Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex the...Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex thermo-mechanical coupling conditions and to better understand the thermo-hydromechanical(THM) coupling behaviour of Boom Clay, a series of permeability tests using temperaturecontrolled triaxial cell has been carried out on the Boom Clay samples taken from Belgian underground research laboratory(URL) HADES. Due to its sedimentary nature, Boom Clay presents acrossanisotropy with respect to its sub-horizontal bedding plane. Direct measurements of the vertical(Kv)and horizontal(Kh)hydraulic conductivities show that the hydraulic conductivity at 80℃ is about 2.4 times larger than that at room temperature(23℃), and the hydraulic conductivity variation with temperature is basically reversible during heatingecooling cycle. The anisotropic property of Boom Clay is studied by scanning electron microscope(SEM) tests, which highlight the transversely isotropic characteristics of intact Boom Clay. It is shown that the sub-horizontal bedding feature accounts for the horizontal permeability higher than the vertical one. The measured increment in hydraulic conductivity with temperature is lower than the calculated one when merely considering the changes in water kinematic viscosity and density with temperature. The nuclear magnetic resonance(NMR) tests have also been carried out to investigate the impact of microstructure variation on the THM properties of clay. The results show that heating under unconstrained boundary condition will produce larger size of pores and weaken the microstructure. The discrepancy between the hydraulic conductivity experimentally measured and predicted(considering water viscosity and density changes with temperature) can be attributed to the microstructural weakening effect on the thermal volume change behaviour of Boom Clay. Based on the experimental results, a hydraulic conductivity展开更多
Disposal of spent nuclear fuel and long lived radioactive waste in deep clay geological formations is one of the promising options worldwide. In this concept of the geological disposal system, the host clay formation ...Disposal of spent nuclear fuel and long lived radioactive waste in deep clay geological formations is one of the promising options worldwide. In this concept of the geological disposal system, the host clay formation is considered as a principal barrier on which the fulfillment of key safety functions rests. Between 2006 and 2010, the European Commission project TIMODAZ, which gathered 15 partners from 8 countries, has investigated the coupled thermo-hydro-mechanical （THM） effects on clay formations for geological disposal of radioactive waste, and specific attention was paid to investigating the thermal effect on the evolution of the damaged zone （DZ）. Three types of potential host clay formations were investigated： the Boom Clay （Belgium）, the Opalinus Clay （Switzerland） and the Callovo-Oxfordian argillite （France）. Intensive experimental （laboratory and in situ in underground research laboratories） and numerical studies have been performed. Multi-scale approach was used in the course of the project. High degree of similarities between the failure modes, sealing process, stress paths, deformation, etc., observed in laboratories and in situ has been obtained, which increased the confidence in the applicability of laboratory test results and up-scaling perspective. The results of the laboratory and in situ tests obtained allowed the parameters for numerical models at various scales to be derived and provided the basis for the simplified performance assessment models that are used to assess the long-term safety of a repository. The good cooperation between the numerical modeler and experimenters has allowed an in-depth analysis of the experimental results and thus better understanding the underlying processes, and consequently increased the capabilities to model the THM effects in claystones. This paper presents the main achievements obtained by TIMODAZ project and shows how a European scientific community investigates a problem of concern in a collaborative way and how the obtained main 展开更多
In Belgium,the Boom clay was selected as a potential host formation for the disposal of high-level radioactive waste（HLW）.To demonstrate the suitability of Boom clay for bearing thermal load induced by the HLW,a lar...In Belgium,the Boom clay was selected as a potential host formation for the disposal of high-level radioactive waste（HLW）.To demonstrate the suitability of Boom clay for bearing thermal load induced by the HLW,a large-scale in-situ heater test,called PRACLAY heater test,will be conducted in the underground research laboratory（URL） in Mol.Owing to the limitations of the test（a short period of time compared with that considered in a real repository,different boundary conditions,etc.）,the test is designed to simulate,in a conservative way,the most critical state and phenomena that could occur in the host rock.The PRACLAY gallery was excavated at the end of 2007;the heating phase will begin in 2010 and will last for at least 10 years.The PRACLAY gallery itself leaves an opportunity to study the possibilities of sealing a disposal drift in Boom clay and testing the feasibility of hydraulic cut-off of any preferential pathway to the main access gallery through the excavation damage zone（EDZ） and the lining with a seal in a horizontal drift（horizontal seal）.Indeed,this is a generic problem for all deep geological disposal facilities for HLW.An annular seal made of compacted swelling bentonite will be installed in the front of the heated part of the PRACLAY gallery for these purposes.This paper provides detailed considerations on the thermo-hydro-mechanical（THM） boundary conditions for the design of the PRACLAY heater test and the seal test with the support of numerical calculations.It is believed that these important items considered in the PRACLAY heater test design also constitute key issues for the repository design.The outcome of the PRACLAY heater test will be an important milestone for the Belgian repository design.展开更多
