期刊文献+

Modeling and Simulation of Iron-Carbon Phase Transformation During Tempering of Steel 被引量:4

Modeling and Simulation of Iron-Carbon Phase Transformation During Tempering of Steel
原文传递
导出
摘要 Tempering is final process used in heat treatment of steel components.It is important to improve the toughness and ductility of the quenched steel without a great loss of the hardness and strength.However,the traditional tempering process is hard to satisfy requirements of combination mechanical properties with low cost.A quantitative model is developed to simulate the micro-structural evolution during tempering process of carbon steel by modifying the previous Ju and Inoue's model.The model takes into account tempering parameters,carbon content and morphology for iron-carbon phases.Segregation of carbon atoms,precipitation of transition carbides(ε-carbide),decomposition of retained austenite and precipitation of cementite can be predicted respectively.The precipitation of carbides is modeled by considering the competitive precipitations ofε-carbide and cementite.The kinetics of decomposition of retained austenite into ferrite and cementite is depicted by the modified Avrami equation.To validate the model,it is applied to simulate the tempering process of the as-quenched plain carbon steel.The volume fractions of iron-carbon phase are calculated at different tempering temperature and time.It is indicated that tempering time has greater effect on the volume fraction of carbides at high temperature stage.The calculated results are reasonable consistent with the theoretical descriptions. Tempering is final process used in heat treatment of steel components.It is important to improve the toughness and ductility of the quenched steel without a great loss of the hardness and strength.However,the traditional tempering process is hard to satisfy requirements of combination mechanical properties with low cost.A quantitative model is developed to simulate the micro-structural evolution during tempering process of carbon steel by modifying the previous Ju and Inoue’s model.The model takes into account tempering parameters,carbon content and morphology for iron-carbon phases.Segregation of carbon atoms,precipitation of transition carbides(ε-carbide),decomposition of retained austenite and precipitation of cementite can be predicted respectively.The precipitation of carbides is modeled by considering the competitive precipitations ofε-carbide and cementite.The kinetics of decomposition of retained austenite into ferrite and cementite is depicted by the modified Avrami equation.To validate the model,it is applied to simulate the tempering process of the as-quenched plain carbon steel.The volume fractions of iron-carbon phase are calculated at different tempering temperature and time.It is indicated that tempering time has greater effect on the volume fraction of carbides at high temperature stage.The calculated results are reasonable consistent with the theoretical descriptions.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2012年第S1期6-12,共7页 Rare Metal Materials and Engineering
基金 support by the High-tech Research Center and Open Research Center at the Saitama Institute of Technology
关键词 TEMPERING phase transformation kinetics transition CARBIDE CEMENTITE tempering phase transformation kinetics transition carbide cementite
  • 相关文献

参考文献33

  • 1J. A. V. Leiva,E. V. Morales,E. Villar-Coci?a,C. A. Donis,Ivani S. Bott.Kinetic parameters during the tempering of low-alloy steel through the non-isothermal dilatometry[J]. Journal of Materials Science . 2010 (2) 被引量:1
  • 2P. V. Morra,A. J. B?ttger,E. J. Mittemeijer.Decomposition of Iron-based Martensite. A kinetic analysis by means of differential scanning calorimetry and dilatometry[J]. Journal of Thermal Analysis and Calorimetry . 2001 (3) 被引量:1
  • 3L. Dabrowski.Clusters in carbon martensite: Thermodynamics and kinetics[J]. Metallurgical and Materials Transactions A . 1998 (12) 被引量:1
  • 4M. J. Genderen,M. Isac,A. B?ttger,E. J. Mittemeijer.Aging and tempering behavior of iron-nickel-carbon and iron-carbon martensite[J]. Metallurgical and Materials Transactions A . 1997 (3) 被引量:1
  • 5G. R. Speich,W. C. Leslie.Tempering of steel[J]. Metallurgical Transactions . 1972 (5) 被引量:1
  • 6Wang Xiao-dong,Zhong Ning,Rong Yong-hua,et al.Novel Unltrahigh-Strength Nanolath Martensite Steel by Quenching-Partitioning-Tempering Process. Journal of Materials Re-search . 2009 被引量:1
  • 7Speer J G,Matlock D K,De Cooman B C,Schroth J G.Carbon partitioning into austenite after martensite transformation. Acta Materialia . 2003 被引量:1
  • 8C.C.Liu,X.J.Xu,Z.Liu.A FEM modeling of quenching and tempering and its application in industrial engineering. Finite Elements in Analysis and Design . 2003 被引量:1
  • 9Inoue, T,Arimoto, K,and Ju, D.Y.Metallo thermo-mechanical Simulation of Quenching Process--Theory, and Implementation of Computer Code "HEARTS"-. Proceedings of the first International Conference on Quenching and Control of Distortion . September22-251992 被引量:1
  • 10John G Speer,Fernando C Rizzo Assuno,David K Matlock, et al.The"Quenching and Partitioning"Process: Background and Recent Progress. Materials Research Bulletin . 2005 被引量:1

同被引文献28

引证文献4

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部