Ultra-high temperature ceramics(UHTCs)are generally referred to the carbides,nitrides,and borides of the transition metals,with the Group IVB compounds(Zr&Hf)and TaC as the main focus.The UHTCs are endowed with ul...Ultra-high temperature ceramics(UHTCs)are generally referred to the carbides,nitrides,and borides of the transition metals,with the Group IVB compounds(Zr&Hf)and TaC as the main focus.The UHTCs are endowed with ultra-high melting points,excellent mechanical properties,and ablation resistance at elevated temperatures.These unique combinations of properties make them promising materials for extremely environmental structural applications in rocket and hypersonic vehicles,particularly nozzles,leading edges,and engine components,etc.In addition to bulk UHTCs,UHTC coatings and fiber reinforced UHTC composites are extensively developed and applied to avoid the intrinsic brittleness and poor thermal shock resistance of bulk ceramics.Recently,high-entropy UHTCs are developed rapidly and attract a lot of attention as an emerging direction for ultra-high temperature materials.This review presents the state of the art of processing approaches,microstructure design and properties of UHTCs from bulk materials to composites and coatings,as well as the future directions.展开更多
Thermal barrier coatings(TBCs)can effectively protect the alloy substrate of hot components in aeroengines or land-based gas turbines by the thermal insulation and corrosion/erosion resistance of the ceramic top coat....Thermal barrier coatings(TBCs)can effectively protect the alloy substrate of hot components in aeroengines or land-based gas turbines by the thermal insulation and corrosion/erosion resistance of the ceramic top coat.However,the continuous pursuit of a higher operating temperature leads to degradation,delamination,and premature failure of the top coat.Both new ceramic materials and new coating structures must be developed to meet the demand for future advanced TBC systems.In this paper,the latest progress of some new ceramic materials is first reviewed.Then,a comprehensive spalling mechanism of the ceramic top coat is summarized to understand the dependence of lifetime on various factors such as oxidation scale growth,ceramic sintering,erosion,and calcium–magnesium–aluminium–silicate(CMAS)molten salt corrosion.Finally,new structural design methods for high-performance TBCs are discussed from the perspectives of lamellar,columnar,and nanostructure inclusions.The latest developments of ceramic top coat will be presented in terms of material selection,structural design,and failure mechanism,and the comprehensive guidance will be provided for the development of next-generation advanced TBCs with higher temperature resistance,better thermal insulation,and longer lifetime.展开更多
Magnesium is one of the largely available elements in the earth’s crust. It has a low structural density with high specific strength. This unique material property has forced an increase in the use of magnesium and i...Magnesium is one of the largely available elements in the earth’s crust. It has a low structural density with high specific strength. This unique material property has forced an increase in the use of magnesium and its alloys in various applications pertaining to industrial sector,automobiles, aerospace and biomedical. Since magnesium is a highly reactive metal, it is prone to higher rate of corrosion as compared to its counterparts. Thus, it is essential to analyze the corrosion behavior of magnesium and its alloys in its applications. An appropriate process is to be followed in the design and development of magnesium alloys which overcome the limitations of magnesium and enhance the desired material properties in accordance to their applications. This review paper summarizes the importance of magnesium and its material properties. The influence of various alloying elements on the mechanical properties of magnesium is reviewed. The broad classification of Mg alloys and their behavioral trends are detailed. The corrosion behavior of magnesium and the influence of corrosion products on the material characteristics of magnesium, in aqueous medium, are discussed. The manufacturing techniques of magnesium alloys along with the secondary techniques are also covered. The various applications and the limitations of magnesium in these applications are covered. A complete section is dedicated towards detailing the recent trends of magnesium(Mg) alloys, i.e., the biodegradable nature and applications of Mg alloys. The influence of biocorrosion on Mg alloys and techniques to overcome it have been deliberated. This paper provides a thorough review on recent developments of magnesium with respect to engineering applications.展开更多
The induction brazing of brass to steel using Ag-Cu-Zn-Sn filler metal was investigated in this study. The influence of A8 content on the microstructure and properties were analyzed by means of optical microscopy, sca...The induction brazing of brass to steel using Ag-Cu-Zn-Sn filler metal was investigated in this study. The influence of A8 content on the microstructure and properties were analyzed by means of optical microscopy, scanning electron microscopy and electron probe microanalysis. Defect free joint was achieved using Ag- Cu-Zn-Sn filler metal. The microstructure of the joint was mainly composed of Ag-based solid solution and Cu-based solid solution. The increase of A8 content and the cooling rate both led to the increase of the needle like eutectic structure. The tensile strength decreased with the increase of Ag content. The tensile strength at room temperature using Ag25CuZnSn filler metal reached 445 MPa. All fractures using Ag-Cu-Zn-Sn filler metal presented ductile characteristic.展开更多
The Altyn Tagh Fault and the Altyn Mountain define respectively the tectonic and geographical northern edges of the Tibetan Plateau, and figure prominently in the growth and rising mechanism of the plateau. The rhombu...The Altyn Tagh Fault and the Altyn Mountain define respectively the tectonic and geographical northern edges of the Tibetan Plateau, and figure prominently in the growth and rising mechanism of the plateau. The rhombus-shaped Altyn Mountain has long been thought to have an intimate relation with the Altyn Tagh Fault; however, its formation mechanism remains unclear and debatable. In this paper, we focus on the EW-trending uplifts in the Altyn Mountain, and investigated three Cenozoic sedimentary sections in the vicinity of the EW-trending uplifts located along the southern side of the central segment of the Altyn Tagh Fault. Magnetostratigraphy and pollen analysis were used to constrain ages of the sediments. Clast composition of conglomerate and paleocurrents obtained from clast imbrications were applied to determine the provenance. We also established a geological section parallel to the Altyn Tagh Fault on sedimentary facies across the northwestern Qaidam Basin. The results indicate that these en-echelon EW-trending uplifts formed as early as ca. 36 Ma and were preferred to be under the control of basal shear of the Altyn Tagh Fault in the middle-lower crust, symbolizing the early uplift of the Altyn Mountain during the Cenozoic. Left-slip along the Altyn Tagh Fault occurring during the Miocene and afterwards displaced and altered these uplifts, shaping the Altyn Mountain to its present fabric.展开更多
