期刊文献+

冷轧带钢轧制压力分布计算 被引量:7

Calculation of rolling pressure distribution in strip cold rolling
下载PDF
导出
摘要 利用经典轧制力模型和轧辊压扁模型 ,考虑二者的耦合推导出考虑轧辊压扁半径的轧制力显示计算公式 ,在此基础上开发了基于影响函数法的冷轧带钢轧制压力分布计算程序 ,并用该程序结合实际生产中的采样数据模拟计算了HC冷轧机各道次的轧制压力分布和总轧制力 ,将所得计算结果与现场实测数据进行比较。结果表明 :所得轧制力计算结果与现场实测数据平均值相近 ,轧制压力分布与实际相符 。 Rolling force formula is deduced using classical rolling force model and roll flattening model, which is used to develop rolling pressure calculation software of strip cold rolling based on influence function method. With the software rolling force and pressure distribution of every pass in HC mill are calculated using sample data from actual rolling. Compared to measured value, the calculation results of rolling force are almost same. Pressure distribution matches the practice condition well, thus introduce an effective calculation method of rolling pressure distribution for shape control of HC mill.
出处 《沈阳航空工业学院学报》 2004年第4期26-28,共3页 Journal of Shenyang Institute of Aeronautical Engineering
关键词 冷轧 带钢 轧制压力分布 影响函数法 轧制力 HC轧机 cold rolling strip rolling pressure distribution influence function method rolling force HC mill
  • 相关文献

参考文献5

  • 1王国栋著..板形控制和板形理论[M].北京:冶金工业出版社,1986:553.
  • 2徐建忠,张凤琴,龚殿尧,刘相华,王国栋,何晓明,巴力颖,黄传清.四辊轧机轧辊弹性变形解析模块的开发[J].轧钢,2003,20(2):8-11. 被引量:38
  • 3J.Chakrabarty. On the Estimation of Roll Force and Torque in Hot and Cold Rolling,.Advanced Technology of Plasticity[J] , 1990(2):607-612 被引量:1
  • 4Guo R. M. Characteristics of Rolling Mills With Roll Shift [J]. Iron and Steel Engineer,1988, 65 (12): 45-54 被引量:1
  • 5Anon. Schedule Free Rolling and Flatness from the HC-mill [J]. Steel Times International,1989, 13(5): 32-33 被引量:1

二级参考文献6

  • 1金兹伯格VB.高精度板带材轧制理论与实践[M].北京:冶金工业出版社,2000.. 被引量:1
  • 2Tsukamoto H, Matsumoto H. Shape and Crown Control Mill-Crossed Rool System [ A ]. AISE Year Book [ C ]. Pittsburgh:AISE, 1984: 467-474. 被引量:1
  • 3Nakamura M, et al. Parr-Crossed Rolling Mill-Mitsuhishi PC Mill [A]. Proceedings of the 4th International steel Rolling Conference [C]. France, June 1-3, 1987. A. 22. 1-A. 22. 8. 被引量:1
  • 4Bald W, et al. Continuously Variable Crown (CVC) Rolling[A]. AISE Year Book [C]. Pittsburgh: AISE, 1987: 127-136. 被引量:1
  • 5Timoshenko, et a1. Theory of Elasticity [M]. New York:McGraw Hill, 1951. 被引量:1
  • 6陈先霖,张杰,张清东,王长松,杨荃,刘本仁,王岭,魏钢城,黄四清,杨金安.宽带钢热连轧机板形控制系统的开发[J].钢铁,2000,35(7):28-33. 被引量:65

共引文献37

同被引文献42

引证文献7

二级引证文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部