In the context of research into deep nuclear waste disposal,various works have concerned the hydromechanical behavior of Boom clay,a stiff plastic clay extracted in the SCK-CEN Underground Research Laboratory near the...In the context of research into deep nuclear waste disposal,various works have concerned the hydromechanical behavior of Boom clay,a stiff plastic clay extracted in the SCK-CEN Underground Research Laboratory near the Mol City(Belgium),at a depth of 223 m.Due to some amount of smectite minerals in the clay fraction,Boom clay exhibits swelling properties when hydrated under low stresses.To investigate some aspects of the hydromechanical behavior of Boom clay,oedometer compression tests were carried out on samples of Boom clay close to saturation and submitted to an initial suction.During oedometer compression,the changes in suction with increased vertical stress are monitored by means of a high capacity tensiometer installed at the bottom of the sample.Some aspects related to hydromechanical couplings are examined through the investigation of the changes in suction during oedometer compression,a somewhat delicate and poorly documented experimental approach.A comparison is also made with a completely different soil sample under suction,i.e.a statically compacted unsaturated low plasticity silt.Some technical difficulties typical of this new experimental approach are first described in detail so as to optimize the interpretation of the data obtained.The experiment allows the determination of the point at which suction is changed to positive pressure during compression.Below this point,the ratio between the vertical stress and the change in suction are determined.Above this point,the data show that positive pore pressures are dissipated in a common way.The suction/stress behavior during unloading is also described and discussed.Finally,an interpretation in terms of microstructure effects is provided for both samples.The experimental approach initiated here seems to provide interesting further application to better understand hydromechanical couplings in natural soils in relation with suction increase during stress release.展开更多
Boom clay formation is a potential natural host rock for geological disposal of high-level nuclear waste in Belgium.Heating pulse tests with controlled power supply（maximum temperature was limited to 85℃） and contr...Boom clay formation is a potential natural host rock for geological disposal of high-level nuclear waste in Belgium.Heating pulse tests with controlled power supply（maximum temperature was limited to 85℃） and controlled hydraulic boundary conditions were performed under nearly constant volume conditions to study the impact of thermal loading on the clay formation.Selected test results of intact borehole samples retrieved in horizontal direction are presented and discussed.The study focuses on the time evolution of temperature and pore water pressure changes along heating and cooling paths,i.e.pore pressure build-up during quasi-undrained heating and later dissipation at constant temperature.展开更多
基金financial support of the National Science Foundation for Distinguished Young Scholars (Grant No. 51225902)Natural Science Foundation of China (Grant No. 51479190)EURIDICE (European Underground Research Infrastructure for Disposal of Nuclear Waste in Clay Environment, Mol, Belgium) for the work presented in this paper
文摘Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex thermo-mechanical coupling conditions and to better understand the thermo-hydromechanical(THM) coupling behaviour of Boom Clay, a series of permeability tests using temperaturecontrolled triaxial cell has been carried out on the Boom Clay samples taken from Belgian underground research laboratory(URL) HADES. Due to its sedimentary nature, Boom Clay presents acrossanisotropy with respect to its sub-horizontal bedding plane. Direct measurements of the vertical(Kv)and horizontal(Kh)hydraulic conductivities show that the hydraulic conductivity at 80℃ is about 2.4 times larger than that at room temperature(23℃), and the hydraulic conductivity variation with temperature is basically reversible during heatingecooling cycle. The anisotropic property of Boom Clay is studied by scanning electron microscope(SEM) tests, which highlight the transversely isotropic characteristics of intact Boom Clay. It is shown that the sub-horizontal bedding feature accounts for the horizontal permeability higher than the vertical one. The measured increment in hydraulic conductivity with temperature is lower than the calculated one when merely considering the changes in water kinematic viscosity and density with temperature. The nuclear magnetic resonance(NMR) tests have also been carried out to investigate the impact of microstructure variation on the THM properties of clay. The results show that heating under unconstrained boundary condition will produce larger size of pores and weaken the microstructure. The discrepancy between the hydraulic conductivity experimentally measured and predicted(considering water viscosity and density changes with temperature) can be attributed to the microstructural weakening effect on the thermal volume change behaviour of Boom Clay. Based on the experimental results, a hydraulic conductivity
基金funded by the European Commission through the TIMODAZ project within the 6th framework programme (Contract Number: FI6W-CT-2007-036449)