When material dimensions are reduced to the nanoscale,exceptional physical mechanics properties can be obtained that differ significantly from the corresponding bulk materials.Here we review the physical mechanics of ...When material dimensions are reduced to the nanoscale,exceptional physical mechanics properties can be obtained that differ significantly from the corresponding bulk materials.Here we review the physical mechanics of the friction of low‐dimensional nanomaterials,including zero‐dimensional nanoparticles,one‐dimensional multiwalled nanotubes and nanowires,and two‐dimensional nanomaterials-such as graphene,hexagonal boron nitride(h‐BN),and transition‐metal dichalcogenides-as well as topological insulators.Nanoparticles between solid surfaces can serve as rolling and sliding lubrication,while the interlayer friction of multiwalled nanotubes can be ultralow or significantly high and sensitive to interwall spacing and chirality matching,as well as the tube materials.The interwall friction can be several orders of magnitude higher in binary polarized h‐BN tubes than in carbon nanotubes mainly because of wall buckling.Furthermore,current extensive studies on two‐dimensional nanomaterials are comprehensively reviewed herein.In contrast to their bulk materials that serve as traditional dry lubricants(e.g.,graphite,bulk h‐BN,and MoS_(2)),large‐area high‐quality monolayered two‐dimensional nanomaterials can serve as single‐atom‐thick coatings that minimize friction and wear.In addition,by appropriately tuning the surface properties,these materials have shown great promise for creating energy‐efficient self‐powered electro‐opto‐magneto‐mechanical nanosystems.State‐of‐the‐art experimental and theoretical methods to characterize friction in nanomaterials are also introduced.展开更多
The rapid development of information technology has led to an urgent need for devices with fast information storage and processing, a high density, and low energy consumption. Memristors are considered to be next-gene...The rapid development of information technology has led to an urgent need for devices with fast information storage and processing, a high density, and low energy consumption. Memristors are considered to be next-generation memory devices with all of the aforementioned advantages. Recently, organometallic halide perovskites were reported to be promising active materials for memristors, although they have poor stability and mediocre performance. Herein, we report for the first time the fabrication of stable and high-performance memristors based on inorganic halide perovskite （CsPbBr3, CPB）. The devices have electric field-induced bipolar resistive switching （ReS） and memory behaviors with a large on/off ratio （〉105）, low working voltage （〈1 V） and energy consumption, long data retention （〉104 s）, and high environmental stability, which are achieved via ZnO capping within the devices. Such a design can be adapted to various devices. Additionally, the heterojunction between the CPB and ZnO endows the devices with a light-induced ReS effect of more than 103 with a rapid response speed （〈1 ms）, which enables us to tune the resistance state by changing the light and electric field simultaneously. Such multifunctional devices achieved by the combination of information storage and processing abilities have potential applications for future computing that transcends traditional architectures.展开更多
Many theoretical studies have been developed to study the spectral response of a fiber Bragg grating (FBG) under non-uniform strain distribution along the length of FBG in recent years. However, almost no experiments ...Many theoretical studies have been developed to study the spectral response of a fiber Bragg grating (FBG) under non-uniform strain distribution along the length of FBG in recent years. However, almost no experiments were designed to obtain the evolution of the spectrum when a FBG is subjected to non-uniform strain. In this paper, the spectral responses of a FBG under non-uniform strain distributions are given and a numerical simulation based on the Runge-Kutta method is introduced to investigate the responses of the FBG under some typical non-uniform transverse strain fields, including both linear strain gradient and quadratic strain field. Experiment is carried out by using loads applied at different locations near the FBG. Good agreements between experimental results and numerical simulations are obtained.展开更多
Far-red(FR) light regulates phytochrome-mediated morphological and physiological plant responses.This study aims to investigate how greenhouse tomato morphology and production response to different durations of FR lig...Far-red(FR) light regulates phytochrome-mediated morphological and physiological plant responses.This study aims to investigate how greenhouse tomato morphology and production response to different durations of FR light during daytime and at the end of day(EOD).High-wire tomato plants were grown under intra-canopy lighting consisting of red(peak wavelength at 640 nm) and blue(peak wavelength at 450 nm) light-emitting diodes(LEDs) with photosynthetic photon flux density(PPFD) of 144 μmol m–2 s–1 at 10 cm away from the lamps,and combined with overhead supplemental FR light(peak wavelength at 735 nm) with PPFD of 43 μmol m–2 s–1 at 20 cm below the lamps.Plants were exposed to three durations of FR supplemental lighting including: 06:00–18:00(FR12),18:00–19:30(EOD-FR1.5),18:00–18:30(EOD-FR0.5),and control that without supplemental FR light.The results showed that supplemental FR light significantly stimulated stem elongation thereby resulting in longer plants compared with the control.Moreover,FR light altered leaf morphology toward higher leaf length/width ratio and larger leaf area.The altered plant architecture in FR supplemented plants led to a more homogeneous light distribution inside the canopy.Total plant biomass was increased by 9–16% under supplemental FR light in comparison with control,which led to 7–12% increase in ripe fruit yield.Soluble sugar content of the ripe tomato fruit was slightly decreased by longer exposure of the plants to FR light.Dry matter partitioning to different plant organs were not substantially affected by the FR light treatments.No significant differences were observed among the three FR light treatments in plant morphology as well as yield and biomass production.We conclude that under intra-canopy lighting,overhead supplemental FR light stimulates tomato growth and production.And supplementary of EOD-FR0.5 is more favorable,as it consumes less electricity but induces similar effects on plant morphology and yield.展开更多
A novel oscillator structure, bimorph piezoelectric cantilever beam with two-stepped variable thicknesses,is proposed to improve the energy harvestingperformance of the vibration energy harvester (VEH) under low-frequ...A novel oscillator structure, bimorph piezoelectric cantilever beam with two-stepped variable thicknesses,is proposed to improve the energy harvestingperformance of the vibration energy harvester (VEH) under low-frequency vibration environment. Firstly, the piezoelectric cantilever is segmented to obtain the energy functions based on the Euler-Bernoulli beam assumptions, and the Galerkin approach is utilized to discretize the energy functions. Applying boundary conditions and continuity conditions enforced at separation locations, the electromechanical coupled governing equations for the piezoelectric energy harvesterareintroduced by means of the Lagrange equations. Furthermore, the steady state response expressions are obtained for harmonic base excitations at arbitrary frequencies. Numerical results are computed and the effects ofthe lengths-ratio, thicknesses-ratio,end thicknessand load resistance on the output voltage, harvested power and power density are discussed. Moreover, to verify thecorrectness ofanalytical results, the finite element method (FEM)simulationis also conducted to analyze performance of the proposed VEH, where a good agreement is presented. All the results show thatthe present oscillator structureis moreefficient than the conventional uniform beam structure, specifically, for vibration energy harvesting in low-frequency environment.展开更多
