As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock bur...As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock burst induced by the combination of dynamic and static stresses and divided such rock burst into three types,including induced by primary dynamic stress,mainly induced by dynamic stress,and by dynamic stress in low critical stress state.The expressions of the static stress induced by coal mining and dynamic stress induced by mining tremors were obtained.Moreover,theories and technologies at home and abroad were summarized concerning the monitoring,forecasting,and preventing of rockburst.These mainly include the zoning and leveling forecasting method,electromagnetic radiation technology,elastic wave and seismic wave computed tomography technologies in aspect of rockburst monitoring,as well as the intensity weakening theory,the strong-soft-strong structure effect,the directional hydraulic fracturing technology,the roadway support system in regards of rockburst prevention.The prospect of rockburst development suggested that researches concerning the rockburst mechanism should be quantitatively developed around the roadway and coalface surrounding coal-rock mass.It should be focused on the rockburst mechanism and prevention technology of mining with over 1,000 km deep and mining in large tectonic zone.In addition,the monitoring and prevention of rockburst should be based on rockburst mechanism.展开更多
With the third innovation in science and technology worldwide, China has also experienced thismarvelous progress. Concerning the longwall mining in China, the ＂masonry beam theory＂ （MBT） wasfirst proposed in the 1...With the third innovation in science and technology worldwide, China has also experienced thismarvelous progress. Concerning the longwall mining in China, the ＂masonry beam theory＂ （MBT） wasfirst proposed in the 1960s, illustrating that the transmission and equilibrium method of overburdenpressure using reserved coal pillar in mined-out areas can be realized. This forms the so-called ＂121mining method＂, which lays a solid foundation for development of mining science and technology inChina. The ＂transfer rock beam theory＂ （TRBT） proposed in the 1980s gives a further understanding forthe transmission path of stope overburden pressure and pressure distribution in high-stress areas. In thisregard, the advanced 121 mining method was proposed with smaller coal pillar for excavation design,making significant contributions to improvement of the coal recovery rate in that era. In the 21st century,the traditional mining technologies faced great challenges and, under the theoretical developmentspioneered by Profs. Minggao Qian and Zhenqi Song, the ＂cutting cantilever beam theory＂ （CCBT） wasproposed in 2008. After that the 110 mining method is formulated subsequently, namely one stope face,after the first mining cycle, needs one advanced gateway excavation, while the other one is automaticallyformed during the last mining cycle without coal pillars left in the mining area. This method can beimplemented using the CCBT by incorporating the key technologies, including the directional presplittingroof cutting, constant resistance and large deformation （CRLD） bolt/anchor supporting systemwith negative Poisson＇s ratio （NPR） effect material, and remote real-time monitoring technology. TheCCBT and 110 mining method will provide the theoretical and technical basis for the development ofmining industry in China.展开更多
Based on the principle of fully mechanized backflling and coal mining technology and combined with the Xingtai Coal Mine conditions, we mainly optimized the coal mining equipment and adjusted the coal mining method in...Based on the principle of fully mechanized backflling and coal mining technology and combined with the Xingtai Coal Mine conditions, we mainly optimized the coal mining equipment and adjusted the coal mining method in the Xingtai Coal Mine 7606 working face for implementation this technology. Firstly, we define the practical backfilling process as the ＂（from backfilling scraper conveyor＇s） head to tail back- filling, step by step swinging up of the tamping arm, gradual compacting, moving formed backfilling scra- per conveyor when the second tamping arm cannot pass and connecting the immediate roof by back material push front material movement＂. Meanwhile, the stress changes of backfill body in coal mined out area was monitored by stress sensors, and the roof caving law was analyzed by monitoring the dynamic subsidence of -210 west roadway of this face. The site tests results show that using this new backfilling and coal mining integrated technology, the production capacity in the 7606 working face can reach to 283,000 ton a year, and 282,000 ton of solid materials （waste and fly ash） is backfilled, which meets the needs of high production and efficiency. The goaf was compactly backfilled with solid material and the strata behavior was quite desirable, with an actual maximum vertical stress of the backfill body of 5.5 MPa. Backfill body control the movement of overburden within a certain range, and there is no col- lapses of major areas in the overlying strata upon backfilled gob. The maximum subsidence and speed were 231 mm and 15.75 mm/d respectively, which proved the practical significance of this integrated technology.展开更多
When an extremely thick rock bed exists above a protected coal seam in the bending zone given the condition of a mining protective seam, this extremely thick rock bed controls the movement of the entire overlying stra...When an extremely thick rock bed exists above a protected coal seam in the bending zone given the condition of a mining protective seam, this extremely thick rock bed controls the movement of the entire overlying stratum. This extremely thick rock bed, called a ＂main key stratum＂, will not subside nor break for a long time, causing lower fractures and bed separations not to close and gas can migrate to the bed separation areas along the fractures. These bed separations become gas enrichment areas. By analyzing the rule of fracture evolution and gas migration under the main key stratum after the deep protective coal seam has been mined, we propose a new gas drainage method which uses bore holes, drilled through rock and coal seams at great depths for draining pressure relief gas. In this method, the bores are located at a high level suction roadway （we can also drill them in the drilling field located high in an air gateway）. Given the practice in the Haizi mine, the gas drainage rate can reach 73% in the middie coal group, with a gas drainage radius over 100 m.展开更多
