Aging precipitation and recrystallization in high-nitrogen austenitic stainless steel 被引量：1

Aging precipitation and recrystallization in high-nitrogen austenitic stainless steel

下载PDF

导出

摘要 The interaction between precipitation and recrystallization in cold deformed Fe-18Cr-12Mn-0.48N high-nitrogen austenitic stainless steel was investigated by means of hardness test, optical microscopy (OM) and transmission electron microscopy (TEM). The results show that the recrystallization of the steel begins at about 750℃ . When aging at 750℃ , the precipitation occurs prior to recrystallization. Large numbers of the second phases nucleate in dislocation, grain boundary and subgrain boundary. Precipitation of the second-phase particles hinders the formation of recrystallization nucleus. The interaction between precipitation and recrystallization in cold deformed Fe-18Cr-12Mn-0.48N high-nitrogen austenitic stainless steel was investigated by means of hardness test, optical microscopy (OM) and transmission electron microscopy (TEM). The results show that the recrystallization of the steel begins at about 750℃ . When aging at 750℃ , the precipitation occurs prior to recrystallization. Large numbers of the second phases nucleate in dislocation, grain boundary and subgrain boundary. Precipitation of the second-phase particles hinders the formation of recrystallization nucleus.

作者石锋王立军崔文芳祁阳刘春明

机构地区 School of Science School of Materials and Metallurgy Key Laboratory for Anisotropy and Texture of Materials

出处《中国有色金属学会会刊：英文版》 CSCD 2009年第S3期569-572,共4页 Transactions of Nonferrous Metals Society of China

基金 Project(2004CB619103) supported by the National Basic Research Program of China Project(50534010) supported by the National Natural Science Foundation of China

关键词 high-nitrogen AUSTENITIC STAINLESS steel aging precipitation RECRYSTALLIZATION high-nitrogen austenitic stainless steel aging precipitation recrystallization

分类号 TG142.71 [一般工业技术—材料科学与工程]

引文网络
相关文献

参考文献3

1张新明,吴文祥,刘胜胆,蹇雄,唐建国.退火过程中AA3003铝合金的析出与再结晶[J].中南大学学报（自然科学版）,2006,37(1):1-5. 被引量：27
2SHI Feng,WANG Lijun,CUI Wenfang,REN Yuping,LI Hongxiao,and LIU Chunming School of Materials & Metallurgy,Northeastern University,Shenyang 110004,China.Precipitates in an isothermally aged Fe-18Cr-12Mn-0.04C-0.48N high-nitrogen austenitic stainless steel[J].Rare Metals,2007,26(S1):185-190. 被引量：1
3刘平,曹兴国,康布熙,黄金亮,顾海澄.快速凝固Cu-Cr-Zr-Mg合金时效析出与再结晶的交互作用及其对性能的影响[J].功能材料,2000,31(2):167-169. 被引量：13

二级参考文献27

1胡庚祥钱苗根.金属学[M].上海:上海科学技术出版社,1980.113. 被引量：24
2Krejci J, Karmazin L . Phase transformations and recrystallization in Ni-33at. %Cr alloy[J]. Materials Sci-ence and Engineering A, 1994, 188(1- 2): 185- 191. 被引量：1
3Torres C E R, Sanchez F H, Gonzalez A, et al. Study of the kinetics of the recrystallization of cold-rolled lowcarbon steel[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,2002, 33(1): 25-31. 被引量：1
4Kashyap K T. Effect of zirconium addition on the recrystallization behaviour of a commercial Al-Cu -Mg alloy[J]. Bulletin of Materials Science, 2001, 24 (6):643 - 648. 被引量：1
5Tsubakino H, Yamamoto A, Kato T, et al. Precipitation in deformed Al-Fe and Al-Fe-Si dilute alloys[J].Materials Science Forum, 2000, 331 : 951 - 956. 被引量：1
6Humphreys F J, Hatherly M. Recrystallization and related annealing phenomena[M]. Oxford: Elsevier Science Ltd, 1995. 被引量：1
7Knut S, Olaf E, Stian T, et al. Texture evolution of an AA3003 alloy after different homogenization treatments[J]. Materials Science Forum, 2002, 396 - 402:463 -468. 被引量：1
8Li Y J, Arnberg L. Solidification structure of DC-Cast AA3003 alloy and its influence on homogenization[J].Aluminium, 2002, 78(10): 834-839. 被引量：1
9Li Y J, Arnberg L. Precipitation of dispersoid in DC-cast 3003 Alloy[J]. Materials Science Forum, 2002,396- 402: 875- 880. 被引量：1
10Burke J. The kinetics of phase transformation in metal[M]. Oxford: Pergamon Press, 1965. 被引量：1