In this paper, form vulnerability theory was applied to the analysis of the failure mechanisms of single-layer latticed spherical shells subjected to seismic excitations. Three 1/10 scale testing models were designed ...In this paper, form vulnerability theory was applied to the analysis of the failure mechanisms of single-layer latticed spherical shells subjected to seismic excitations. Three 1/10 scale testing models were designed with characteristics as follows： Model 1 possesses overall uniform stiffness and is expected to collapse in the strength failure mode as some members become plastic; Model 2 possesses six man-made weak parts located on six radial main rib zones and is expected to collapse in the dynamic in- stability mode with all members still in the elastic stage; Model 3 strengthens the six weak zones of Model 2, and therefore, its stiffness is uniform. Model 3 is proposed to collapse in the strength failure mode when the members are still in the elastic stage By increasing the peak ground accelerations of seismic waves gradually, the shaking table tests were carried out until all three models collapsed （or locally collapsed）. On the basis of form vulnerability theory, topological hierarchy models of the test models were established through a clustering process, and various failure scenarios, including overall collapse scenarios and partial collapse scenarios, were identified by unzipping corresponding hierarchical models. By comparison of the failure scenarios based on theoretical analysis and experiments, it was found that vulnerability theory could effectively reflect the weak- ness zones in topological relations of the structures from the perspective of internal causes. The intemal mechanisms of the distinct failure characteristics of reticulated shells subjected to seismic excitations were also revealed in this process. The well-formedness of structural clusters, Q, is closely related to the collapse modes, i.e., uniform changes of Q indicate a uniform distribution of overall structural stiffness, which indicates that strength failure is likely to happen; conversely, non-uniform changes of Q indicate that weak zones exist in the structure, and dynamic instability is likely to occur.展开更多
A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to...A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to simulate the experiment. A recently developed multi-surface elasto-plastic constitutive model and a fully coupled dynamic inelastic FE formulation(u-p) are used to model the liquefaction behavior of the sand. The soil domains are discretized using a solid-fl uid fully coupled(u-p) 20-8 noded brick element. The pile is simulated using beam-column elements. Upon careful calibration, very good agreement is obtained between the computed and the measured dynamic behavior of the ground and the pile. A parametric analysis is also conducted on the model to investigate the effect of pile-pinning, pile diameter, pile stiffness, ground inclination angle, superstructure mass and pile head restraints on the ground improvement. It is found that the pile foundation has a noticeable pinning effect that reduces the lateral soil displacement. It is observed that a larger pile diameter and fi xed pile head restraints contribute to decreasing the lateral pile deformation; however, a higher ground inclination angle tends to increase the lateral pile head displacements and pile stiffness, and superstructure mass seems to effectively infl uence the lateral pile displacements.展开更多
Under two types of initial tropical cyclone structures that are characterized by high and low vorticity zones, four sets of numerical experiments have been performed to investigate the interaction of a tropical cyclon...Under two types of initial tropical cyclone structures that are characterized by high and low vorticity zones, four sets of numerical experiments have been performed to investigate the interaction of a tropical cyclone with an adjacent mesoscale vortex (MSV) and its impact on the tropical cyclone intensity change, using a quasi-geostrophic barotropic vorticity equation model with a horizontal resolution of 0.5 km. The results suggest that the interaction of a tropical cyclone characterized by a high vorticity zonal structure and an MSV would result in an intensification of the cyclone. Its central pressure decreases by more than 14 hPa. In the process of the interaction, the west and middle segments of the high vorticity zone evolve into two peripheral spiral bands of the tropical cyclone, and the merging of the east segment and the inward propagating MSV forms a new vorticity accumulation area, wherein the maximum vorticity is remarkably greater than that in the center of the initial tropical cyclone circulation. It is this process of merging and strengthening that causes a greater pressure decrease in the center of the tropical cyclone. This process is also more complicated than those that have been studied in the past, which indicated that only the inward transfer of vorticity of the MSV can result in the strengthening of the tropical cyclone.展开更多
Autoclaved aerated concrete(AAC) panels have ultra-light weight,excellent thermal insulation and energy absorption,so it is an ideal building material for protective structures.To improve the blast resistance of the A...Autoclaved aerated concrete(AAC) panels have ultra-light weight,excellent thermal insulation and energy absorption,so it is an ideal building material for protective structures.To improve the blast resistance of the AAC panels,three schemes are applied to strengthen the AAC panels through spraying 4 mm thick polyurea coating from top,bottom and double-sides.In three-point bending tests,the polyurea-coated AAC panels have much higher ultimate loads than the un-coated panels,but slightly lower than those strengthened by the carbon fiber reinforced plastics(CEFRPs).Close-in explosion experiments reveal the dynamic strengthening effect of the polyurea coating.Critical scaled distances of the strengthened AAC panels are acquired,which are valuable for the engineering application of the AAC panels in the extreme loading conditions.Polyurea coatings efficiently enhance the blast resistance of the bottom and double-sided polyurea-coated AAC panels.It is interesting that the polyurea-coated AAC panels have much more excellent blast resistance than the CFRP reinforced AAC panels,although the latter have better static mechanical properties.展开更多
