A new method to test rock abrasiveness is proposed based upon the dependence of rock abrasiveness on their structural and physico-mechanical properties. The article describes the procedure of presentation of propertie...A new method to test rock abrasiveness is proposed based upon the dependence of rock abrasiveness on their structural and physico-mechanical properties. The article describes the procedure of presentation of properties that govern rock abrasiveness on a canonical scale by dimensionless components, and the integrated estimation of the properties by a generalized index. The obtained results are compared with the known classifications of rock abrasiveness.展开更多
A better understanding of gas-solid coupling laws for deep, gassy coal seams is vital for preventing the compound dynamic disasters such as rock burst and gas outburst. In this paper, a gas-solid coupling theoretical ...A better understanding of gas-solid coupling laws for deep, gassy coal seams is vital for preventing the compound dynamic disasters such as rock burst and gas outburst. In this paper, a gas-solid coupling theoretical model under the influence of ground stress, gas pressure, and mining depth is established and simulated by using COMSOL Multiphysics software. Research results indicate that under the influence of factors such as high ground stress and gas pressure, the mutual coupling interaction between coal and gas is much more significant, which leads to the emergence of new characteristics of gas compound dynamic disasters. Reducing the ground stress concentration in front of the working face can not only minimize the possibility of rock burst accidents, which are mainly caused by ground stress, but also can weaken the role of ground stress as a barrier to gas, thereby decreasing the number of outburst accidents whose dominant factor is gas. The results have a great theoretical and practical significance in terms of accident prevention, enhanced mine safety, disaster prevention system design, and improved accident emergency plans.展开更多
The typical development of total volumetric change in the focal areas of seismic events,corresponding to destress blasting,is characterized as an explosive phase followed by an implosive phase and with alternating add...The typical development of total volumetric change in the focal areas of seismic events,corresponding to destress blasting,is characterized as an explosive phase followed by an implosive phase and with alternating additional phases following on from that.In a few cases,a non-typical development of volumetric change was identified,where the first phase was implosive and the second phase,explosive.This development is mainly typical for induced seismic events recorded during mining,not for destress blasting.Seismic events were recorded during longwall mining in the Czech part of the Upper Silesian Coal Basin,where the destress blasting technique is used as a rockburst prevention active measure.Kinematic source processes in the focal areas of selected seismic events were analyzed by the seismic moment tensor inversion method,as well as by studying geomechanical rock mass conditions at the localities of the seismic events.The main goal of the analysis was to attempt to identify the reasons for non-typical development of volumetric changes in these cases.Volumetric changes were analyzed for seismic events with energy greater than 104 J,recorded in the period of time from 1993 to 2009(1109 events).80%(891)of the recorded seismic events were induced seismic events that were registered during longwall mining and 20%(218)corresponded to destress blasting events.Research shows that the main reason for the non-typical development of volumetric changes in the focal areas of seismic events is an association with destress blasting in the rock mass,which is very close to rock mass overstressing.The detonation of explosives in boreholes,which would dominate the first phase of volumetric changes,probably obscured stress release in the rock mass,as manifested in the first implosion phase of the volumetric changes in this case.展开更多
This paper sets forth a geomechanics framework for assessing the energy efficiency of rotary percussive drilling using the energy criterion, which has been proposed by Victor Oparin for volumetric destruction of high-...This paper sets forth a geomechanics framework for assessing the energy efficiency of rotary percussive drilling using the energy criterion, which has been proposed by Victor Oparin for volumetric destruction of high-stress rocks having nonuniform physico-mechanical properties. We review the long-term research and development in the specified area of science and technology, including research and development projects implemented at the Institute of Mining, Siberian Branch of the Russian Academy of Sciences. A new modified expression of Oparin’s dimensionless energy criterion of volumetric rock destruction k is introduced. The range of in situ values is determined for the energy criterion of volumetric rock destruction at the optimized energy efficiency of rotary percussive drilling. The temporospatial intervals of geotechnical monitoring are found to control pneumatic drilling energy efficiency at subsoil use objects in Russia. The integrated experimental, theoretical and geotechnical approach to the comprehensive investigation of real-time processes of rock fracture in rotary percussive drilling using the energy concept possesses the necessary geomechanical performance-and-technology potential to create the next level geotechnical monitoring of drilling systems for various purposes, including determination of physico-mechanical properties and the stress-strain analysis of rock mass in full-scale drilling.展开更多
