期刊文献+

磁集成电压调整模块中磁路耦合的反馈精确线性化解耦控制 被引量:6

State Variable Feedback Linearization Decoupled Control of Coupled Magnetic Flux on Integrating Magnetic Voltage Regulator Module
下载PDF
导出
摘要 试图利用微分几何理论实现磁集成电压调整模块非线性解耦控制。首先分析集成磁心磁路的耦合关系和等效磁路,由此建立了磁集成电压调整模块两输入两输出仿射非线性模型,并基于微分几何理论推导出对应的非线性坐标变换矩阵和非线性反馈规律表达式,得到变换器的状态反馈精确线性化模型。实验表明,磁集成电压调整模块非线性控制策略克服了磁集成中磁路耦合的影响,比现有非解耦PI控制有更好的动态品质和稳态特性,同时容易实现各相电流均流控制和磁路集成的控制解耦。 A novel differential geometry nonlinear decoupled control is proposed on integrating magnetic Voltage Regulator Module (VRM). Firstly, the couple relations of integrating magnetic core are analyzed to obtain equivalent flux circuit. Thus, a double input and double output nonlinear model is set up by impulse integral mode. The related nonlinear coordinate change matrix and the equations of nonlinear feedback principle are deduced, which can lead to a state variable feedback linearization mode. The experimental results show that the proposed integrating magnetic VRM using differential geometry nonlinear control can achieve better performance on dynamic and steady state than conventional Proportional Integral (PI) control. Meanwhile, the novel nonlinear control can decouple the coupled magnetic flux and make current sharing on each phase.
出处 《电工技术学报》 EI CSCD 北大核心 2005年第10期48-54,共7页 Transactions of China Electrotechnical Society
关键词 电压调整模块 非线性控制 磁集成 微分几何 VRM, nonlinear control, integrating magnetic, differential geometry
  • 相关文献

参考文献12

  • 1Zhou X, Zhang X, Liu J,et al. Investigation of candidate VRM topology for future microprocessors. Proceedings of the IEEE APEC, USA, 1998:145~150. 被引量:1
  • 2Wong P, Wu Q, Xu P,et al. Investigating coupling inductors in the interleaving QSW VRM. Proceedings of the IEEE Power Electronics Specialist Conference (PESC), USA, 2000: 973~978. 被引量:1
  • 3Zumel P, Garcia O, Cobos J, et al. Magnetic integration for interleaved converters. Proceedings of the IEEE Power Electronics Specialist Conference (PESC), USA, 2003: 1143~1149. 被引量:1
  • 4Mehas G. J, Coonley K D, Sullivan CR. Converter and inductor design for fast-response microprocessor power delivery. Proceedings of IEEE Power Electronics Specialist Conference (PESC), USA, 2000, 3: 1621~1626. 被引量:1
  • 5程代展.非线性系统的微分几何理论[M].北京:科学出版社,1982.. 被引量:1
  • 6卢强,孙元章著..电力系统非线性控制[M].北京:科学出版社,1993:267.
  • 7邓卫华,张波,胡宗波,卢至锋.CCM Buck变换器的状态反馈精确线性化的非线性解耦控制研究[J].中国电机工程学报,2004,24(5):120-125. 被引量:63
  • 8卢强编..输电系统最优控制[M].北京:科学出版社,1982:338.
  • 9冯纯伯,张侃健编著..非线性系统的鲁棒控制[M].北京:科学出版社,2004:214.
  • 10Zhou Xunwei, Wong Pit-Leong, et al. Investigation of candidate VRM topologies for future microprocessors. IEEE Trans on Power Electronics, 2000, 15(6): 1172~1182. 被引量:1

二级参考文献13

  • 1[1]Qian Jinrong, Lee Fred C. Charge pump power factor correction technologies part I: concept and principle. IEEE Transition on Power Electronics, 2000, 15(1): 121~128 被引量:1
  • 2[2]Tang W, Jiang Y, et al. Power factor correction with flyback converter employing charge control. IEEE APEC, USA. 1993: 293~298 被引量:1
  • 3[3]Yang E X, Hua G C, Jiang Y, et al. Isolation boost circuit for power factor correction. IEEE APEC. USA. 1993: 196~203 被引量:1
  • 4[5]Qian Jinrong, Lee Fred C. Charge pump power-factor-correc-tion technologies part II: ballast applications. IEEE Transition on Power Electronics, 2000, 15 (1): 130~139 被引量:1
  • 5Sato Y, kataoka.State feedback control of current type PWM ac-to-dc converters [J].IEEE Trans.on Ind.Appicant, 1993, (99): 1090-1097. 被引量:1
  • 6Isidori A.Nonlinear control systems.communications and control engineering series[M].3rd ed.Berlin, Germany: Springer-Verlag,1995. 被引量:1
  • 7Lee Dong-Cheen, Lee G-Myong, Lee Ki-Do.DC-bus voltage control of three-phase AC/DC PWM converter using feedback linearization[J].IEEE Trans.on Industry Application., 2000, 36(3): 826-833. 被引量:1
  • 8程代展.非线性系统的几何理论[M].北京:科学出版社,1982.. 被引量:1
  • 9罗毅,田涛,杨志远,宋春平.具有可调增益前移的自适应预估控制及其在电厂DCS中的应用[J].中国电机工程学报,2000,20(10):84-88. 被引量:20
  • 10冯平.具有分解形式的高维非线性动态电路唯一稳态研究[J].中国电机工程学报,2002,22(4):82-85. 被引量:8

共引文献66

同被引文献73

引证文献6

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部