.
c. In order of P-V coefficient value of synthetic or natural lubrication oils with different chemical structure is naphthenic hydrocarbon's > paraffinic hydrocarbon's > castor lubricant's > aromatic hydrocarbon's.
出处
《摩擦学学报》
EI
CAS
CSCD
北大核心
1993年第3期252-257,共6页
Tribology
基金
国家自然科学基金
关键词
润滑油
粘度
压粘系数
固化压力
Chinese lubrication oils, high pressure viscosity, pressure- viscosity coefficient, solidification pressure