This study presents a structural analysis algorithm called the finite particle method （FPM） for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combina...This study presents a structural analysis algorithm called the finite particle method （FPM） for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combination of the vector mechanics and numerical calculations. It models the analyzed domain composed of finite particles. Newton＇s second law is adopted to describe the motions of all particles. A convected material flame and explicit time integration for the solution procedure is also adopted in this method. By using the FPM, there is no need to solve any nonlinear equations, to calculate the stiffness matrix or equilibrium matrix, which is very helpful in the analysis of kinematically indeterminate structures. The basic formulations for the space bar are derived, following its solution procedures for bar assemblies. Three numerical examples are analyzed using the FPM. Results obtained from both the straight pretension cable and the suspension cable assembly show that the FPM can produce a more accurate analysis result. The motion simulation of the four-bar space assembly demonstrates the capability of this method in the analysis ofkinematically indeterminate structures.展开更多
A novel 0-Poisson＇s ratio cosine honeycomb support structure of flexible skin is proposed. Mechanical model of the structure is analyzed with the energy method, finite element method （FEM） and experiments have been...A novel 0-Poisson＇s ratio cosine honeycomb support structure of flexible skin is proposed. Mechanical model of the structure is analyzed with the energy method, finite element method （FEM） and experiments have been performed to validate the theoretical model. The in-plane characteristics of the cosine honeycomb are compared with accordion honeycomb through analytical models and experiments. Finally, the application of the cosine honeycomb on a variable camber wing is studied. Studies show that mechanical model agrees well with results of FEM and experiments. The transverse non-dimensional elastic modulus of the cosine honeycomb increases （decreases） when the wavelength or the wall width increases （decreases）, or when the amplitude decreases （increases）. Compared with accordion honeycomb, the transverse non-dimensional elastic modulus of the cosine honeycomb is smaller, which means the driving force is smaller and the power consumption is less during deformation. In addition, the cosine honeycomb can satisfy the deform- ing requirements of the variable camber wing.展开更多
Nonlinear parametric vibration and stability is investigated for an axially accelerating rectangular thin plate subjected to parametric excitations resulting from the axial time-varying tension and axial time-varying ...Nonlinear parametric vibration and stability is investigated for an axially accelerating rectangular thin plate subjected to parametric excitations resulting from the axial time-varying tension and axial time-varying speed in the magnetic field. Consid- ering geometric nonlinearity, based on the expressions of total kinetic energy, potential energy, and electromagnetic force, the nonlinear magneto-elastic vibration equations of axially moving rectangular thin plate are derived by using the Hamilton principle. Based on displacement mode hypothesis, by using the Galerkin method, the nonlinear para- metric oscillation equation of the axially moving rectangular thin plate with four simply supported edges in the transverse magnetic field is obtained. The nonlinear principal parametric resonance amplitude-frequency equation is further derived by means of the multiple-scale method. The stability of the steady-state solution is also discussed, and the critical condition of stability is determined. As numerical examples for an axially moving rectangular thin plate, the influences of the detuning parameter, axial speed, axial tension, and magnetic induction intensity on the principal parametric resonance behavior are investigated.展开更多
The "Structural Health Monitoring" is a project supported by National Natural Science Foundation for Distinguished Young Scholars of China(Grant No.50725828).To meet the urgent requirements of analysis and a...The "Structural Health Monitoring" is a project supported by National Natural Science Foundation for Distinguished Young Scholars of China(Grant No.50725828).To meet the urgent requirements of analysis and assessment of mass monitoring data of bridge environmental actions and structural responses,the monitoring of environmental actions and action effect modeling methods,dynamic performance monitoring and early warning methods,condition assessment and operation maintenance methods of key members are systematically studied in close combination with structural characteristics of long-span cable-stayed bridges and suspension bridges.The paper reports the progress of the project as follows.(1) The environmental action modeling methods of long-span bridges are established based on monitoring data of temperature,sustained wind and typhoon.The action effect modeling methods are further developed in combination with the multi-scale baseline finite element modeling method for long-span bridges.(2) The identification methods of global dynamic characteristics and internal forces of cables and hangers for long-span cable-stayed bridges and suspension bridges are proposed using the vibration monitoring data,on the basis of which the condition monitoring and early warning methods of bridges are developed using the environmental-condition-normalization technique.(3) The analysis methods for fatigue loading effect of welded details of steel box girder,temperature and traffic loading effect of expansion joint are presented based on long-term monitoring data of strain and beam-end displacement,on the basis of which the service performance assessment and remaining life prediction methods are developed.展开更多
The spinning solar sail of large scale has been well developed in recent years. Such a solar sail can be considered as a rigid-flexible multibody system mainly composed of a spinning central rigid hub, a number of fle...The spinning solar sail of large scale has been well developed in recent years. Such a solar sail can be considered as a rigid-flexible multibody system mainly composed of a spinning central rigid hub, a number of flexible thin tethers, sail membranes, and tip masses. A simplified interplanetary kite-craft accelerated by radiation of the Sun （IKAROS） model is established in this study by using the absolute-coordinate-based （ACB） method that combines the natural coordinate formulation （NCF） describing the central rigid hub and the absolute nodal coordinate formulation （ANCF） describing flexible parts. The initial configuration of the system in the second-stage deployment is determined through both dynamic and static analyses. The huge set of stiff equations of system dynamics is solved by using the generalized-alpha method, and thus the deployment dynamics of the system can be well understood.展开更多
基金support from the National Natural Science Foundation of China(52032001,52022072,52032003,51972243,92060202,51872239,51872059,51772061,52061135102,52002321,50632070,51272266,and 52102093)bilateral project of NSFC-JSPS(51111140017 and 51611140121)+4 种基金China Postdoctoral Science Foundation(2021M690817)Fundamental Research Funds for the Central Universities(G2020KY05125)Key Research Program of Frontier Sciences,CAS(QYZDY-SSW-JSC031)the projects supported by fee State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology(2021-KF-5)fee State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,Donghua University(KF2116)are greatly acknowledged.