共引文献38

1刘勇,刘平,田保红,李伟.微量RE对接触线用铜合金时效析出特性和软化温度的影响[J].中国稀土学报,2005,23(4):482-485. 被引量：10
2董企铭,苏娟华,刘平,李贺军,康布熙.Cu-Cr-Zr-Mg合金时效析出研究[J].材料热处理学报,2004,25(3):38-41. 被引量：16
3LEIJing-guo,LIUPing,ZHAODong-mei,JINGXiao-tian.Recrystallization Behavior of Re-aged Cu-Ni-Si Alloy[J].材料热处理学报,2004,25(5):88-91. 被引量：1
4刘勇,刘平,李伟,田保红.Cu-Cr-Zr-Y合金时效析出行为研究[J].功能材料,2005,36(3):377-379. 被引量：21
5朱达川,宋明昭,涂铭旌.铜碲合金时效工艺的研究[J].稀有金属材料与工程,2005,34(5):807-810. 被引量：7
6雷静果,刘平,赵冬梅,康布熙,田保红.CuNiSiCr合金时效析出与再结晶的交互作用[J].新技术新工艺,2005(6):53-55. 被引量：7
7刘勇,刘平,董企铭,李伟,田保红.Cu-Cr-Zr-Ce-Y合金时效析出特性和受电磨损行为研究[J].材料热处理学报,2005,26(5):92-96. 被引量：8
8张剑平,陈敬超,艾云龙,陈乐平.CuCr预合金粉压坯时效性能[J].金属热处理,2006,31(10):66-68. 被引量：2
9徐长征,王庆娟,黄美权,张雅妮,郑茂盛,朱杰武,周根树.冷变形Cu-0.36Cr(wt%)合金的抗软化性能和再结晶行为[J].金属热处理,2007,32(5):38-42. 被引量：4
10罗兵辉,单毅敏,柏振海.退火温度对淬火后冷轧5083铝合金组织及腐蚀性能的影响[J].中南大学学报（自然科学版）,2007,38(5):802-808. 被引量：46

同被引文献15

1张君,杨合,何养民,韩炳涛.基于有限元技术的大型6061无缝管挤压温度变化规律研究[J].重型机械,2004(5):40-45. 被引量：1
2李琳琳,张治民,薛勇.AZ31镁合金管材挤压成形数值模拟研究[J].锻压装备与制造技术,2006,41(2):70-72. 被引量：11
3Belyakov A,Miura H,Sakai T.Dynamic recrystallizationunder warm deformation of a 304 type austenitic stainless steel. Journal of Materials Science . 1998 被引量：1
4S.Gxu,Q.X.Cao.Numerical Simulation of the Microstructure in the Ring Rolling of theSteel. Mater. Process. Technol . 1994 被引量：1
5XIAO Ji-mei.Metallography problem of stainless steel. . 2006 被引量：1
6Chinese Mechanical Engineering Society Forging Association.Forging manual. . 2002 被引量：1
7DEHGHAN-MANSHADI A,BARNETT M R,HODGSON P D.Recrystallization in AISI304 austenitic stainless steel during and after hot deformation. Journal of Materials Science . 2008 被引量：1
8ZHAO Xiao-dong.Dynamic recrystallization research of AISI304 austenitic during hot deformation. . 2009 被引量：1
9KIM S I,YOO Y C.Dynamic recrystallization behavior of AISI AISI304 stainless steel. Journal of Materials Science . 2001 被引量：1
10LU Ri-yang.Die structure and process parameters optimization of hot extrusion for austenitic stainless steel pipes based on numerical simulation. . 2009 被引量：1