The environmental challenges from coal mining include coal mine accidents,land subsidence,damage to the water environment,mining waste disposal and air pollution.These are either environmental pollution or landscape c...The environmental challenges from coal mining include coal mine accidents,land subsidence,damage to the water environment,mining waste disposal and air pollution.These are either environmental pollution or landscape change.A conceptual framework for solving mine environmental issues is proposed.Clean processes,or remediation measures,are designed to address environmental pollution.Restoration measures are proposed to handle landscape change.The total methane drainage from 56 Chinese high methane concentration coal mines is about 101.94 million cubic meters.Of this methane,19.32 million,35.58 million and 6.97 million cubic meters are utilized for electricity generation,civil fuel supplies and other industrial purposes,respectively.About 39% of the methane is emitted into the atmosphere.The production of coal mining wastes can be decreased 10% by reuse of mining wastes as underground fills,or by using the waste as fuel for power plants or for raw material to make bricks or other infrastructure materials.The proper use of mined land must be decided in terms of local physical and socio-economical conditions.In European countries more than 50% of previously mined lands are reclaimed as forest or grass lands.However,in China more than 70% of the mined lands are reclaimed for agricultural purposes because the large population and a shortage of farmlands make this necessary.Reconstruction of rural communities or native residential improvement is one environmental problem arising from mining.We suggest two ways to reconstruct a farmer's house in China.展开更多
During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are n...During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are not enough relevant studies at present.Based on this,the thermal damage tests of granite at different temperatures(250,350,450°C)and quenching cycles(1,5,10,15 cycles)were carried out.Preliminary reveals the damage mechanism and heat transfer law of the quenching cycle effect on hot dry rock.The results show that with the increase of temperature and cycles,the uneven thermal expansion of minerals and the thermal shock caused by quenching promote the crack development of granite,resulting in the decrease of P-wave velocity,thermal conductivity and uniaxial compressive strength of granite.Meanwhile,the COMSOL was used to simulate the heat transfer of hot dry rock under different heat treatment conditions.It concluded that the increase in the number of quenching cycles reduced the heat transfer capacity of the granite,especially more than 10 quenching cycles,which also reflects that the thermal fatigue damage leads to a longer time for the temperature recovery of the hot dry rock mass.In addition,the three-dimensional nonlinear fitting relationship among thermal conductivity,temperature and cycle number was established for the first time,which can better reveal the change rule of thermal conductivity after quenching thermal fatigue effect of hot dry rock.The research results provide theoretical support for hot dry rock reservoir reconstruction and production efficiency evaluation.展开更多
Accurate characterization and visualization of the complex inner structure and stress distribution of rocks are of vital significance to solve a variety of underground engineering problems. In this paper, we incorpora...Accurate characterization and visualization of the complex inner structure and stress distribution of rocks are of vital significance to solve a variety of underground engineering problems. In this paper, we incorporate several advanced technologies, such as CT scan, three-dimensional(3D) reconstruction, and 3D printing, to produce a physical model representing the natural coal rock that inherently contains complex fractures or joints. We employ 3D frozen stress and photoelastic technologies to characterize and visualize the stress distribution within the fractured rock under uniaxial compression. The 3D printed model presents the fracture structures identical to those of the natural prototype. The mechanical properties of the printed model,including uniaxial compression strength, elastic modulus,and Poisson's ratio, are testified to be similar to those of the prototype coal rock. The frozen stress and photoelastic tests show that the location of stress concentration and the stress gradient around the discontinuous fractures are in good agreement with the numerical predictions of the real coalsample. The proposed method appears to be capable of visually quantifying the influences of discontinuous,irregular fractures on the strength, deformation, and stress concentration of coal rock. The method of incorporating3 D printing and frozen stress technologies shows a promising way to quantify and visualize the complex fracture structures and their influences on 3D stress distribution of underground rocks, which can also be used to verify numerical simulations.展开更多
This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully ...This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.展开更多
We investigated the combined influence of joint inclination angle and joint continuity factor on deforma- tion behavior of jointed rock mass for gypsum specimens with a set of non-persistent open flaws in uni- axial c...We investigated the combined influence of joint inclination angle and joint continuity factor on deforma- tion behavior of jointed rock mass for gypsum specimens with a set of non-persistent open flaws in uni- axial compression. Complete axial stress-strain curves were classified into four types, i.e., single peak, softening after multi-peak yield platform, hardening after multi-peak yield platform and multi-peak dur- ing softening. Observation of crack evolution on the specimen surface reveals that the deformation behavior is correlated to the closure of pre-existing joint, development of fractures in rock matrix and teeth shearing of the shear plane. To investigate the brittleness of the specimens, the ratio of the residual strength to the maximum peak strength as well as the first and last peak strains were studied. At the same joint inclination angle, the ratios between residual strength and the maximum peak strength and the last peak strains increased while the first peak strain decreased with the increase of joint continuity factor. At the same joint continuity factor, the curves of the three brittleness parameters vs. joint inclina- tion angle can either be concave or convex single-oeak or wave-shaoed.展开更多