文摘Ultra-high temperature ceramics(UHTCs)are generally referred to the carbides,nitrides,and borides of the transition metals,with the Group IVB compounds(Zr&Hf)and TaC as the main focus.The UHTCs are endowed with ultra-high melting points,excellent mechanical properties,and ablation resistance at elevated temperatures.These unique combinations of properties make them promising materials for extremely environmental structural applications in rocket and hypersonic vehicles,particularly nozzles,leading edges,and engine components,etc.In addition to bulk UHTCs,UHTC coatings and fiber reinforced UHTC composites are extensively developed and applied to avoid the intrinsic brittleness and poor thermal shock resistance of bulk ceramics.Recently,high-entropy UHTCs are developed rapidly and attract a lot of attention as an emerging direction for ultra-high temperature materials.This review presents the state of the art of processing approaches,microstructure design and properties of UHTCs from bulk materials to composites and coatings,as well as the future directions.
文摘Thermal barrier coatings(TBCs)can effectively protect the alloy substrate of hot components in aeroengines or land-based gas turbines by the thermal insulation and corrosion/erosion resistance of the ceramic top coat.However,the continuous pursuit of a higher operating temperature leads to degradation,delamination,and premature failure of the top coat.Both new ceramic materials and new coating structures must be developed to meet the demand for future advanced TBC systems.In this paper,the latest progress of some new ceramic materials is first reviewed.Then,a comprehensive spalling mechanism of the ceramic top coat is summarized to understand the dependence of lifetime on various factors such as oxidation scale growth,ceramic sintering,erosion,and calcium–magnesium–aluminium–silicate(CMAS)molten salt corrosion.Finally,new structural design methods for high-performance TBCs are discussed from the perspectives of lamellar,columnar,and nanostructure inclusions.The latest developments of ceramic top coat will be presented in terms of material selection,structural design,and failure mechanism,and the comprehensive guidance will be provided for the development of next-generation advanced TBCs with higher temperature resistance,better thermal insulation,and longer lifetime.
文摘Magnesium is one of the largely available elements in the earth’s crust. It has a low structural density with high specific strength. This unique material property has forced an increase in the use of magnesium and its alloys in various applications pertaining to industrial sector,automobiles, aerospace and biomedical. Since magnesium is a highly reactive metal, it is prone to higher rate of corrosion as compared to its counterparts. Thus, it is essential to analyze the corrosion behavior of magnesium and its alloys in its applications. An appropriate process is to be followed in the design and development of magnesium alloys which overcome the limitations of magnesium and enhance the desired material properties in accordance to their applications. This review paper summarizes the importance of magnesium and its material properties. The influence of various alloying elements on the mechanical properties of magnesium is reviewed. The broad classification of Mg alloys and their behavioral trends are detailed. The corrosion behavior of magnesium and the influence of corrosion products on the material characteristics of magnesium, in aqueous medium, are discussed. The manufacturing techniques of magnesium alloys along with the secondary techniques are also covered. The various applications and the limitations of magnesium in these applications are covered. A complete section is dedicated towards detailing the recent trends of magnesium(Mg) alloys, i.e., the biodegradable nature and applications of Mg alloys. The influence of biocorrosion on Mg alloys and techniques to overcome it have been deliberated. This paper provides a thorough review on recent developments of magnesium with respect to engineering applications.
基金supported by the National Natural Science Foundation of China (No. 50805038)Program for New Century Excellent Talents in University
文摘The induction brazing of brass to steel using Ag-Cu-Zn-Sn filler metal was investigated in this study. The influence of A8 content on the microstructure and properties were analyzed by means of optical microscopy, scanning electron microscopy and electron probe microanalysis. Defect free joint was achieved using Ag- Cu-Zn-Sn filler metal. The microstructure of the joint was mainly composed of Ag-based solid solution and Cu-based solid solution. The increase of A8 content and the cooling rate both led to the increase of the needle like eutectic structure. The tensile strength decreased with the increase of Ag content. The tensile strength at room temperature using Ag25CuZnSn filler metal reached 445 MPa. All fractures using Ag-Cu-Zn-Sn filler metal presented ductile characteristic.
基金supported by Chinese National Key Scientific and Technological Projects (Grant Nos. 2011ZX05009-001 and2011ZX05003-002)
文摘The Altyn Tagh Fault and the Altyn Mountain define respectively the tectonic and geographical northern edges of the Tibetan Plateau, and figure prominently in the growth and rising mechanism of the plateau. The rhombus-shaped Altyn Mountain has long been thought to have an intimate relation with the Altyn Tagh Fault; however, its formation mechanism remains unclear and debatable. In this paper, we focus on the EW-trending uplifts in the Altyn Mountain, and investigated three Cenozoic sedimentary sections in the vicinity of the EW-trending uplifts located along the southern side of the central segment of the Altyn Tagh Fault. Magnetostratigraphy and pollen analysis were used to constrain ages of the sediments. Clast composition of conglomerate and paleocurrents obtained from clast imbrications were applied to determine the provenance. We also established a geological section parallel to the Altyn Tagh Fault on sedimentary facies across the northwestern Qaidam Basin. The results indicate that these en-echelon EW-trending uplifts formed as early as ca. 36 Ma and were preferred to be under the control of basal shear of the Altyn Tagh Fault in the middle-lower crust, symbolizing the early uplift of the Altyn Mountain during the Cenozoic. Left-slip along the Altyn Tagh Fault occurring during the Miocene and afterwards displaced and altered these uplifts, shaping the Altyn Mountain to its present fabric.