The present article proposes an evolutionary development of the photoelasticity method for measuring stresses based on annular photoelastic sensors application along with stress pattern recording with the aid of a dig...The present article proposes an evolutionary development of the photoelasticity method for measuring stresses based on annular photoelastic sensors application along with stress pattern recording with the aid of a digital camera and its recognition using artificial neural networks.The analysis of the modern application of the photoelasticity method for various problems within the theory of strength is presented.The principle of operation of photoelastic sensors based on the photoelasticity effect is considered.Optical patterns in an annular photoelastic sensor are presented for various values of the horizontal stress.The calculation of the stress state of the sensor for the following full-scale experiment has been performed,the estimate of the threshold conditions under which the sensor can be applied has been performed.As a result of a laboratory experiment,a dataset of 1500 isochromatic images has been assembled.A subspecies of a neural network,namely a convolutional neural network,has been applied as a machine learning algorithm.Different combination of models and optimizers have been employed.The application of downhole sensors for continuous monitoring of alterations in the rock mass stress state and the integration of this data into a digital field model based on Internet of Things technologies has been proposed.展开更多
It is shown that modern achievements in the field of experimental and theoretical researches and developments of innovative measuring systems for monitoring of non-linear dynamic and kinematic characteristics allow to...It is shown that modern achievements in the field of experimental and theoretical researches and developments of innovative measuring systems for monitoring of non-linear dynamic and kinematic characteristics allow to formulate basics of new academic discipline,designated as“geomechanical thermodynamics”.The following circumstances can be considered as the most important prerequisites for development of this new discipline.(1)Practical completeness of the classical thermodynamics,based on kinetic gas theory and molecular movements in solid bodies;(2)Creation of“formular construction tool”for the description of dynamic and kinematic characteristics of pendulum waves and energy conditions of their occurrence and propagation from dynamic sources,located in multi-phased stressed rock mass and geomaterials with block-hierarchical structure;(3)Principal opportunity to establish formal relations between substantial energy carriers of“packages”of nonlinear pendulum waves(geoblocks of certain hierarchical levels according to their diameters)and“molecules”:their movement,velocity and acceleration of the“molecules”↔“geoblock”;“force interactions between molecules”↔“non-linear elastic interaction between geoblocks”,etc.The term of“geomechanical temperature”is introduced and its analytical expression,which is proportional to kinetic energy of movement of geoblocks with defined volume for their hierarchical subsequence at“confined”conditions of the stressed rock mass,is shown.The similar aspects are discussed,when emission acousticelectromagnetic fields are fixed using corresponding coefficients of mechanical-electrical and mechanicalacoustic transformations.In order to quantitively describe the evolution of energy state of local zones of stressstrain concentration and surroundings of their non-linear influence from catastrophic events at the natural and mine-engineering systems(earthquakes,rock bursts,etc.),the terms of their geomechanical and thermodynamic stages are introduced and展开更多
The paper describes the research findings on georadar detection of hydraulic fractures in hydrocarbon reservoirs.Numerical and physical modeling enables studying effect exerted by the electromagnetic properties of the...The paper describes the research findings on georadar detection of hydraulic fractures in hydrocarbon reservoirs.Numerical and physical modeling enables studying effect exerted by the electromagnetic properties of the created fracture fill and by the properties of the enclosing formation on the coefficient of high-frequency EM wave reflection from the interface.展开更多
