The present paper summarizes the results of previous studies, including the structure and principle of the rotary ring flume for researching the fine sediment movement, the mechanism of the flume, method of eliminatin...The present paper summarizes the results of previous studies, including the structure and principle of the rotary ring flume for researching the fine sediment movement, the mechanism of the flume, method of eliminating the influence of the centrifugal force and sediment movement experiments with periodic alternating current. Also included are the experiment-based relationship among sediment concentration, bed shear stress and silt carrying capacity, a proposed erosion-deposition function and bed erosion-deposition calculation together with the results of verification.展开更多
A simpler and more convenient method for producing wear-resistant, TiC-reinforced coatings were investigated in this study. It consists of the simultaneous synthesis and deposition of TiC-Fe materials by oxyacetylene ...A simpler and more convenient method for producing wear-resistant, TiC-reinforced coatings were investigated in this study. It consists of the simultaneous synthesis and deposition of TiC-Fe materials by oxyacetylene flame spraying. Solid reagents bound together to form a single particle are injected into the flame stream where an in-situ reaction occurs. The reaction products are propelled onto a substrate to form a coating. Microstructural analyses reveal that TiC and Fe are the dominant phases in the coatings. The reaction between Ti and C happens step by step along with the reactive spray powder flight, and TiC-Fe materials were mainly synthesized where the spray distance is 125-170 mm. The TiC-Fe coatings are composed of alternate TiC-rich and TiC-poor lamellae with different microhardness of 11.9-13.7 and 3.0-6.0 GPa, respectively. Submicron and round TiC particles are dispersed within a ductile metal matrix. The peculiar microstructure is thought to be responsible for its good wear resistance, which is better nearly five times than WC-reinforced cermet coatings obtained by traditional oxyacetylene flame spray.展开更多
The joint distribution of wave heights and periods of individual waves is usually approximated by the joint distribution of apparent wave heights and periods. However there is difference between them. This difference ...The joint distribution of wave heights and periods of individual waves is usually approximated by the joint distribution of apparent wave heights and periods. However there is difference between them. This difference is addressed and the theoretical joint distributions of apparent wave heights and periods due to Longuet-Higgins and Sun are modified to give more reasonable representations of the joint distribution of wave heights and periods of individual waves. The modification has overcome an inherent drawback of these joint PDFs that the mean wave period is infinite. A comparison is made between the modified formulae and the field data of Goda, which shows that the new formulae consist with the measurement better than their original counterparts.展开更多
Influence of packing media on nitrogen removal in a subsurface infiltration system was studied. System A was filled with loamy soil and system B was filled with mixed soil of 75% red clay with 25% cinder. Both systems...Influence of packing media on nitrogen removal in a subsurface infiltration system was studied. System A was filled with loamy soil and system B was filled with mixed soil of 75% red clay with 25% cinder. Both systems were fed with sewage at the same hydraulic loading of 2 cm/d at continuous operation mode. The same excellent removal performances of COD and T-P could be achieved in both infiltration systems with removal rates about 85% and 98%, respectively. In system A, NH +_4-N removal rate was as high as 96.5% and T-N removal rate was relatively much lower as 55.7%. And in system B, NH +_4-N removal rate was as low as 75.4% and T-N removal rate was relatively much higher as 75.5%. The difference was attributed to different soil oxidation-reduction condition that was greatly influenced by soil texture in subsurface infiltration system. Loamy soil led to oxidative condition that was favorable to nitrification and disadvantageous to denitrification. The results were just adverse to the system filled with clay. Intermittent operation was adopted to improve nitrogen removal in system B. NH +_4-N removal rate could be increased to about 95% and T-N removal rate could be increased to about 90% at intermittent operation mode in system B. Analysis of nitrogen removal mechanisms indicated that nitrification-denitrification was the primary nitrogen removal path in subsurface infiltration system and crop uptake was another important nitrogen removal way. It was the key to improve the total N removal performance that a suitable packing soil was available to present favorable oxidation-reduction condition for simultaneous nitrification and denitrification.展开更多
In some cases, poisonous contaminants may be released from bottom sludge inopen channels. The equation of advection and diffusion for the related problem was analyzed in thispaper. The conditions for the definite solu...In some cases, poisonous contaminants may be released from bottom sludge inopen channels. The equation of advection and diffusion for the related problem was analyzed in thispaper. The conditions for the definite solution to the equation were given. The analytic solution ofpoisonous gas concentration distribution was worked out. The reasonableness of this solution wasdiscussed. The result is also of significance for other similar problems.展开更多
文摘The present paper summarizes the results of previous studies, including the structure and principle of the rotary ring flume for researching the fine sediment movement, the mechanism of the flume, method of eliminating the influence of the centrifugal force and sediment movement experiments with periodic alternating current. Also included are the experiment-based relationship among sediment concentration, bed shear stress and silt carrying capacity, a proposed erosion-deposition function and bed erosion-deposition calculation together with the results of verification.