基金This work was supported by The National Key Basic Research and Development(973)Program of China(2013CB932604 and 2012CB933403)The National Natural Science Foundation of China(Nos.51472117,11072109,11472131)+3 种基金the Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures(0414K01,0413G01,0413Y02)the Jiangsu NSF(BK20131356,BK20130781)the Fundamental Research Funds for the Central Universities of China(No.NE2012005)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘When material dimensions are reduced to the nanoscale,exceptional physical mechanics properties can be obtained that differ significantly from the corresponding bulk materials.Here we review the physical mechanics of the friction of low‐dimensional nanomaterials,including zero‐dimensional nanoparticles,one‐dimensional multiwalled nanotubes and nanowires,and two‐dimensional nanomaterials-such as graphene,hexagonal boron nitride(h‐BN),and transition‐metal dichalcogenides-as well as topological insulators.Nanoparticles between solid surfaces can serve as rolling and sliding lubrication,while the interlayer friction of multiwalled nanotubes can be ultralow or significantly high and sensitive to interwall spacing and chirality matching,as well as the tube materials.The interwall friction can be several orders of magnitude higher in binary polarized h‐BN tubes than in carbon nanotubes mainly because of wall buckling.Furthermore,current extensive studies on two‐dimensional nanomaterials are comprehensively reviewed herein.In contrast to their bulk materials that serve as traditional dry lubricants(e.g.,graphite,bulk h‐BN,and MoS_(2)),large‐area high‐quality monolayered two‐dimensional nanomaterials can serve as single‐atom‐thick coatings that minimize friction and wear.In addition,by appropriately tuning the surface properties,these materials have shown great promise for creating energy‐efficient self‐powered electro‐opto‐magneto‐mechanical nanosystems.State‐of‐the‐art experimental and theoretical methods to characterize friction in nanomaterials are also introduced.
文摘The rapid development of information technology has led to an urgent need for devices with fast information storage and processing, a high density, and low energy consumption. Memristors are considered to be next-generation memory devices with all of the aforementioned advantages. Recently, organometallic halide perovskites were reported to be promising active materials for memristors, although they have poor stability and mediocre performance. Herein, we report for the first time the fabrication of stable and high-performance memristors based on inorganic halide perovskite （CsPbBr3, CPB）. The devices have electric field-induced bipolar resistive switching （ReS） and memory behaviors with a large on/off ratio （〉105）, low working voltage （〈1 V） and energy consumption, long data retention （〉104 s）, and high environmental stability, which are achieved via ZnO capping within the devices. Such a design can be adapted to various devices. Additionally, the heterojunction between the CPB and ZnO endows the devices with a light-induced ReS effect of more than 103 with a rapid response speed （〈1 ms）, which enables us to tune the resistance state by changing the light and electric field simultaneously. Such multifunctional devices achieved by the combination of information storage and processing abilities have potential applications for future computing that transcends traditional architectures.
基金supported by the National High Technology Research and Development Program of China (No.2007AA03Z117)the Key Program of National Natural Science Foundation of China (No.50830201)
文摘Many theoretical studies have been developed to study the spectral response of a fiber Bragg grating (FBG) under non-uniform strain distribution along the length of FBG in recent years. However, almost no experiments were designed to obtain the evolution of the spectrum when a FBG is subjected to non-uniform strain. In this paper, the spectral responses of a FBG under non-uniform strain distributions are given and a numerical simulation based on the Runge-Kutta method is introduced to investigate the responses of the FBG under some typical non-uniform transverse strain fields, including both linear strain gradient and quadratic strain field. Experiment is carried out by using loads applied at different locations near the FBG. Good agreements between experimental results and numerical simulations are obtained.
基金supported by the National Key Research and Development Program of China (2017YFB0403902)the Young Elite Scientists Sponsorship Program by the China Association for Science and Technology (CAST,2016QNRC001)
文摘Far-red(FR) light regulates phytochrome-mediated morphological and physiological plant responses.This study aims to investigate how greenhouse tomato morphology and production response to different durations of FR light during daytime and at the end of day(EOD).High-wire tomato plants were grown under intra-canopy lighting consisting of red(peak wavelength at 640 nm) and blue(peak wavelength at 450 nm) light-emitting diodes(LEDs) with photosynthetic photon flux density(PPFD) of 144 μmol m–2 s–1 at 10 cm away from the lamps,and combined with overhead supplemental FR light(peak wavelength at 735 nm) with PPFD of 43 μmol m–2 s–1 at 20 cm below the lamps.Plants were exposed to three durations of FR supplemental lighting including: 06:00–18:00(FR12),18:00–19:30(EOD-FR1.5),18:00–18:30(EOD-FR0.5),and control that without supplemental FR light.The results showed that supplemental FR light significantly stimulated stem elongation thereby resulting in longer plants compared with the control.Moreover,FR light altered leaf morphology toward higher leaf length/width ratio and larger leaf area.The altered plant architecture in FR supplemented plants led to a more homogeneous light distribution inside the canopy.Total plant biomass was increased by 9–16% under supplemental FR light in comparison with control,which led to 7–12% increase in ripe fruit yield.Soluble sugar content of the ripe tomato fruit was slightly decreased by longer exposure of the plants to FR light.Dry matter partitioning to different plant organs were not substantially affected by the FR light treatments.No significant differences were observed among the three FR light treatments in plant morphology as well as yield and biomass production.We conclude that under intra-canopy lighting,overhead supplemental FR light stimulates tomato growth and production.And supplementary of EOD-FR0.5 is more favorable,as it consumes less electricity but induces similar effects on plant morphology and yield.
基金The authors gratefully acknowledge the support of the National Natural Science Foundation of China (Grants 11672008 and 11272016).
