The air-solution equilibrium tension ge and dynamic surface tension gt, of nonionic surfactant alkyl polyglucoside have been studied. ge was measured by the Wilhelmy method with Krüss K12 tensiometer. The CMC a...The air-solution equilibrium tension ge and dynamic surface tension gt, of nonionic surfactant alkyl polyglucoside have been studied. ge was measured by the Wilhelmy method with Krüss K12 tensiometer. The CMC and the surface excesses Γwere determined from the surface tension vs. concentration curve. The gt decays were measured in the range 0.2～20 s using a maximum bubble pressure instrument and analyzed with the Ward and Tordai equation.展开更多
Using glycerol, glycol and water as solvent, cetyltrimethylammonium bromide (CTAB) as template, tetraethyl orthosilicate (TEOS) as silica source, ethylenediamine (EDA) as base source, mesoporous molecular sieve MCM-41...Using glycerol, glycol and water as solvent, cetyltrimethylammonium bromide (CTAB) as template, tetraethyl orthosilicate (TEOS) as silica source, ethylenediamine (EDA) as base source, mesoporous molecular sieve MCM-41 has been synthesized at room temperature, characterized by X-ray power diffraction and N2 adsorption. Compared with the samples synthesized by glycol and water, the samples synthesized by glycerol have larger pore diameter and high surface areas. Thus glycerol is an efficient solvent for preparing larger pore mesoporous MCM-41.展开更多
The surfactant TX-100 can be dissolved in ionic liquid bmimPF6 and decrease the surface tension of 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6) solutions. Here, we confirmed that in this new system, the p...The surfactant TX-100 can be dissolved in ionic liquid bmimPF6 and decrease the surface tension of 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6) solutions. Here, we confirmed that in this new system, the pure solvents need rearrangement at the air-water interface at the initial stage. The dynamic surface tension (DST) study shows that at the initial adsorption stage, the adsorption model of surfactant accords with the diffusion-controlled adsorption mechanism, and the dilute ionic liquids solutions is further close to the diffusion-controlled adsorption.展开更多
The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than th...The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than the PZNC. The structural positive charges existing in the HTlc, which cause the difference between the IEP and the PZNC. The effects of the structural positive charges of the HTlc on its IEP and PZNC are the same as the specific adsorption of metal cations.展开更多
Following hydrothermal synthesis process, MCM-41 was synthesized by using cetyltriethylammonium bromide as templating agent. The experimental results showed that MCM-41 with pore diameter in the range of 4-7 nm can be...Following hydrothermal synthesis process, MCM-41 was synthesized by using cetyltriethylammonium bromide as templating agent. The experimental results showed that MCM-41 with pore diameter in the range of 4-7 nm can be obtained by adjusting nsurf/nsi. It was proved that cetyltriethylammonium bromide is an effective templating agent for increasing pore diameter of molecular sieve MCM-41.展开更多
基金This project is supported by the National Natural Science Foundation of China (No: 29903006 29973023) State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum Institute .
文摘The air-solution equilibrium tension ge and dynamic surface tension gt, of nonionic surfactant alkyl polyglucoside have been studied. ge was measured by the Wilhelmy method with Krüss K12 tensiometer. The CMC and the surface excesses Γwere determined from the surface tension vs. concentration curve. The gt decays were measured in the range 0.2～20 s using a maximum bubble pressure instrument and analyzed with the Ward and Tordai equation.
基金supported by the National Natural Science Foundation of China(No.20233010)
文摘Using glycerol, glycol and water as solvent, cetyltrimethylammonium bromide (CTAB) as template, tetraethyl orthosilicate (TEOS) as silica source, ethylenediamine (EDA) as base source, mesoporous molecular sieve MCM-41 has been synthesized at room temperature, characterized by X-ray power diffraction and N2 adsorption. Compared with the samples synthesized by glycol and water, the samples synthesized by glycerol have larger pore diameter and high surface areas. Thus glycerol is an efficient solvent for preparing larger pore mesoporous MCM-41.
基金This project was supported by the National Natural Science Foundation of China(No.30370945)Ministry of Science and Technology(2003CCA02900)Guizhou Provincial Govemor Foundation(No.6,2001).
文摘The surfactant TX-100 can be dissolved in ionic liquid bmimPF6 and decrease the surface tension of 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6) solutions. Here, we confirmed that in this new system, the pure solvents need rearrangement at the air-water interface at the initial stage. The dynamic surface tension (DST) study shows that at the initial adsorption stage, the adsorption model of surfactant accords with the diffusion-controlled adsorption mechanism, and the dilute ionic liquids solutions is further close to the diffusion-controlled adsorption.
文摘The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than the PZNC. The structural positive charges existing in the HTlc, which cause the difference between the IEP and the PZNC. The effects of the structural positive charges of the HTlc on its IEP and PZNC are the same as the specific adsorption of metal cations.
文摘Following hydrothermal synthesis process, MCM-41 was synthesized by using cetyltriethylammonium bromide as templating agent. The experimental results showed that MCM-41 with pore diameter in the range of 4-7 nm can be obtained by adjusting nsurf/nsi. It was proved that cetyltriethylammonium bromide is an effective templating agent for increasing pore diameter of molecular sieve MCM-41.