The 121 mining method of longwall mining first proposed in England has been widely used around the world.This method requires excavation of two mining roadways and reservation of one coal pillar to mine one working fa...The 121 mining method of longwall mining first proposed in England has been widely used around the world.This method requires excavation of two mining roadways and reservation of one coal pillar to mine one working face.Due to considerable excavation of roadway,the mining roadway is generally destroyed during coal mining.The stress concentration in the coal pillar can cause large deformation of surrounding rocks,rockbursts and other disasters,and subsequently a large volume of coal pillar resources will be wasted.To improve the coal recovery rate and reduce excavation of the mining roadway,the 111 mining method of longwall mining was proposed in the former Soviet Union based on the 121 mining method.The 111 mining method requires excavation of one mining roadway and setting one filling body to replace the coal pillar while maintaining another mining roadway to mine one working face.However,because the stress transfer structure of roadway and working face roof has not changed,the problem of stress concentration in the surrounding rocks of roadway has not been well solved.To solve the above problems,the conventional concept utilizing high-strength support to resist the mining pressure for the 121 and 111 mining methods should be updated.The idea is to utilize mining pressure and expansion characteristics of the collapsed rock mass in the goaf to automatically form roadways,avoiding roadway excavation and waste of coal pillar.Based on the basic principles of mining rock mechanics,the“equilibrium mining”theory and the“short cantilever beam”mechanical model are proposed.Key technologies,such as roof directional presplitting technology,negative Poisson’s ratio(NPR)high-prestress constant-resistance support technology,and gangue blocking support technology,are developed following the“equilibrium mining”theory.Accordingly,the 110 and N00 mining methods of an automatically formed roadway(AFR)by roof cutting and pressure releasing without pillars are proposed.The mining methods have been applied to a large nu展开更多
The back propagation (BP)-based artificial neural nets (ANN) can identify complicated relationships among dissolved gas contents in transformer oil and corresponding fault types, using the highly nonlinear mapping nat...The back propagation (BP)-based artificial neural nets (ANN) can identify complicated relationships among dissolved gas contents in transformer oil and corresponding fault types, using the highly nonlinear mapping nature of the neural nets. An efficient BP-ALM (BP with Adaptive Learning Rate and Momentum coefficient) algorithm is proposed to reduce the training time and avoid being trapped into local minima, where the learning rate and the momentum coefficient are altered at iterations. We developed a system of transformer fault diagnosis based on Dissolved Gases Analysis (DGA) with a BP-ALM algorithm. Training patterns were selected from the results of a Refined Three-Ratio method (RTR). Test results show that the system has a better ability of quick learning and global convergence than other methods and a superior performance in fault diagnosis compared to convectional BP-based neural networks and RTR.展开更多
Ambient benzene homologues were measured at a site in the northeastern urban area of Beijing, China, from August 24 to September 4, 2012 by SUMMA canister sampling followed by laboratory determination using cryogenic ...Ambient benzene homologues were measured at a site in the northeastern urban area of Beijing, China, from August 24 to September 4, 2012 by SUMMA canister sampling followed by laboratory determination using cryogenic cold trap pre-concentration-GC-MS/FID, and their health risks were also assessed. Daily total benzene homologues ranged from 0.99 to 49.71 μg/m3 with an average of 11.98 μg/m3. Benzene homologues showed higher concentrations in the morning and evening than that at noontime. Comparison with previous studies revealed a trend of decrease for ambient benzene homologues probably due to the effective emission control in Beijing in recent years. Vehicular exhaust was the main source while volatilization of paints and solvents also made substantial contributions. Health risk assessment showed that BTEX （benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene） and styrene had no appreciable adverse non-cancer health risks for the exposed population, while benzene has potential cancer risk of 1.34E-05. Available data from cities in China all implied that benzene imposes relatively higher cancer risk on the exposed populations and therefore strict control measures should be taken to further lower ambient benzene levels in China.展开更多
There is a more consanguineous relation be-tween nano-scale deformation of coal structure and meta-morphic-deformed environment. In different metamor-phic-deformed environments, deformation in the coal struc-ture can ...There is a more consanguineous relation be-tween nano-scale deformation of coal structure and meta-morphic-deformed environment. In different metamor-phic-deformed environments, deformation in the coal struc-ture can occur not only at micro-scale, but also at nano-scale, and even leads to the change of molecular structure and nano-scale pore (<100 nm) structure. The latter is the main space absorbing coalbed methane. Through X-ray diffraction (XRD) and liquid–nitrogen absorption methods, the charac-teristics of macromolecular and nano-scale pore structures of coals in different metamorphic-deformed environments and deformational series of coals have been studied. By combin-ing with high-resolution transmission electron microcopy (HRTEM), the macromolecular and nano-scale pore struc-tures are also directly observed. These results demonstrate that the stacking Lc of the macromolecular BSU in tectonic coals increases quickly from the metamorphic-deformed environment of low rank coals to that of high rank coals. For different deformed tectonic coals, in the same metamor-phic-deformed environment, the difference of Lc is obvious. These changes reflect chiefly the difference of different tem-perature and stress effect of nano-scale deformation in tec-tonic coals. The factor of temperature plays a greater role in the increase of macromolecular structure parameters Lc, the influence of stress factor is also important. With the stress strengthening, Lc shows an increasing trend, and La /Lc shows a decreasing trend. Therefore, Lc and La /Lc can be used as the indicator of nano-scale deformation degree of tectonic coals. With increasing temperature and pressure, especially oriented stress, the orientation of molecular structure be-comes stronger, and ordering degree of C-nets and the ar-rangement of BSU are obviously enhanced. For the deforma-tion of nano-scale pore structure, in the same metamor-phic-deformed environment, along with the strengthening of stress, the ratio of mesopores to its total pores volume of tec-toni展开更多