文摘A novel oscillator structure, bimorph piezoelectric cantilever beam with two-stepped variable thicknesses,is proposed to improve the energy harvestingperformance of the vibration energy harvester (VEH) under low-frequency vibration environment. Firstly, the piezoelectric cantilever is segmented to obtain the energy functions based on the Euler-Bernoulli beam assumptions, and the Galerkin approach is utilized to discretize the energy functions. Applying boundary conditions and continuity conditions enforced at separation locations, the electromechanical coupled governing equations for the piezoelectric energy harvesterareintroduced by means of the Lagrange equations. Furthermore, the steady state response expressions are obtained for harmonic base excitations at arbitrary frequencies. Numerical results are computed and the effects ofthe lengths-ratio, thicknesses-ratio,end thicknessand load resistance on the output voltage, harvested power and power density are discussed. Moreover, to verify thecorrectness ofanalytical results, the finite element method (FEM)simulationis also conducted to analyze performance of the proposed VEH, where a good agreement is presented. All the results show thatthe present oscillator structureis moreefficient than the conventional uniform beam structure, specifically, for vibration energy harvesting in low-frequency environment.
基金supported by the National Natural Science Foundation of China (Grant No. 90715005)the New Century Excellent Talent of Ministry of Education of China (Grant No. NCET-07-0186)the Doctoral Fund of Ministry of China (Grant No. 200802860007)
文摘In this paper, form vulnerability theory was applied to the analysis of the failure mechanisms of single-layer latticed spherical shells subjected to seismic excitations. Three 1/10 scale testing models were designed with characteristics as follows： Model 1 possesses overall uniform stiffness and is expected to collapse in the strength failure mode as some members become plastic; Model 2 possesses six man-made weak parts located on six radial main rib zones and is expected to collapse in the dynamic in- stability mode with all members still in the elastic stage; Model 3 strengthens the six weak zones of Model 2, and therefore, its stiffness is uniform. Model 3 is proposed to collapse in the strength failure mode when the members are still in the elastic stage By increasing the peak ground accelerations of seismic waves gradually, the shaking table tests were carried out until all three models collapsed （or locally collapsed）. On the basis of form vulnerability theory, topological hierarchy models of the test models were established through a clustering process, and various failure scenarios, including overall collapse scenarios and partial collapse scenarios, were identified by unzipping corresponding hierarchical models. By comparison of the failure scenarios based on theoretical analysis and experiments, it was found that vulnerability theory could effectively reflect the weak- ness zones in topological relations of the structures from the perspective of internal causes. The intemal mechanisms of the distinct failure characteristics of reticulated shells subjected to seismic excitations were also revealed in this process. The well-formedness of structural clusters, Q, is closely related to the collapse modes, i.e., uniform changes of Q indicate a uniform distribution of overall structural stiffness, which indicates that strength failure is likely to happen; conversely, non-uniform changes of Q indicate that weak zones exist in the structure, and dynamic instability is likely to occur.
基金Major Research Plan of National Natural Science Foundation of China under Grant No.90815009the National Natural Science Foundation of China under Grant Nos.51108134,50378031 and 50178027
文摘A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to simulate the experiment. A recently developed multi-surface elasto-plastic constitutive model and a fully coupled dynamic inelastic FE formulation(u-p) are used to model the liquefaction behavior of the sand. The soil domains are discretized using a solid-fl uid fully coupled(u-p) 20-8 noded brick element. The pile is simulated using beam-column elements. Upon careful calibration, very good agreement is obtained between the computed and the measured dynamic behavior of the ground and the pile. A parametric analysis is also conducted on the model to investigate the effect of pile-pinning, pile diameter, pile stiffness, ground inclination angle, superstructure mass and pile head restraints on the ground improvement. It is found that the pile foundation has a noticeable pinning effect that reduces the lateral soil displacement. It is observed that a larger pile diameter and fi xed pile head restraints contribute to decreasing the lateral pile deformation; however, a higher ground inclination angle tends to increase the lateral pile head displacements and pile stiffness, and superstructure mass seems to effectively infl uence the lateral pile displacements.
基金This work was jointly supported by the National Natural Science Foundation of China under Grant Nos.40333028 and 40175019the Key Project of the Ministry of Science and Technology of China under Grant No.2001DIA20026.
文摘Under two types of initial tropical cyclone structures that are characterized by high and low vorticity zones, four sets of numerical experiments have been performed to investigate the interaction of a tropical cyclone with an adjacent mesoscale vortex (MSV) and its impact on the tropical cyclone intensity change, using a quasi-geostrophic barotropic vorticity equation model with a horizontal resolution of 0.5 km. The results suggest that the interaction of a tropical cyclone characterized by a high vorticity zonal structure and an MSV would result in an intensification of the cyclone. Its central pressure decreases by more than 14 hPa. In the process of the interaction, the west and middle segments of the high vorticity zone evolve into two peripheral spiral bands of the tropical cyclone, and the merging of the east segment and the inward propagating MSV forms a new vorticity accumulation area, wherein the maximum vorticity is remarkably greater than that in the center of the initial tropical cyclone circulation. It is this process of merging and strengthening that causes a greater pressure decrease in the center of the tropical cyclone. This process is also more complicated than those that have been studied in the past, which indicated that only the inward transfer of vorticity of the MSV can result in the strengthening of the tropical cyclone.