The article focuses on a theoretical and experimental framework for the quantification of interaction between nonlinear geomechnical and physicochemical processes in high-stress coal-bearing rock mass during mining un...The article focuses on a theoretical and experimental framework for the quantification of interaction between nonlinear geomechnical and physicochemical processes in high-stress coal-bearing rock mass during mining under high seismic risk due to large-scale blasting and earthquakes,as well as because of structural and temperature effects.The tests were aimed to examine and study comprehensively the piston mechanism of gas exchange and mass transfer processes,revealed recently at the Institute of Mining,SB RAS,as well as to explain the fact that the earthquake-induced low-velocity(quasi-meter range)pendulum waves(velocity to 1 m/s and frequency of 0.5–5 Hz)could stimulate an increase in the gas content in coal mines.In order to perform laboratory investigation at the Institute of Mining SB RAS,special-purpose stand for analyzing gas exchange and mass transfer processes in coal-bearing geomaterials under various thermodynamic conditions(P,V,T)and gas composition was constructed in cooperation with the Institute of Semiconductors Physics SB RAS.Matching of air flow rate with compression pressures allowed to obtain relations showing that air flow rate increases at the uncertain time interval under the increasing of the compression pressure.The same measurements was carried out with another gases such as Hydrogen H_(2),Helium He,methane CH_(4),carbon dioxide CO_(2) and carbon oxide CO.The laboratory tests aimed to detailed investigation of the previously revealed“piston mechanism”of gas exchange and mass transfer processes in the coal specimens and their quantitative description in terms of theory of the pendulum waves were carried in the first time.Consequently,there are some arguments for the testing of the opportunity of quantitative description of the“piston mechanism”related to gas exchange and mass transfer processes in the scale of coal mines.It is relevant when pendulum waves induced by powerful earthquakes and technical blasting reaches the mine.展开更多
Some electrical parameters of the SIS-type hysteretic underdamped Josephson junction(JJ)can be measured by its current-voltage characteristics(IVCs).Currents and voltages at JJ are commensurate with the intrinsic nois...Some electrical parameters of the SIS-type hysteretic underdamped Josephson junction(JJ)can be measured by its current-voltage characteristics(IVCs).Currents and voltages at JJ are commensurate with the intrinsic noise level of measuring instruments.This leads to the need for multiple measurements with subsequent statistical processing.In this paper,the digital algorithms are proposed for the automatic measurement of the JJ parameters by IVC.These algorithms make it possible to implement multiple measurements and check these JJ parameters in an automatic mode with the required accuracy.The complete sufficient statistics are used to minimize the root-mean-square error of parameter measurement.A sequence of current pulses with slow rising and falling edges is used to drive JJ,and synchronous current and voltage readings at JJ are used to realize measurement algorithms.The algorithm performance is estimated through computer simulations.The significant advantage of the proposed algorithms is the independence from current source noise and intrinsic noise of current and voltage meters,as well as the simple implementation in automatic digital measuring systems.The proposed algorithms can be used to control JJ parameters during mass production of superconducting integrated circuits,which will improve the production efficiency and product quality.展开更多
The paper discusses geometrical characteristics and strength parameters of fan blades equipped with replaceable active part it end ended to improve the fan adjustability owing to replacement or removal of the active p...The paper discusses geometrical characteristics and strength parameters of fan blades equipped with replaceable active part it end ended to improve the fan adjustability owing to replacement or removal of the active part, which allows the fan to maintain a wide range of ventilation modes.展开更多
文摘A new method to test rock abrasiveness is proposed based upon the dependence of rock abrasiveness on their structural and physico-mechanical properties. The article describes the procedure of presentation of properties that govern rock abrasiveness on a canonical scale by dimensionless components, and the integrated estimation of the properties by a generalized index. The obtained results are compared with the known classifications of rock abrasiveness.
基金financially supported by the State Key Research Development Program of China (Nos. 2016YFC0801402, 2016YFC0600708)the National Natural Science Foundation of China (Nos. 51474219, 51304213)
文摘A better understanding of gas-solid coupling laws for deep, gassy coal seams is vital for preventing the compound dynamic disasters such as rock burst and gas outburst. In this paper, a gas-solid coupling theoretical model under the influence of ground stress, gas pressure, and mining depth is established and simulated by using COMSOL Multiphysics software. Research results indicate that under the influence of factors such as high ground stress and gas pressure, the mutual coupling interaction between coal and gas is much more significant, which leads to the emergence of new characteristics of gas compound dynamic disasters. Reducing the ground stress concentration in front of the working face can not only minimize the possibility of rock burst accidents, which are mainly caused by ground stress, but also can weaken the role of ground stress as a barrier to gas, thereby decreasing the number of outburst accidents whose dominant factor is gas. The results have a great theoretical and practical significance in terms of accident prevention, enhanced mine safety, disaster prevention system design, and improved accident emergency plans.