In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions. In our investigation,the possible processes of groundwater pollut...In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions. In our investigation,the possible processes of groundwater pollution origi-nating from underground coal gasification (UCG) were analyzed. Typical pollutants were identified and pollution con-trol measures are proposed. Groundwater pollution is caused by the diffusion and penetration of contaminants generated by underground gasification processes towards surrounding strata and the possible leaching of underground residue by natural groundwater flow after gasification. Typical organic pollutants include phenols,benzene,minor components such as PAHs and heterocyclics. Inorganic pollutants involve cations and anions. The natural groundwater flow after gasification through the seam is attributable to the migration of contaminants,which can be predicted by mathematical modeling. The extent and concentration of the groundwater pollution plume depend primarily on groundwater flow ve-locity,the degree of dispersion and the adsorption and reactions of the various contaminants. The adsorption function of coal and surrounding strata make a big contribution to the decrease of the contaminants over time and with the distance from the burn cavity. Possible pollution control measures regarding UCG include identifying a permanently,unsuitable zone,setting a hydraulic barrier and pumping contaminated water out for surface disposal. Mitigation measures during gasification processes and groundwater remediation after gasification are also proposed.展开更多
The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly ...The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly attracted for its successful development of coalbed methane(CBM). To improve the previous resource estimates and evaluate the hydrocarbon play possibilities, this study incorporated new discoveries of hydrocarbon units and their stratigraphic relation with source rocks, hydrocarbon migration and trapping configurations. Continuous hydrocarbon accumulation units were identified within the Upper Paleozoic, including the Taiyuan, Shanxi and Xiashihezi formations with great tight gas potential, and the Taiyuan and Shanxi formations also containing shale gas and CBM. Different strata combinations are identified with coal deposition and favour for continuous gas accumulations, including the tidal flat, deltaic and fluvial systems distributed in most of the study areas. Methane was not only generated from the thick coal seams in the Taiyuan and Shanxi formations, but also from shale and dark mudstones. The coal, shale and tight sandstones are proved of remarkable gas content and hydrocarbon indications, and the gas saturation of tight sandstones decreases upward. The stacked deposit combinations vary isochronally in different areas, while the coal seams were developed stably showing good gas sources. Two key stages control the hydrocarbon enrichment, the continuous subsidence from coal forming to Late Triassic and the anomalous paleo-geothermal event happened in Early Cretaceous, as indicated by the fluid inclusions evidence. Extensive areas show good hydrocarbon development potential presently, and more works should be focused on the evaluation and selection of good reservoir combinations.展开更多
The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have broug...The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have brought opportunities for coal chemical industry.However,with the large-scale popularisation of coal gasification technology,the production and resulting storage of coal gasification slag continue to increase,which not only result in serious environmental pollution and a waste of terrestrial resources,but also seriously affect the sustainable development of coal chemical enterprises.Hence,the treatment of coal gasification slag is extremely important.In this paper,the production,composition,morphology,particle size structure and water holding characteristics of coal gasification slag are introduced,and the methods of carbon ash separation of gasification slag,both domestically and abroad,are summarised.In addition,the paper also summarises the research progress on gasification slag in building materials,ecological restoration,residual carbon utilisation and other high-value utilisation,and ultimately puts forward the idea of the comprehensive utilisation of gasification slag.For large-scale consumption to solve the environmental problems of enterprises and achieve high-value utilisation to increase the economic benefits of enterprises,it is urgent to zealously design a reasonable and comprehensive utilisation technologies with simple operational processes,strong adaptability and economic benefits.展开更多
Mineralogy and geochemistry of No.6 Coal from the Heidaigou Mine of the Jungar Coalfield of North China were studied using instrumental neu- tron activation analysis,inductively coupled-plasma mass spectroscopy,X-ray ...Mineralogy and geochemistry of No.6 Coal from the Heidaigou Mine of the Jungar Coalfield of North China were studied using instrumental neu- tron activation analysis,inductively coupled-plasma mass spectroscopy,X-ray fluorescence spectrometry,and scanning electron microscope equipped with an energy-dispersive X-ray spectrometer. The results show that gallium concentration is as high as 44.8 μg·g?1 in the whole coal-channel sample,and varies from 30.1 μg·g?1 to 76.0 μg·g?1 (mean 51.9 μg·g?1) in the main minable benches of No.6 Coal. Such high concentration of Ga in the coal is far higher than the industrial grade (30 μg·g?1). The thickness of the main minable benches accounts for 81.9% of the whole coal bed. The laboratory high-temperature ashes (550℃) of the main minable coal benches also contain a high concentration of Ga,varying from 62.2 μg·g?1 to 178 μg·g?1,with an average of 89.2 μg·g?1. The boehmite significantly enriched in No.6 Coal is the main carrier of the high Ga in the coal. Average concentration of Ga in boehmite is 0.09%. The av- erage content of boehmite is 6.1% in the whole coal and 7.5% in the main minable benches. Boehmite is derived from the bauxite in the weathered crust of the underlying Benxi Formation in the north of the basin during the peat accumulation. The colloidal idrargillite had been shortly transported from the weathered crust to the peat mire,and owing to the compaction of the overlying strata during the peat accumulation and early diagenesis,the idrargillite colloid had begun to be dehydrated,leading to boehmite formation. A pre- liminary estimation showed that the ensured and prospected reserves of Ga in No.6 Coal are up to 6.3 ×104t and 8.57×105t,indicating a superlarge galliumore deposit. The particular paleogeography of the Jungar Coalfield and the peculiar carrier of Ga in coal suggest that this Ga ore deposit is unique in the world. Rare earth elements are also enriched in coal and laboratory ashes. The weighted average concentra- tion of the total rare展开更多
