The Integrated Environmental Monitoring (IEM) project, part of the Asia-Pacific Environmental Innovation Strategy (APEIS) project, developed an integrated environmental monitoring system that can be used to detect, mo...The Integrated Environmental Monitoring (IEM) project, part of the Asia-Pacific Environmental Innovation Strategy (APEIS) project, developed an integrated environmental monitoring system that can be used to detect, monitor, and assess environmental disasters, degradation, and their impacts in the Asia-Pacific region. The system primarily employs data from the moderate resolution imaging spectrometer (MODIS) sensor on the Earth Observation System-(EOS-) Terra/Aqua satellite, as well as those from ground observations at five sites in different ecological systems in China. From the preliminary data analysis on both annual and daily variations of water, heat and CO2 fluxes, we can confirm that this system basically has been working well. The results show that both latent flux and CO2 flux are much greater in the crop field than those in the grassland and the saline desert, whereas the sensible heat flux shows the opposite trend. Different data products from MODIS have very different correspondence, e.g. MODIS-derived land surface temperature has a close correlation with measured ones, but LAI and NPP are quite different from ground measurements, which suggests that the algorithms used to process MODIS data need to be revised by using the local dataset. We are now using the APEIS-FLUX data to develop an integrated model, which can simulate the regional water, heat, and carbon fluxes. Finally, we are expected to use this model to develop more precise high-order MODIS products in Asia-Pacific region.展开更多
In late May and early June, 2002, a field inves- tigation was conducted along the Three-Gorges valley of the upper Yangtze catchment by ADP (Acoustic Doppler Profile SONTEK-500). Data obtained when surveying were acco...In late May and early June, 2002, a field inves- tigation was conducted along the Three-Gorges valley of the upper Yangtze catchment by ADP (Acoustic Doppler Profile SONTEK-500). Data obtained when surveying were accom- panied with discharge of <15000 m3/s in the valley and char- acterize the unique river-flow velocity profile and riverbed morphology. Taking into consideration the relationship be- tween the average flow velocity and fluvial variables, four distinct river sections can be highlighted, i.e. Chongqing- Wanxian, Wanxian-Fengjie, Fengjie-Zigui and Gezhou res- ervoir area (upstream to downstream). The average flow velocity is in-phase with river width from Chongqing to Wanxian. High-flow velocity ranging from 3.0 to 4.0 m/s is recorded at many sites, where the wider river channel (>1000 m) and shallower water depth (<20 m) occur and large-size gravel shoals prevail. Alternated low-flow velocity (<1.5 m/s) appears at those river sections with deep water (>50 m) and U-shaped river-channel morphology. Mapping the river cross-section area at those sites can determine that smaller cross-section area accelerates the flow velocity. From Wanxian to Fengjie, the average flow velocity ranging from 3.0 to 4.5 m/s is in-phase with the water depth. The high-flow velocity is associated with narrower river-channel, where V-shaped gorges valley occurs with small cross-section area. Further downstream from Fengjie to Zigui, the low flow ve- locity is linked to deep river channel characterized by W-shaped valley morphology of large cross-section area, in general. The average flow velocity is 2.5―3.5 m/s, and maxi- mum can reach 6.0 m/s near Wu-Gorge. Our survey had also detected a slow-flow velocity (mostly <1.0 m/s) in the river channel of about 100 km long in the Gezhou reservoir downstream. Heavy siltation to 20 m thick above the former riverbed and about 20 km extending upstream from the Dam site occurs above Gezhou Dam. The backwater can reach 150 km due to elevated water level to 27 m by the damming at the end of展开更多
The study presented the method for isolating the heterotrophic nitrifiers and the characterization of heterotrophic nitrification. Continuous tests via a membrane bioreactor (MBR) were operated under the controlled co...The study presented the method for isolating the heterotrophic nitrifiers and the characterization of heterotrophic nitrification. Continuous tests via a membrane bioreactor (MBR) were operated under the controlled conditions to proliferate the nitrifiers. Heterotrophic nitrifying bacteria were isolated from the system in which the efficiency of total nitrogen(TN) removal was up to 80%. Since no autotrophic ammonium and nitrite oxidizers could be detected by fluorescence in situ hybridization(FISH), oxidized-N production was unlikely to be catalyzed by autotrophic nitrifiers during the heterotrophic nitrifiers' isolation in this study. The batch test results indicate that the isolated heterotrophic bacteria were able to nitrify. After 3 weeks incubation, the efficiencies of the COD removal by the three isolated bacterial strains B1, B2, and B3 were 52 6%, 71 7%, and 77 7%, respectively. The efficiencies of the TN removal by B1, B2, and B3 were 35 6%, 61 2% and 68 7%, respectively.展开更多