基金the project of the Institute of Clean Technologies for Mining and Utilisation of Raw Materials for Energy Use–Sustainability Programme(No.LO1406)supported by a project for the long-term conceptual development of research organisations(No.RVO68145535)
文摘The typical development of total volumetric change in the focal areas of seismic events,corresponding to destress blasting,is characterized as an explosive phase followed by an implosive phase and with alternating additional phases following on from that.In a few cases,a non-typical development of volumetric change was identified,where the first phase was implosive and the second phase,explosive.This development is mainly typical for induced seismic events recorded during mining,not for destress blasting.Seismic events were recorded during longwall mining in the Czech part of the Upper Silesian Coal Basin,where the destress blasting technique is used as a rockburst prevention active measure.Kinematic source processes in the focal areas of selected seismic events were analyzed by the seismic moment tensor inversion method,as well as by studying geomechanical rock mass conditions at the localities of the seismic events.The main goal of the analysis was to attempt to identify the reasons for non-typical development of volumetric changes in these cases.Volumetric changes were analyzed for seismic events with energy greater than 104 J,recorded in the period of time from 1993 to 2009(1109 events).80%(891)of the recorded seismic events were induced seismic events that were registered during longwall mining and 20%(218)corresponded to destress blasting events.Research shows that the main reason for the non-typical development of volumetric changes in the focal areas of seismic events is an association with destress blasting in the rock mass,which is very close to rock mass overstressing.The detonation of explosives in boreholes,which would dominate the first phase of volumetric changes,probably obscured stress release in the rock mass,as manifested in the first implosion phase of the volumetric changes in this case.
基金supported by the Russian Science Foundation (Grant No. 17-17-01282)RFBR (Grant No. 20-05-00051)。
文摘This paper sets forth a geomechanics framework for assessing the energy efficiency of rotary percussive drilling using the energy criterion, which has been proposed by Victor Oparin for volumetric destruction of high-stress rocks having nonuniform physico-mechanical properties. We review the long-term research and development in the specified area of science and technology, including research and development projects implemented at the Institute of Mining, Siberian Branch of the Russian Academy of Sciences. A new modified expression of Oparin’s dimensionless energy criterion of volumetric rock destruction k is introduced. The range of in situ values is determined for the energy criterion of volumetric rock destruction at the optimized energy efficiency of rotary percussive drilling. The temporospatial intervals of geotechnical monitoring are found to control pneumatic drilling energy efficiency at subsoil use objects in Russia. The integrated experimental, theoretical and geotechnical approach to the comprehensive investigation of real-time processes of rock fracture in rotary percussive drilling using the energy concept possesses the necessary geomechanical performance-and-technology potential to create the next level geotechnical monitoring of drilling systems for various purposes, including determination of physico-mechanical properties and the stress-strain analysis of rock mass in full-scale drilling.
文摘The present article proposes an evolutionary development of the photoelasticity method for measuring stresses based on annular photoelastic sensors application along with stress pattern recording with the aid of a digital camera and its recognition using artificial neural networks.The analysis of the modern application of the photoelasticity method for various problems within the theory of strength is presented.The principle of operation of photoelastic sensors based on the photoelasticity effect is considered.Optical patterns in an annular photoelastic sensor are presented for various values of the horizontal stress.The calculation of the stress state of the sensor for the following full-scale experiment has been performed,the estimate of the threshold conditions under which the sensor can be applied has been performed.As a result of a laboratory experiment,a dataset of 1500 isochromatic images has been assembled.A subspecies of a neural network,namely a convolutional neural network,has been applied as a machine learning algorithm.Different combination of models and optimizers have been employed.The application of downhole sensors for continuous monitoring of alterations in the rock mass stress state and the integration of this data into a digital field model based on Internet of Things technologies has been proposed.
基金support of Russian Foundation for Basic Research(project No.20-05-00051).