With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis a...With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.展开更多
Firstly, the early warning index system of coal mine safety production was given from four aspects as per- sonnel, environment, equipment and management. Then, improvement measures which are additional momentum method...Firstly, the early warning index system of coal mine safety production was given from four aspects as per- sonnel, environment, equipment and management. Then, improvement measures which are additional momentum method, adaptive learning rate, particle swarm optimization algorithm, variable weight method and asynchronous learning factor, are used to optimize BP neural network models. Further, the models are applied to a comparative study on coal mine safety warning instance. Results show that the identification precision of MPSO-BP network model is higher than GBP and PSO-BP model, and MPSO- BP model can not only effectively reduce the possibility of the network falling into a local minimum point, but also has fast convergence and high precision, which will provide the scientific basis for the forewarnin~ management of coal mine safetv production.展开更多
Simultaneous extraction of the coal and gas is an effective method of eliminating coal mine gas disasters while safely exploiting the coal and achieving efficient gas drainage in China, which is widely accepted by the...Simultaneous extraction of the coal and gas is an effective method of eliminating coal mine gas disasters while safely exploiting the coal and achieving efficient gas drainage in China, which is widely accepted by the main coal-producing countries around the world. However, the concrete definition of simultaneous extraction is vague and there is little accurate theoretical support for the simultaneous extraction of coal and gas, which makes it difficult to determine an efficient gas drainage method appropriate to the features of coal seams. Based on theoretical analysis, laboratory tests and field observations, a specific definition of simultaneous extraction of coal and gas is proposed after analyzing the characteristics of coal seam occurrences in China, and we developed the mechanism of mining-enhanced permeability and established the corresponding theoretical model. This comprises a process of fracture network formation, in which the original fractures are opened and new fractures are produced by unloading damage. According to the theoretical model, the engineering approaches and their quantitative parameters of ＇unloading by borehole drilling＇ for single coal seams and ＇unloading by protective seam mining＇ for groups of coal seams are proposed, and the construction principles for coal exploitation and gas-drainage systems for different conditions are given. These methods were applied successfully in the Tunlan Coal Mine in Shanxi Province and the Panyi Coal Mine in Anhui Province and could assure safe and efficient simultaneous extraction of coal and gas in these outburst coal mines.展开更多
基金supported by the National Natural Science Foundation of China(51174285,51104150)the Research and Innovation Project for College Graduates of Jiangsu Province(CXZZ12_0949)the National Twelfth-Five Year Research Program of China(2012BAK09B01).
文摘As one of the dynamic disasters of coal mines,rockburst seriously affects underground safe coal mining.Based on the laboratory test,field test,and theoretical analysis,this study proposed the principle of the rock burst induced by the combination of dynamic and static stresses and divided such rock burst into three types,including induced by primary dynamic stress,mainly induced by dynamic stress,and by dynamic stress in low critical stress state.The expressions of the static stress induced by coal mining and dynamic stress induced by mining tremors were obtained.Moreover,theories and technologies at home and abroad were summarized concerning the monitoring,forecasting,and preventing of rockburst.These mainly include the zoning and leveling forecasting method,electromagnetic radiation technology,elastic wave and seismic wave computed tomography technologies in aspect of rockburst monitoring,as well as the intensity weakening theory,the strong-soft-strong structure effect,the directional hydraulic fracturing technology,the roadway support system in regards of rockburst prevention.The prospect of rockburst development suggested that researches concerning the rockburst mechanism should be quantitatively developed around the roadway and coalface surrounding coal-rock mass.It should be focused on the rockburst mechanism and prevention technology of mining with over 1,000 km deep and mining in large tectonic zone.In addition,the monitoring and prevention of rockburst should be based on rockburst mechanism.
基金supported by the National Natural Science Foundation of China (No. 51404278)the State Key Program of National Natural Science Foundation of China (No. 51134005)
文摘With the third innovation in science and technology worldwide, China has also experienced thismarvelous progress. Concerning the longwall mining in China, the ＂masonry beam theory＂ （MBT） wasfirst proposed in the 1960s, illustrating that the transmission and equilibrium method of overburdenpressure using reserved coal pillar in mined-out areas can be realized. This forms the so-called ＂121mining method＂, which lays a solid foundation for development of mining science and technology inChina. The ＂transfer rock beam theory＂ （TRBT） proposed in the 1980s gives a further understanding forthe transmission path of stope overburden pressure and pressure distribution in high-stress areas. In thisregard, the advanced 121 mining method was proposed with smaller coal pillar for excavation design,making significant contributions to improvement of the coal recovery rate in that era. In the 21st century,the traditional mining technologies faced great challenges and, under the theoretical developmentspioneered by Profs. Minggao Qian and Zhenqi Song, the ＂cutting cantilever beam theory＂ （CCBT） wasproposed in 2008. After that the 110 mining method is formulated subsequently, namely one stope face,after the first mining cycle, needs one advanced gateway excavation, while the other one is automaticallyformed during the last mining cycle without coal pillars left in the mining area. This method can beimplemented using the CCBT by incorporating the key technologies, including the directional presplittingroof cutting, constant resistance and large deformation （CRLD） bolt/anchor supporting systemwith negative Poisson＇s ratio （NPR） effect material, and remote real-time monitoring technology. TheCCBT and 110 mining method will provide the theoretical and technical basis for the development ofmining industry in China.