基金Supports from the National Natural Science Foundation of China(11672130,51508567,51478465,and 51308544)the State Key Laboratory of Mechanics and Control of Mechanical Structures(MCMS-0217G03)the State Key Laboratory for Disaster Reduction in Civil Engineering(SLDRCE16-01)。
文摘Autoclaved aerated concrete(AAC) panels have ultra-light weight,excellent thermal insulation and energy absorption,so it is an ideal building material for protective structures.To improve the blast resistance of the AAC panels,three schemes are applied to strengthen the AAC panels through spraying 4 mm thick polyurea coating from top,bottom and double-sides.In three-point bending tests,the polyurea-coated AAC panels have much higher ultimate loads than the un-coated panels,but slightly lower than those strengthened by the carbon fiber reinforced plastics(CEFRPs).Close-in explosion experiments reveal the dynamic strengthening effect of the polyurea coating.Critical scaled distances of the strengthened AAC panels are acquired,which are valuable for the engineering application of the AAC panels in the extreme loading conditions.Polyurea coatings efficiently enhance the blast resistance of the bottom and double-sided polyurea-coated AAC panels.It is interesting that the polyurea-coated AAC panels have much more excellent blast resistance than the CFRP reinforced AAC panels,although the latter have better static mechanical properties.
基金supported by the National Natural Science Foundation of China (No. 50638050)the National High-Tech R&D (863) Program (No. 2007AA04Z441), China
文摘This study presents a structural analysis algorithm called the finite particle method （FPM） for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combination of the vector mechanics and numerical calculations. It models the analyzed domain composed of finite particles. Newton＇s second law is adopted to describe the motions of all particles. A convected material flame and explicit time integration for the solution procedure is also adopted in this method. By using the FPM, there is no need to solve any nonlinear equations, to calculate the stiffness matrix or equilibrium matrix, which is very helpful in the analysis of kinematically indeterminate structures. The basic formulations for the space bar are derived, following its solution procedures for bar assemblies. Three numerical examples are analyzed using the FPM. Results obtained from both the straight pretension cable and the suspension cable assembly show that the FPM can produce a more accurate analysis result. The motion simulation of the four-bar space assembly demonstrates the capability of this method in the analysis ofkinematically indeterminate structures.
基金co-supported by National Natural Science Foundation of China(Nos.50905085,91116020)National Science Foundation for Post-doctoral Scientists of China(No.2012M511263)
文摘A novel 0-Poisson＇s ratio cosine honeycomb support structure of flexible skin is proposed. Mechanical model of the structure is analyzed with the energy method, finite element method （FEM） and experiments have been performed to validate the theoretical model. The in-plane characteristics of the cosine honeycomb are compared with accordion honeycomb through analytical models and experiments. Finally, the application of the cosine honeycomb on a variable camber wing is studied. Studies show that mechanical model agrees well with results of FEM and experiments. The transverse non-dimensional elastic modulus of the cosine honeycomb increases （decreases） when the wavelength or the wall width increases （decreases）, or when the amplitude decreases （increases）. Compared with accordion honeycomb, the transverse non-dimensional elastic modulus of the cosine honeycomb is smaller, which means the driving force is smaller and the power consumption is less during deformation. In addition, the cosine honeycomb can satisfy the deform- ing requirements of the variable camber wing.
基金supported by the Natural Science Foundation of Hebei Province of China(No.E2010001254)
文摘Nonlinear parametric vibration and stability is investigated for an axially accelerating rectangular thin plate subjected to parametric excitations resulting from the axial time-varying tension and axial time-varying speed in the magnetic field. Consid- ering geometric nonlinearity, based on the expressions of total kinetic energy, potential energy, and electromagnetic force, the nonlinear magneto-elastic vibration equations of axially moving rectangular thin plate are derived by using the Hamilton principle. Based on displacement mode hypothesis, by using the Galerkin method, the nonlinear para- metric oscillation equation of the axially moving rectangular thin plate with four simply supported edges in the transverse magnetic field is obtained. The nonlinear principal parametric resonance amplitude-frequency equation is further derived by means of the multiple-scale method. The stability of the steady-state solution is also discussed, and the critical condition of stability is determined. As numerical examples for an axially moving rectangular thin plate, the influences of the detuning parameter, axial speed, axial tension, and magnetic induction intensity on the principal parametric resonance behavior are investigated.
基金supported by the National Natural Science Foundation for Distinguished Young Scholars of China (Grant No. 50725828)
文摘The "Structural Health Monitoring" is a project supported by National Natural Science Foundation for Distinguished Young Scholars of China(Grant No.50725828).To meet the urgent requirements of analysis and assessment of mass monitoring data of bridge environmental actions and structural responses,the monitoring of environmental actions and action effect modeling methods,dynamic performance monitoring and early warning methods,condition assessment and operation maintenance methods of key members are systematically studied in close combination with structural characteristics of long-span cable-stayed bridges and suspension bridges.The paper reports the progress of the project as follows.(1) The environmental action modeling methods of long-span bridges are established based on monitoring data of temperature,sustained wind and typhoon.The action effect modeling methods are further developed in combination with the multi-scale baseline finite element modeling method for long-span bridges.(2) The identification methods of global dynamic characteristics and internal forces of cables and hangers for long-span cable-stayed bridges and suspension bridges are proposed using the vibration monitoring data,on the basis of which the condition monitoring and early warning methods of bridges are developed using the environmental-condition-normalization technique.(3) The analysis methods for fatigue loading effect of welded details of steel box girder,temperature and traffic loading effect of expansion joint are presented based on long-term monitoring data of strain and beam-end displacement,on the basis of which the service performance assessment and remaining life prediction methods are developed.
基金supported by the National Natural Science Foundation of China (11221202 and 51075032)Excellent Young Scholar Research Fund from Beijing Institute of Technology
文摘The spinning solar sail of large scale has been well developed in recent years. Such a solar sail can be considered as a rigid-flexible multibody system mainly composed of a spinning central rigid hub, a number of flexible thin tethers, sail membranes, and tip masses. A simplified interplanetary kite-craft accelerated by radiation of the Sun （IKAROS） model is established in this study by using the absolute-coordinate-based （ACB） method that combines the natural coordinate formulation （NCF） describing the central rigid hub and the absolute nodal coordinate formulation （ANCF） describing flexible parts. The initial configuration of the system in the second-stage deployment is determined through both dynamic and static analyses. The huge set of stiff equations of system dynamics is solved by using the generalized-alpha method, and thus the deployment dynamics of the system can be well understood.