引证文献1

1郭良刚,董可可,张保军,杨合,郑文达,刘雄伟.AISI304不锈钢管穿孔针挤压动态再结晶规律(英文)[J].中国有色金属学会会刊：英文版,2012,22(S2):519-527. 被引量：2

二级引证文献2

1李春雨,邱春林.304不锈钢热挤压过程中动态再结晶数值模拟研究[J].锻压技术,2024,49(10):56-64.
2鲁世强,欧阳德来,崔霞,王克鲁.Dynamic recrystallization behavior of burn resistant titanium alloy Ti-25V-15Cr-0.2Si[J].Transactions of Nonferrous Metals Society of China,2016,26(4):1003-1010.

1林丹,王磊,孟凡强,崔建忠,乐启炽.Effects of second phases on fracture behavior of Mg-10Gd-3Y-0.6Zr alloy[J].Transactions of Nonferrous Metals Society of China,2010,20(B07):421-425. 被引量：1
2刘平,雷静果,田保红,郅晓,任凤章.Aging precipitation and recrystallization in re-aged copper alloy[J].中国有色金属学会会刊：英文版,2005,15(S3):181-184.
3蹇海根,姜锋,黄宏锋,韦莉莉,蒋龙,郑秀媛.Study on Aging Precipitation Characteristic of High Strength Al-Zn-Mg-Cu Alloy[J].Defence Technology（防务技术）,2010,6(2):104-108. 被引量：1
4Jin-Feng Li,Zhi-Hao Ye,Dan-Yang Liu,Yong-Lai Chen,Xu-Hu Zhang,Xiu-Zhi Xu,Zi-Qiao Zheng.Influence of Pre-deformation on Aging Precipitation Behavior of Three Al–Cu–Li Alloys[J].Acta Metallurgica Sinica(English Letters),2017,30(2):133-145. 被引量：22
5TAN Shu-ping,WANG Zhen-hua,CHENG Shi-chang,LIU Zheng-dong,HAN Jie-cai,FU Wan-tang.Effect of Cu Content on Aging Precipitation Behaviors of Cu-Rich Phase in Fe-Cr-Ni Alloy[J].Journal of Iron and Steel Research International,2010,17(5):63-68. 被引量：10
6Xiao Yude Li Songrui Li Wenxian Zeng Zhihua Ma Zhengqing(Department of Materials Science and Engineering,Central South University of Technology, Changsha 410083, China).SECOND PHASES OF RAPIDLY SOLIDIFIED AlFeCrZrVSi ALLOY AND THEIR THERMAL STABILITIES[J].Journal of Central South University,1998,10(1):24-27. 被引量：4
7刘平,康布熙,曹兴国,黄金亮,顾海澄.Coherent strengthening of aging precipitation in rapidly solidified Cu-Cr alloy[J].中国有色金属学会会刊：英文版,1999,9(4):723-727.
8苏娟华,董企铭,刘平,李贺军,康布熙.Aging Precipitation of Lead Frame Cu-Cr-Sn-Zn Alloy[J].Journal of Rare Earths,2003,21(S1):182-184. 被引量：1
9Siyu Li,Jin Zhang,Jinlong Yang,Yunlai Deng,Xinming Zhang.Influence of Mg Contents on Aging Precipitation Behavior of Al-3.5Cu-xMg Alloy[J].Acta Metallurgica Sinica(English Letters),2014,27(1):107-114. 被引量：6
10Xuemin Wang,Bing Cao,Guifeng Zhou,Chuang Li,Xinlai He.A creep technique for monitoring the aging precipitation in Cu-Nb bainitic steels[J].Journal of University of Science and Technology Beijing,2006,13(1):50-53.

中国有色金属学会会刊：英文版

2009年第S3期

浏览历史

内容加载中请稍等...