基金Financial supports for this work provided by the National Natural Science Foundation of China (No. 51074165)the Key Program of National Natural Science Foundation of China (No.50834004)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (No.SZBF2011-6-B35)
文摘Based on the principle of fully mechanized backflling and coal mining technology and combined with the Xingtai Coal Mine conditions, we mainly optimized the coal mining equipment and adjusted the coal mining method in the Xingtai Coal Mine 7606 working face for implementation this technology. Firstly, we define the practical backfilling process as the ＂（from backfilling scraper conveyor＇s） head to tail back- filling, step by step swinging up of the tamping arm, gradual compacting, moving formed backfilling scra- per conveyor when the second tamping arm cannot pass and connecting the immediate roof by back material push front material movement＂. Meanwhile, the stress changes of backfill body in coal mined out area was monitored by stress sensors, and the roof caving law was analyzed by monitoring the dynamic subsidence of -210 west roadway of this face. The site tests results show that using this new backfilling and coal mining integrated technology, the production capacity in the 7606 working face can reach to 283,000 ton a year, and 282,000 ton of solid materials （waste and fly ash） is backfilled, which meets the needs of high production and efficiency. The goaf was compactly backfilled with solid material and the strata behavior was quite desirable, with an actual maximum vertical stress of the backfill body of 5.5 MPa. Backfill body control the movement of overburden within a certain range, and there is no col- lapses of major areas in the overlying strata upon backfilled gob. The maximum subsidence and speed were 231 mm and 15.75 mm/d respectively, which proved the practical significance of this integrated technology.
基金Projects 2005CB221503 supported by the National Basic Research Program of China70533050 and 50674089 by the National Natural Science Foundation of China2005BA813B-3-06 by the National Tenth 5-Year Key Scientific and Technological Project
文摘When an extremely thick rock bed exists above a protected coal seam in the bending zone given the condition of a mining protective seam, this extremely thick rock bed controls the movement of the entire overlying stratum. This extremely thick rock bed, called a ＂main key stratum＂, will not subside nor break for a long time, causing lower fractures and bed separations not to close and gas can migrate to the bed separation areas along the fractures. These bed separations become gas enrichment areas. By analyzing the rule of fracture evolution and gas migration under the main key stratum after the deep protective coal seam has been mined, we propose a new gas drainage method which uses bore holes, drilled through rock and coal seams at great depths for draining pressure relief gas. In this method, the bores are located at a high level suction roadway （we can also drill them in the drilling field located high in an air gateway）. Given the practice in the Haizi mine, the gas drainage rate can reach 73% in the middie coal group, with a gas drainage radius over 100 m.
基金supported by the 111 Project (No.B07028)the Project for New Century Talents of Ministry of Education of China (No.NCET-04-0487)supported by the Natural Science Foundation of Jiangsu Province of China (No.50574095)
文摘The environmental challenges from coal mining include coal mine accidents,land subsidence,damage to the water environment,mining waste disposal and air pollution.These are either environmental pollution or landscape change.A conceptual framework for solving mine environmental issues is proposed.Clean processes,or remediation measures,are designed to address environmental pollution.Restoration measures are proposed to handle landscape change.The total methane drainage from 56 Chinese high methane concentration coal mines is about 101.94 million cubic meters.Of this methane,19.32 million,35.58 million and 6.97 million cubic meters are utilized for electricity generation,civil fuel supplies and other industrial purposes,respectively.About 39% of the methane is emitted into the atmosphere.The production of coal mining wastes can be decreased 10% by reuse of mining wastes as underground fills,or by using the waste as fuel for power plants or for raw material to make bricks or other infrastructure materials.The proper use of mined land must be decided in terms of local physical and socio-economical conditions.In European countries more than 50% of previously mined lands are reclaimed as forest or grass lands.However,in China more than 70% of the mined lands are reclaimed for agricultural purposes because the large population and a shortage of farmlands make this necessary.Reconstruction of rural communities or native residential improvement is one environmental problem arising from mining.We suggest two ways to reconstruct a farmer's house in China.
基金financially supported by National Natural Science Foundation of China(Nos.U2013603,52004167,52078477,51827901,and U1965203)Sichuan International Technological innovation Cooperation Project(No.2018HH0159)。
文摘During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are not enough relevant studies at present.Based on this,the thermal damage tests of granite at different temperatures(250,350,450°C)and quenching cycles(1,5,10,15 cycles)were carried out.Preliminary reveals the damage mechanism and heat transfer law of the quenching cycle effect on hot dry rock.The results show that with the increase of temperature and cycles,the uneven thermal expansion of minerals and the thermal shock caused by quenching promote the crack development of granite,resulting in the decrease of P-wave velocity,thermal conductivity and uniaxial compressive strength of granite.Meanwhile,the COMSOL was used to simulate the heat transfer of hot dry rock under different heat treatment conditions.It concluded that the increase in the number of quenching cycles reduced the heat transfer capacity of the granite,especially more than 10 quenching cycles,which also reflects that the thermal fatigue damage leads to a longer time for the temperature recovery of the hot dry rock mass.In addition,the three-dimensional nonlinear fitting relationship among thermal conductivity,temperature and cycle number was established for the first time,which can better reveal the change rule of thermal conductivity after quenching thermal fatigue effect of hot dry rock.The research results provide theoretical support for hot dry rock reservoir reconstruction and production efficiency evaluation.
