期刊文献+

Effect of Inclusions Containing Ti,Mg on Microstructure and Performance of HAZ in Low Carbon Steel 被引量:3

Effect of Inclusions Containing Ti,Mg on Microstructure and Performance of HAZ in Low Carbon Steel
原文传递
导出
摘要 In order to study the effects of inclusions containing titanium,zirconium and magnesium on the impact toughness of heat affected zone (HAZ) of steel,two low carbon steels deoxidized by titanium,zirconium and magnesium were obtained.After some treatments,the inclusion characteristics (size,morphology and chemistry) analysis,Charpy-type test,microstructure and the fracture observation were carried out on the prepared specimens.The following results were found.The inclusions containing Mg can keep more stable in HAZ.The inclusion containing Mg can enhance the impact toughness of HAZ,and the impacting energy reaches 249J at 253K when simulated input energy is 150kJ/mm.The inclusions with diameter smaller than 1.5 μm play a key role of pinning effect. In order to study the effects of inclusions containing titanium,zirconium and magnesium on the impact toughness of heat affected zone (HAZ) of steel,two low carbon steels deoxidized by titanium,zirconium and magnesium were obtained.After some treatments,the inclusion characteristics (size,morphology and chemistry) analysis,Charpy-type test,microstructure and the fracture observation were carried out on the prepared specimens.The following results were found.The inclusions containing Mg can keep more stable in HAZ.The inclusion containing Mg can enhance the impact toughness of HAZ,and the impacting energy reaches 249J at 253K when simulated input energy is 150kJ/mm.The inclusions with diameter smaller than 1.5 μm play a key role of pinning effect.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2011年第S1期164-167,共4页
基金 National Natural Science Foundation of China [No. 50834010] National High Technology Research and Development Program 863 [2009AA03Z530]
关键词 HAZ low carbon steel TITANIUM ZIRCONIUM MAGNESIUM HAZ low carbon steel titanium zirconium magnesium
  • 相关文献

参考文献11

  • 1Wang Qin-bo,Robert Finsy,Xu Hai-bo,Li Xi.On the critical radius in generalized Ostwald ripening[J]. Journal of Zhejiang University Science B . 2005 (8) 被引量:1
  • 2S Kanzawa,A Nakajima,K Okamoto,K Kanaya.Improved Toughness of Weld Fusion Zone by Fine Tin Particles and Development of a Steel for Large Heat Input Welding. Tetsu To Hagane . 1975 被引量:1
  • 3Y Tomita,N Saito,T Tsuzui,Y Tokunaga,K Okamoto.Improvement in HAZ Toughness of Steel by TiN-MnS Addition. Iron and Steel Institute of Japan . 1994 被引量:1
  • 4T. Funakoshi,T. Tanaka,S. Ueda, et al.Improvement in mi- crostructure and toughness of large heat-input weld bond of high strength steel due to addition of rare earth metals and boron. Transactions of the Iron and Steel Institute of Japan . 1977 被引量:1
  • 5Enomoto M.Nucleation of phase transformation at intragranular inclusions in steel. Metallic Materials . 1998 被引量:1
  • 6J H Shim,Y J Oh,ect.Ferrite Nucleation Potency of Non-Metallic Inclusion in Medium Carbon Steels. Acta Materialia . 2001 被引量:1
  • 7Madariaga I,Gutierrez I.Role of the particle matrix interface on the nucleation of acicular ferrite in a medium carbon microalloyed steel. Acta Materialia . 1999 被引量:1
  • 8SHIM Jse-Hyeok,BYUN Jung-Soo.Hot deformation and acicular ferrite microstructure in C-Mn steel containing Ti2O3 inclusions. ISIJ International . 2000 被引量:1
  • 9Shim JH,Oh YJ,Suh JY,et al.2</sub>O<sub>3</sub> particle in low carbon steel&amp;sid=Acta Materialia&amp;aufirst=Shim JH');&#xA; ">Nucleation of intragranular ferrite at Ti<sub>2</sub>O<sub>3</sub> particle in low carbon steel. Acta Materialia . 1999 被引量:1
  • 10LEE Jye-Long,Yeong-Tsuen PAN.The formation of intragranular acicular ferrite in simulated heat-affected zone. ISIJ International . 1995 被引量:1

同被引文献57

引证文献3

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部