文摘Disposal of spent nuclear fuel and long lived radioactive waste in deep clay geological formations is one of the promising options worldwide. In this concept of the geological disposal system, the host clay formation is considered as a principal barrier on which the fulfillment of key safety functions rests. Between 2006 and 2010, the European Commission project TIMODAZ, which gathered 15 partners from 8 countries, has investigated the coupled thermo-hydro-mechanical （THM） effects on clay formations for geological disposal of radioactive waste, and specific attention was paid to investigating the thermal effect on the evolution of the damaged zone （DZ）. Three types of potential host clay formations were investigated： the Boom Clay （Belgium）, the Opalinus Clay （Switzerland） and the Callovo-Oxfordian argillite （France）. Intensive experimental （laboratory and in situ in underground research laboratories） and numerical studies have been performed. Multi-scale approach was used in the course of the project. High degree of similarities between the failure modes, sealing process, stress paths, deformation, etc., observed in laboratories and in situ has been obtained, which increased the confidence in the applicability of laboratory test results and up-scaling perspective. The results of the laboratory and in situ tests obtained allowed the parameters for numerical models at various scales to be derived and provided the basis for the simplified performance assessment models that are used to assess the long-term safety of a repository. The good cooperation between the numerical modeler and experimenters has allowed an in-depth analysis of the experimental results and thus better understanding the underlying processes, and consequently increased the capabilities to model the THM effects in claystones. This paper presents the main achievements obtained by TIMODAZ project and shows how a European scientific community investigates a problem of concern in a collaborative way and how the obtained main
文摘In Belgium,the Boom clay was selected as a potential host formation for the disposal of high-level radioactive waste（HLW）.To demonstrate the suitability of Boom clay for bearing thermal load induced by the HLW,a large-scale in-situ heater test,called PRACLAY heater test,will be conducted in the underground research laboratory（URL） in Mol.Owing to the limitations of the test（a short period of time compared with that considered in a real repository,different boundary conditions,etc.）,the test is designed to simulate,in a conservative way,the most critical state and phenomena that could occur in the host rock.The PRACLAY gallery was excavated at the end of 2007;the heating phase will begin in 2010 and will last for at least 10 years.The PRACLAY gallery itself leaves an opportunity to study the possibilities of sealing a disposal drift in Boom clay and testing the feasibility of hydraulic cut-off of any preferential pathway to the main access gallery through the excavation damage zone（EDZ） and the lining with a seal in a horizontal drift（horizontal seal）.Indeed,this is a generic problem for all deep geological disposal facilities for HLW.An annular seal made of compacted swelling bentonite will be installed in the front of the heated part of the PRACLAY gallery for these purposes.This paper provides detailed considerations on the thermo-hydro-mechanical（THM） boundary conditions for the design of the PRACLAY heater test and the seal test with the support of numerical calculations.It is believed that these important items considered in the PRACLAY heater test design also constitute key issues for the repository design.The outcome of the PRACLAY heater test will be an important milestone for the Belgian repository design.
基金EURIDICE (European Undenground Research Infn-structure for Disposal of nuclear waste In Clay Environment, Mol, Belgium)is gatefully acknowledged for the financial support provided for this workthat is part of the fist author's PhD thesis.
文摘In the context of research into deep nuclear waste disposal,various works have concerned the hydromechanical behavior of Boom clay,a stiff plastic clay extracted in the SCK-CEN Underground Research Laboratory near the Mol City(Belgium),at a depth of 223 m.Due to some amount of smectite minerals in the clay fraction,Boom clay exhibits swelling properties when hydrated under low stresses.To investigate some aspects of the hydromechanical behavior of Boom clay,oedometer compression tests were carried out on samples of Boom clay close to saturation and submitted to an initial suction.During oedometer compression,the changes in suction with increased vertical stress are monitored by means of a high capacity tensiometer installed at the bottom of the sample.Some aspects related to hydromechanical couplings are examined through the investigation of the changes in suction during oedometer compression,a somewhat delicate and poorly documented experimental approach.A comparison is also made with a completely different soil sample under suction,i.e.a statically compacted unsaturated low plasticity silt.Some technical difficulties typical of this new experimental approach are first described in detail so as to optimize the interpretation of the data obtained.The experiment allows the determination of the point at which suction is changed to positive pressure during compression.Below this point,the ratio between the vertical stress and the change in suction are determined.Above this point,the data show that positive pore pressures are dissipated in a common way.The suction/stress behavior during unloading is also described and discussed.Finally,an interpretation in terms of microstructure effects is provided for both samples.The experimental approach initiated here seems to provide interesting further application to better understand hydromechanical couplings in natural soils in relation with suction increase during stress release.
基金support provided by EIG EURIDICE/SCK.CEN(Belgium)through a PhD collaboration project with International Centre for Numerical Methods in Engineering(CIMNE,Spain)
文摘Boom clay formation is a potential natural host rock for geological disposal of high-level nuclear waste in Belgium.Heating pulse tests with controlled power supply（maximum temperature was limited to 85℃） and controlled hydraulic boundary conditions were performed under nearly constant volume conditions to study the impact of thermal loading on the clay formation.Selected test results of intact borehole samples retrieved in horizontal direction are presented and discussed.The study focuses on the time evolution of temperature and pore water pressure changes along heating and cooling paths,i.e.pore pressure build-up during quasi-undrained heating and later dissipation at constant temperature.
