期刊文献+

改型GH4133A合金长期时效的性能稳定性研究 被引量:1

Study on stability of mechanical properties for modified GH4133A alloy after long-term aging
下载PDF
导出
摘要 对经过标准热处理改型GH4133A合金,在650、700和750℃进行长时间的时效处理,测量其室温拉伸和冲击性能、硬度、400℃拉伸性能和在750℃/343 MPa条件下持久性能.结果表明:在650℃和700℃下时效时,合金的性能变化规律一致,性能具有良好的稳定性.而在750℃时效时,合金的室温拉伸和400℃拉伸性能在时效500 h以前保持稳定,500 h以后随时效时间的增长而下降;合金的室温冲击性能在时效300 h以前保持稳定,300 h后下降;合金在750℃/343 MPa条件下,在时效600 h以前,持久性能寿命很稳定,基本保持在100 h左右,时效600 h以后的持久寿命迅速下降. Mechanical properties of a modified GH4133A alloy after standard heat treatment followed by long time aging treatment at 650 ℃,700 ℃ and 750 ℃ respectively were tested at room temperature and high temperature.The results indicated that the change of the tensile and impact property at room temperature,the hardness,the tensile property at 400 ℃ and stress-rupture life at 750 ℃/343 MPa is identical,and mechanical properties stability is good in the modified GH4133A alloy after long-term aging at 650 and 700 ℃.On the other hand,when the aging temperature is 750 ℃,the tensile properties at room temperature and 400 ℃ are steady before 500 h aging,and then decrease with the aging time from 500 h to 2 000 h.The impact property is steady before 300 h aging,and it begins to decrease after 300 h.The stress-rupture life at 750 ℃/343 MPa is steady before 600 h aging,the value is about 100 h,and then reduces distinctly with the aging time from 600 h to 2 000 h.
出处 《材料与冶金学报》 CAS 北大核心 2012年第3期202-206,共5页 Journal of Materials and Metallurgy
基金 国家自然基金资助项目(50901014)
关键词 改型GHA合金 长期时效 性能稳定性 modified GH4133A alloy long-term aging mechanical properties stability
  • 相关文献

参考文献4

  • 1张冬梅,国振兴,陈仲强,牛昌安,史凤岭.改型GH4133A合金长期时效的组织稳定性研究[J].材料与冶金学报,2010,9(2):121-126. 被引量:3
  • 2Nayeb-Hashemi AA,Clark JB.Phase Diagrams of Binary Magnesium Alloys[]..1988 被引量:1
  • 3Park N K,Kim I S,Na Y S,et al.Hot forging of a nickel base superalloy[].Journal of Materials.2001 被引量:1
  • 4MEDEIROSA S C,PRASADA Y V R K,FRAZIERA W G, et al.Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy[].Journal of Materials Science.2000 被引量:1

二级参考文献3

  • 1Elihu F, Bradly. Superalloys : a technical guide [ M]. Metals Park, OH, ASM International, 1988. 被引量:1
  • 2Park N K, Kim I S, Na Y S, et al. Hot forging of a nickel - base superalloy[J]. Joural of materials processing technology, 2001,111(1) : 98 -102. 被引量:1
  • 3Medeiros S C, Prasad Y V R K, Frazier W G, et al. Microstructural moldeling of metadynamic recrystallization in hot working of in 718 superalloy [J ]. Materials science and engineering A, 2000, 293 : 198 -207. 被引量:1

共引文献2

同被引文献8

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部