文摘It is shown that modern achievements in the field of experimental and theoretical researches and developments of innovative measuring systems for monitoring of non-linear dynamic and kinematic characteristics allow to formulate basics of new academic discipline,designated as“geomechanical thermodynamics”.The following circumstances can be considered as the most important prerequisites for development of this new discipline.(1)Practical completeness of the classical thermodynamics,based on kinetic gas theory and molecular movements in solid bodies;(2)Creation of“formular construction tool”for the description of dynamic and kinematic characteristics of pendulum waves and energy conditions of their occurrence and propagation from dynamic sources,located in multi-phased stressed rock mass and geomaterials with block-hierarchical structure;(3)Principal opportunity to establish formal relations between substantial energy carriers of“packages”of nonlinear pendulum waves(geoblocks of certain hierarchical levels according to their diameters)and“molecules”:their movement,velocity and acceleration of the“molecules”↔“geoblock”;“force interactions between molecules”↔“non-linear elastic interaction between geoblocks”,etc.The term of“geomechanical temperature”is introduced and its analytical expression,which is proportional to kinetic energy of movement of geoblocks with defined volume for their hierarchical subsequence at“confined”conditions of the stressed rock mass,is shown.The similar aspects are discussed,when emission acousticelectromagnetic fields are fixed using corresponding coefficients of mechanical-electrical and mechanicalacoustic transformations.In order to quantitively describe the evolution of energy state of local zones of stressstrain concentration and surroundings of their non-linear influence from catastrophic events at the natural and mine-engineering systems(earthquakes,rock bursts,etc.),the terms of their geomechanical and thermodynamic stages are introduced and
文摘The paper describes the research findings on georadar detection of hydraulic fractures in hydrocarbon reservoirs.Numerical and physical modeling enables studying effect exerted by the electromagnetic properties of the created fracture fill and by the properties of the enclosing formation on the coefficient of high-frequency EM wave reflection from the interface.
基金support of Russian Science Foundation (Project No.23-17-00148)as a part of R&D project (State registry No.121062200075-4).
文摘The article focuses on a theoretical and experimental framework for the quantification of interaction between nonlinear geomechnical and physicochemical processes in high-stress coal-bearing rock mass during mining under high seismic risk due to large-scale blasting and earthquakes,as well as because of structural and temperature effects.The tests were aimed to examine and study comprehensively the piston mechanism of gas exchange and mass transfer processes,revealed recently at the Institute of Mining,SB RAS,as well as to explain the fact that the earthquake-induced low-velocity(quasi-meter range)pendulum waves(velocity to 1 m/s and frequency of 0.5–5 Hz)could stimulate an increase in the gas content in coal mines.In order to perform laboratory investigation at the Institute of Mining SB RAS,special-purpose stand for analyzing gas exchange and mass transfer processes in coal-bearing geomaterials under various thermodynamic conditions(P,V,T)and gas composition was constructed in cooperation with the Institute of Semiconductors Physics SB RAS.Matching of air flow rate with compression pressures allowed to obtain relations showing that air flow rate increases at the uncertain time interval under the increasing of the compression pressure.The same measurements was carried out with another gases such as Hydrogen H_(2),Helium He,methane CH_(4),carbon dioxide CO_(2) and carbon oxide CO.The laboratory tests aimed to detailed investigation of the previously revealed“piston mechanism”of gas exchange and mass transfer processes in the coal specimens and their quantitative description in terms of theory of the pendulum waves were carried in the first time.Consequently,there are some arguments for the testing of the opportunity of quantitative description of the“piston mechanism”related to gas exchange and mass transfer processes in the scale of coal mines.It is relevant when pendulum waves induced by powerful earthquakes and technical blasting reaches the mine.
基金the Ministry of Science and Higher Education of the Russian Federation under Grant No.FSUN-2023-0007.
文摘Some electrical parameters of the SIS-type hysteretic underdamped Josephson junction(JJ)can be measured by its current-voltage characteristics(IVCs).Currents and voltages at JJ are commensurate with the intrinsic noise level of measuring instruments.This leads to the need for multiple measurements with subsequent statistical processing.In this paper,the digital algorithms are proposed for the automatic measurement of the JJ parameters by IVC.These algorithms make it possible to implement multiple measurements and check these JJ parameters in an automatic mode with the required accuracy.The complete sufficient statistics are used to minimize the root-mean-square error of parameter measurement.A sequence of current pulses with slow rising and falling edges is used to drive JJ,and synchronous current and voltage readings at JJ are used to realize measurement algorithms.The algorithm performance is estimated through computer simulations.The significant advantage of the proposed algorithms is the independence from current source noise and intrinsic noise of current and voltage meters,as well as the simple implementation in automatic digital measuring systems.The proposed algorithms can be used to control JJ parameters during mass production of superconducting integrated circuits,which will improve the production efficiency and product quality.
文摘The paper discusses geometrical characteristics and strength parameters of fan blades equipped with replaceable active part it end ended to improve the fan adjustability owing to replacement or removal of the active part, which allows the fan to maintain a wide range of ventilation modes.
