Chestnut leaves and bran were evenly mixed according to different mass ratios,and the mixtures were sprayed and inoculated with a certain amount of prepared EM microbial liquid,and then compressed into 70 cm×40 c...Chestnut leaves and bran were evenly mixed according to different mass ratios,and the mixtures were sprayed and inoculated with a certain amount of prepared EM microbial liquid,and then compressed into 70 cm×40 cm×30 cm blocks by a fully automatic yellow-storage block compression and packaging machine.The obtained blocks were packaged and sealed with plastic film,and placed in a freely ventilated place for more than 15 d of anaerobic fermentation,so as to obtain compressed fermented chestnut leaf block feed.[Results]Through the detection and analysis of nutritional components in the compressed fermented chestnut leaf block feed in the laboratory,the protein content was equal to or greater than 10.2%,which was 44.68%higher than that of unfermented chestnut leaf feed;the tannin content was equal to or greater than 638 mg/kg,which was 18.41%lower than that of the original feed;and the crude fiber content was equal to or greater than 19.5%,which was 14.09%lower than that of the original feed.[Conclusions]This study improves the palatability of chestnut leaf feed,increases the use efficiency of feed and reduces feeding cost.It is worth popularizing.展开更多
Because of the difference ofoil and gas accumulation condition between the hanging wall and the footwall of a fault, there is a peculiar accumulation mechanism that oil and gas mainly exists in the hanging wall of the...Because of the difference ofoil and gas accumulation condition between the hanging wall and the footwall of a fault, there is a peculiar accumulation mechanism that oil and gas mainly exists in the hanging wall of the basement fault, but in the footwall of the shallow detachment fault in the Nanbaxian pool. The oil and gas of the Nanbaxian pool came from the mature Jurassic hydrocarbon source rock of the Yibei depression located at the south of the Nanbaxian pool. Firstly, the oil and gas accumulated in the traps of the hanging wall of the basement fault by way of the unconformity and the basement faults, and turned into some primary deep pools; and then, the shallow detachment fault that formed in the later tectonic movement broke into the deep primary pools, which caused the oil and gas migration upwards along the basement faults and the shallow detachment faults and the evolvement into some secondary oil and gas pools later. The history of the Nanbaxian oil and gas accumulation can be summarized successively as the syndepositional upheaval controlled by faults; single hydrocarbon source rock; unconformities and faults as migration channels; buoyancy, overpressure and tectonic stress as dynamic forces; multistage migration and accumulation of oil and gas; and finally an overlapped double-floor pattern of oil and gas accumulation. The most important explorative targets in the north of the Qaidam Basin are traps connected with the primary pools in the footwall by shallow detachment faults.展开更多
Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational ...Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational analysis theory to screen out candidate drill bits with reference values.A new comprehensive performance evaluation model of drill bit was established by constructing the absolute ideal solution,changing the relative distance measurement method,and introducing entropy weight to work out the closeness between the candidate drill bits and ideal drill bits and select the reasonable drill bit.Through the construction of absolute ideal solution,improvement of relative distance measurement method and introduction of entropy weight,the inherent defects of TOPSIS decision analysis method,such as non-absolute order,reverse order and unreasonable weight setting,can be overcome.Simple in calculation and easy to understand,the new bit selection method has good adaptability to drill bit selection using dynamic change drill bit database.Field application has proved that the drill bits selected by the new drill bit selection method had significant increase in average rate of penetration,low wear rate,and good compatibility with the drilled formations in actual drilling.This new method of drill bit selection can be used as a technical means to select drill bits with high efficiency,long life and good economics in oilfields.展开更多
基金Supported by The Fourth Batch of High-end Talent Project in Hebei ProvinceCentral Government-guided Local Science and Technology Development Project(226Z5504G)+1 种基金Tangshan Talent Funding Project(A202202005)Agricultural Science and Technology Achievement Promotion Project of Hebei Province(JNK 24083).
文摘Chestnut leaves and bran were evenly mixed according to different mass ratios,and the mixtures were sprayed and inoculated with a certain amount of prepared EM microbial liquid,and then compressed into 70 cm×40 cm×30 cm blocks by a fully automatic yellow-storage block compression and packaging machine.The obtained blocks were packaged and sealed with plastic film,and placed in a freely ventilated place for more than 15 d of anaerobic fermentation,so as to obtain compressed fermented chestnut leaf block feed.[Results]Through the detection and analysis of nutritional components in the compressed fermented chestnut leaf block feed in the laboratory,the protein content was equal to or greater than 10.2%,which was 44.68%higher than that of unfermented chestnut leaf feed;the tannin content was equal to or greater than 638 mg/kg,which was 18.41%lower than that of the original feed;and the crude fiber content was equal to or greater than 19.5%,which was 14.09%lower than that of the original feed.[Conclusions]This study improves the palatability of chestnut leaf feed,increases the use efficiency of feed and reduces feeding cost.It is worth popularizing.
文摘Because of the difference ofoil and gas accumulation condition between the hanging wall and the footwall of a fault, there is a peculiar accumulation mechanism that oil and gas mainly exists in the hanging wall of the basement fault, but in the footwall of the shallow detachment fault in the Nanbaxian pool. The oil and gas of the Nanbaxian pool came from the mature Jurassic hydrocarbon source rock of the Yibei depression located at the south of the Nanbaxian pool. Firstly, the oil and gas accumulated in the traps of the hanging wall of the basement fault by way of the unconformity and the basement faults, and turned into some primary deep pools; and then, the shallow detachment fault that formed in the later tectonic movement broke into the deep primary pools, which caused the oil and gas migration upwards along the basement faults and the shallow detachment faults and the evolvement into some secondary oil and gas pools later. The history of the Nanbaxian oil and gas accumulation can be summarized successively as the syndepositional upheaval controlled by faults; single hydrocarbon source rock; unconformities and faults as migration channels; buoyancy, overpressure and tectonic stress as dynamic forces; multistage migration and accumulation of oil and gas; and finally an overlapped double-floor pattern of oil and gas accumulation. The most important explorative targets in the north of the Qaidam Basin are traps connected with the primary pools in the footwall by shallow detachment faults.
基金Supported by China National Science and Technology Major Project(2016ZX05020-006)。
文摘Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational analysis theory to screen out candidate drill bits with reference values.A new comprehensive performance evaluation model of drill bit was established by constructing the absolute ideal solution,changing the relative distance measurement method,and introducing entropy weight to work out the closeness between the candidate drill bits and ideal drill bits and select the reasonable drill bit.Through the construction of absolute ideal solution,improvement of relative distance measurement method and introduction of entropy weight,the inherent defects of TOPSIS decision analysis method,such as non-absolute order,reverse order and unreasonable weight setting,can be overcome.Simple in calculation and easy to understand,the new bit selection method has good adaptability to drill bit selection using dynamic change drill bit database.Field application has proved that the drill bits selected by the new drill bit selection method had significant increase in average rate of penetration,low wear rate,and good compatibility with the drilled formations in actual drilling.This new method of drill bit selection can be used as a technical means to select drill bits with high efficiency,long life and good economics in oilfields.