文摘The Integrated Environmental Monitoring (IEM) project, part of the Asia-Pacific Environmental Innovation Strategy (APEIS) project, developed an integrated environmental monitoring system that can be used to detect, monitor, and assess environmental disasters, degradation, and their impacts in the Asia-Pacific region. The system primarily employs data from the moderate resolution imaging spectrometer (MODIS) sensor on the Earth Observation System-(EOS-) Terra/Aqua satellite, as well as those from ground observations at five sites in different ecological systems in China. From the preliminary data analysis on both annual and daily variations of water, heat and CO2 fluxes, we can confirm that this system basically has been working well. The results show that both latent flux and CO2 flux are much greater in the crop field than those in the grassland and the saline desert, whereas the sensible heat flux shows the opposite trend. Different data products from MODIS have very different correspondence, e.g. MODIS-derived land surface temperature has a close correlation with measured ones, but LAI and NPP are quite different from ground measurements, which suggests that the algorithms used to process MODIS data need to be revised by using the local dataset. We are now using the APEIS-FLUX data to develop an integrated model, which can simulate the regional water, heat, and carbon fluxes. Finally, we are expected to use this model to develop more precise high-order MODIS products in Asia-Pacific region.
基金supported by tbe National Natural Science Foundation of China(Grant No.40341009)APN/START(Grant No.2004-06-CMY)the Global Environment Research Fund of the Ministry of the Environment of Japan
文摘In late May and early June, 2002, a field inves- tigation was conducted along the Three-Gorges valley of the upper Yangtze catchment by ADP (Acoustic Doppler Profile SONTEK-500). Data obtained when surveying were accom- panied with discharge of <15000 m3/s in the valley and char- acterize the unique river-flow velocity profile and riverbed morphology. Taking into consideration the relationship be- tween the average flow velocity and fluvial variables, four distinct river sections can be highlighted, i.e. Chongqing- Wanxian, Wanxian-Fengjie, Fengjie-Zigui and Gezhou res- ervoir area (upstream to downstream). The average flow velocity is in-phase with river width from Chongqing to Wanxian. High-flow velocity ranging from 3.0 to 4.0 m/s is recorded at many sites, where the wider river channel (>1000 m) and shallower water depth (<20 m) occur and large-size gravel shoals prevail. Alternated low-flow velocity (<1.5 m/s) appears at those river sections with deep water (>50 m) and U-shaped river-channel morphology. Mapping the river cross-section area at those sites can determine that smaller cross-section area accelerates the flow velocity. From Wanxian to Fengjie, the average flow velocity ranging from 3.0 to 4.5 m/s is in-phase with the water depth. The high-flow velocity is associated with narrower river-channel, where V-shaped gorges valley occurs with small cross-section area. Further downstream from Fengjie to Zigui, the low flow ve- locity is linked to deep river channel characterized by W-shaped valley morphology of large cross-section area, in general. The average flow velocity is 2.5―3.5 m/s, and maxi- mum can reach 6.0 m/s near Wu-Gorge. Our survey had also detected a slow-flow velocity (mostly <1.0 m/s) in the river channel of about 100 km long in the Gezhou reservoir downstream. Heavy siltation to 20 m thick above the former riverbed and about 20 km extending upstream from the Dam site occurs above Gezhou Dam. The backwater can reach 150 km due to elevated water level to 27 m by the damming at the end of
文摘The study presented the method for isolating the heterotrophic nitrifiers and the characterization of heterotrophic nitrification. Continuous tests via a membrane bioreactor (MBR) were operated under the controlled conditions to proliferate the nitrifiers. Heterotrophic nitrifying bacteria were isolated from the system in which the efficiency of total nitrogen(TN) removal was up to 80%. Since no autotrophic ammonium and nitrite oxidizers could be detected by fluorescence in situ hybridization(FISH), oxidized-N production was unlikely to be catalyzed by autotrophic nitrifiers during the heterotrophic nitrifiers' isolation in this study. The batch test results indicate that the isolated heterotrophic bacteria were able to nitrify. After 3 weeks incubation, the efficiencies of the COD removal by the three isolated bacterial strains B1, B2, and B3 were 52 6%, 71 7%, and 77 7%, respectively. The efficiencies of the TN removal by B1, B2, and B3 were 35 6%, 61 2% and 68 7%, respectively.