基金This work was supported by the National "863" Project of China under grant No. 715-009-0130.
文摘A simpler and more convenient method for producing wear-resistant, TiC-reinforced coatings were investigated in this study. It consists of the simultaneous synthesis and deposition of TiC-Fe materials by oxyacetylene flame spraying. Solid reagents bound together to form a single particle are injected into the flame stream where an in-situ reaction occurs. The reaction products are propelled onto a substrate to form a coating. Microstructural analyses reveal that TiC and Fe are the dominant phases in the coatings. The reaction between Ti and C happens step by step along with the reactive spray powder flight, and TiC-Fe materials were mainly synthesized where the spray distance is 125-170 mm. The TiC-Fe coatings are composed of alternate TiC-rich and TiC-poor lamellae with different microhardness of 11.9-13.7 and 3.0-6.0 GPa, respectively. Submicron and round TiC particles are dispersed within a ductile metal matrix. The peculiar microstructure is thought to be responsible for its good wear resistance, which is better nearly five times than WC-reinforced cermet coatings obtained by traditional oxyacetylene flame spray.
文摘The joint distribution of wave heights and periods of individual waves is usually approximated by the joint distribution of apparent wave heights and periods. However there is difference between them. This difference is addressed and the theoretical joint distributions of apparent wave heights and periods due to Longuet-Higgins and Sun are modified to give more reasonable representations of the joint distribution of wave heights and periods of individual waves. The modification has overcome an inherent drawback of these joint PDFs that the mean wave period is infinite. A comparison is made between the modified formulae and the field data of Goda, which shows that the new formulae consist with the measurement better than their original counterparts.
文摘Influence of packing media on nitrogen removal in a subsurface infiltration system was studied. System A was filled with loamy soil and system B was filled with mixed soil of 75% red clay with 25% cinder. Both systems were fed with sewage at the same hydraulic loading of 2 cm/d at continuous operation mode. The same excellent removal performances of COD and T-P could be achieved in both infiltration systems with removal rates about 85% and 98%, respectively. In system A, NH +_4-N removal rate was as high as 96.5% and T-N removal rate was relatively much lower as 55.7%. And in system B, NH +_4-N removal rate was as low as 75.4% and T-N removal rate was relatively much higher as 75.5%. The difference was attributed to different soil oxidation-reduction condition that was greatly influenced by soil texture in subsurface infiltration system. Loamy soil led to oxidative condition that was favorable to nitrification and disadvantageous to denitrification. The results were just adverse to the system filled with clay. Intermittent operation was adopted to improve nitrogen removal in system B. NH +_4-N removal rate could be increased to about 95% and T-N removal rate could be increased to about 90% at intermittent operation mode in system B. Analysis of nitrogen removal mechanisms indicated that nitrification-denitrification was the primary nitrogen removal path in subsurface infiltration system and crop uptake was another important nitrogen removal way. It was the key to improve the total N removal performance that a suitable packing soil was available to present favorable oxidation-reduction condition for simultaneous nitrification and denitrification.
文摘In some cases, poisonous contaminants may be released from bottom sludge inopen channels. The equation of advection and diffusion for the related problem was analyzed in thispaper. The conditions for the definite solution to the equation were given. The analytic solution ofpoisonous gas concentration distribution was worked out. The reasonableness of this solution wasdiscussed. The result is also of significance for other similar problems.