基金supported by the National Natural Science Foundation for Distinguished Young Scholars of China(51125017)the National Natural Science Foundation of China(51374213)the National Basic Research Program of China(2010CB226804,2011CB201201)
文摘Accurate characterization and visualization of the complex inner structure and stress distribution of rocks are of vital significance to solve a variety of underground engineering problems. In this paper, we incorporate several advanced technologies, such as CT scan, three-dimensional(3D) reconstruction, and 3D printing, to produce a physical model representing the natural coal rock that inherently contains complex fractures or joints. We employ 3D frozen stress and photoelastic technologies to characterize and visualize the stress distribution within the fractured rock under uniaxial compression. The 3D printed model presents the fracture structures identical to those of the natural prototype. The mechanical properties of the printed model,including uniaxial compression strength, elastic modulus,and Poisson's ratio, are testified to be similar to those of the prototype coal rock. The frozen stress and photoelastic tests show that the location of stress concentration and the stress gradient around the discontinuous fractures are in good agreement with the numerical predictions of the real coalsample. The proposed method appears to be capable of visually quantifying the influences of discontinuous,irregular fractures on the strength, deformation, and stress concentration of coal rock. The method of incorporating3 D printing and frozen stress technologies shows a promising way to quantify and visualize the complex fracture structures and their influences on 3D stress distribution of underground rocks, which can also be used to verify numerical simulations.
基金Project 2006CB202200 supported by the National Basic Research Program of Chinathe National Major Project of Ministry of Education (304005)the Program for Changjiang Scholars and Innovative Research Team in University of China (NoIRT0656)
文摘This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.
基金supported by the National Natural Science Foundation of China (No. 11102224)the Fundamental Research Funds for the Central Universities of China(No. 2009QL05)
文摘We investigated the combined influence of joint inclination angle and joint continuity factor on deforma- tion behavior of jointed rock mass for gypsum specimens with a set of non-persistent open flaws in uni- axial compression. Complete axial stress-strain curves were classified into four types, i.e., single peak, softening after multi-peak yield platform, hardening after multi-peak yield platform and multi-peak dur- ing softening. Observation of crack evolution on the specimen surface reveals that the deformation behavior is correlated to the closure of pre-existing joint, development of fractures in rock matrix and teeth shearing of the shear plane. To investigate the brittleness of the specimens, the ratio of the residual strength to the maximum peak strength as well as the first and last peak strains were studied. At the same joint inclination angle, the ratios between residual strength and the maximum peak strength and the last peak strains increased while the first peak strain decreased with the increase of joint continuity factor. At the same joint continuity factor, the curves of the three brittleness parameters vs. joint inclina- tion angle can either be concave or convex single-oeak or wave-shaoed.
基金This work was supported by the Natural Science Foundation of China(Grant Nos.52074164 and 42077267)the Major Scientific and Technological Innovation Project of Shandong Province,China(Grant No.2019SDZY04)。
文摘The 121 mining method of longwall mining first proposed in England has been widely used around the world.This method requires excavation of two mining roadways and reservation of one coal pillar to mine one working face.Due to considerable excavation of roadway,the mining roadway is generally destroyed during coal mining.The stress concentration in the coal pillar can cause large deformation of surrounding rocks,rockbursts and other disasters,and subsequently a large volume of coal pillar resources will be wasted.To improve the coal recovery rate and reduce excavation of the mining roadway,the 111 mining method of longwall mining was proposed in the former Soviet Union based on the 121 mining method.The 111 mining method requires excavation of one mining roadway and setting one filling body to replace the coal pillar while maintaining another mining roadway to mine one working face.However,because the stress transfer structure of roadway and working face roof has not changed,the problem of stress concentration in the surrounding rocks of roadway has not been well solved.To solve the above problems,the conventional concept utilizing high-strength support to resist the mining pressure for the 121 and 111 mining methods should be updated.The idea is to utilize mining pressure and expansion characteristics of the collapsed rock mass in the goaf to automatically form roadways,avoiding roadway excavation and waste of coal pillar.Based on the basic principles of mining rock mechanics,the“equilibrium mining”theory and the“short cantilever beam”mechanical model are proposed.Key technologies,such as roof directional presplitting technology,negative Poisson’s ratio(NPR)high-prestress constant-resistance support technology,and gangue blocking support technology,are developed following the“equilibrium mining”theory.Accordingly,the 110 and N00 mining methods of an automatically formed roadway(AFR)by roof cutting and pressure releasing without pillars are proposed.The mining methods have been applied to a large nu
文摘The back propagation (BP)-based artificial neural nets (ANN) can identify complicated relationships among dissolved gas contents in transformer oil and corresponding fault types, using the highly nonlinear mapping nature of the neural nets. An efficient BP-ALM (BP with Adaptive Learning Rate and Momentum coefficient) algorithm is proposed to reduce the training time and avoid being trapped into local minima, where the learning rate and the momentum coefficient are altered at iterations. We developed a system of transformer fault diagnosis based on Dissolved Gases Analysis (DGA) with a BP-ALM algorithm. Training patterns were selected from the results of a Refined Three-Ratio method (RTR). Test results show that the system has a better ability of quick learning and global convergence than other methods and a superior performance in fault diagnosis compared to convectional BP-based neural networks and RTR.
基金supported by the Special Research Project for the National Environmental Protection Public Welfare Industry of China(No.201009032)the Strategic Pilot Science and Technology Project of Chinese Academy of Sciences(Class B)(No.XDB05010200)the Project of National Natural Science Foundation of China(No.41175111)
文摘Ambient benzene homologues were measured at a site in the northeastern urban area of Beijing, China, from August 24 to September 4, 2012 by SUMMA canister sampling followed by laboratory determination using cryogenic cold trap pre-concentration-GC-MS/FID, and their health risks were also assessed. Daily total benzene homologues ranged from 0.99 to 49.71 μg/m3 with an average of 11.98 μg/m3. Benzene homologues showed higher concentrations in the morning and evening than that at noontime. Comparison with previous studies revealed a trend of decrease for ambient benzene homologues probably due to the effective emission control in Beijing in recent years. Vehicular exhaust was the main source while volatilization of paints and solvents also made substantial contributions. Health risk assessment showed that BTEX （benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene） and styrene had no appreciable adverse non-cancer health risks for the exposed population, while benzene has potential cancer risk of 1.34E-05. Available data from cities in China all implied that benzene imposes relatively higher cancer risk on the exposed populations and therefore strict control measures should be taken to further lower ambient benzene levels in China.
基金This work was supported by the National Key Development Plan Project of Basic Research(973 Plan)(Grant No.2002CB211704)the National N atural Science Foundation of China(Grant No.40172058)+1 种基金China Postdoctoral Science Foundation(Grant No.200403508)Kuancheng Wang Post-doctoral Research Award Fund of Chinese Academy of Sciences.
文摘There is a more consanguineous relation be-tween nano-scale deformation of coal structure and meta-morphic-deformed environment. In different metamor-phic-deformed environments, deformation in the coal struc-ture can occur not only at micro-scale, but also at nano-scale, and even leads to the change of molecular structure and nano-scale pore (<100 nm) structure. The latter is the main space absorbing coalbed methane. Through X-ray diffraction (XRD) and liquid–nitrogen absorption methods, the charac-teristics of macromolecular and nano-scale pore structures of coals in different metamorphic-deformed environments and deformational series of coals have been studied. By combin-ing with high-resolution transmission electron microcopy (HRTEM), the macromolecular and nano-scale pore struc-tures are also directly observed. These results demonstrate that the stacking Lc of the macromolecular BSU in tectonic coals increases quickly from the metamorphic-deformed environment of low rank coals to that of high rank coals. For different deformed tectonic coals, in the same metamor-phic-deformed environment, the difference of Lc is obvious. These changes reflect chiefly the difference of different tem-perature and stress effect of nano-scale deformation in tec-tonic coals. The factor of temperature plays a greater role in the increase of macromolecular structure parameters Lc, the influence of stress factor is also important. With the stress strengthening, Lc shows an increasing trend, and La /Lc shows a decreasing trend. Therefore, Lc and La /Lc can be used as the indicator of nano-scale deformation degree of tectonic coals. With increasing temperature and pressure, especially oriented stress, the orientation of molecular structure be-comes stronger, and ordering degree of C-nets and the ar-rangement of BSU are obviously enhanced. For the deforma-tion of nano-scale pore structure, in the same metamor-phic-deformed environment, along with the strengthening of stress, the ratio of mesopores to its total pores volume of tec-toni
基金Projects 20207014 and 50674084 supported by the National Natural Science Foundation of China
文摘In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions. In our investigation,the possible processes of groundwater pollution origi-nating from underground coal gasification (UCG) were analyzed. Typical pollutants were identified and pollution con-trol measures are proposed. Groundwater pollution is caused by the diffusion and penetration of contaminants generated by underground gasification processes towards surrounding strata and the possible leaching of underground residue by natural groundwater flow after gasification. Typical organic pollutants include phenols,benzene,minor components such as PAHs and heterocyclics. Inorganic pollutants involve cations and anions. The natural groundwater flow after gasification through the seam is attributable to the migration of contaminants,which can be predicted by mathematical modeling. The extent and concentration of the groundwater pollution plume depend primarily on groundwater flow ve-locity,the degree of dispersion and the adsorption and reactions of the various contaminants. The adsorption function of coal and surrounding strata make a big contribution to the decrease of the contaminants over time and with the distance from the burn cavity. Possible pollution control measures regarding UCG include identifying a permanently,unsuitable zone,setting a hydraulic barrier and pumping contaminated water out for surface disposal. Mitigation measures during gasification processes and groundwater remediation after gasification are also proposed.
基金supported by the Natural Science Foundation of China(grant No.41702171)the Beijing Municipal Excellent Talents Foundation(grant No.2017000020124G107)+1 种基金2017 Open Project Fund of State Key Laboratory of Coal Resources and Safe Mining(grant No.SKLCRSM17KFA12)the Joint Research Fund for Overseas Chinese Scholars and Scholars in HongKong and Macao(grant No.41728005)
文摘The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly attracted for its successful development of coalbed methane(CBM). To improve the previous resource estimates and evaluate the hydrocarbon play possibilities, this study incorporated new discoveries of hydrocarbon units and their stratigraphic relation with source rocks, hydrocarbon migration and trapping configurations. Continuous hydrocarbon accumulation units were identified within the Upper Paleozoic, including the Taiyuan, Shanxi and Xiashihezi formations with great tight gas potential, and the Taiyuan and Shanxi formations also containing shale gas and CBM. Different strata combinations are identified with coal deposition and favour for continuous gas accumulations, including the tidal flat, deltaic and fluvial systems distributed in most of the study areas. Methane was not only generated from the thick coal seams in the Taiyuan and Shanxi formations, but also from shale and dark mudstones. The coal, shale and tight sandstones are proved of remarkable gas content and hydrocarbon indications, and the gas saturation of tight sandstones decreases upward. The stacked deposit combinations vary isochronally in different areas, while the coal seams were developed stably showing good gas sources. Two key stages control the hydrocarbon enrichment, the continuous subsidence from coal forming to Late Triassic and the anomalous paleo-geothermal event happened in Early Cretaceous, as indicated by the fluid inclusions evidence. Extensive areas show good hydrocarbon development potential presently, and more works should be focused on the evaluation and selection of good reservoir combinations.
基金financially supported by the National Key Research and Development Program of China(2019YFC1904302)Foundation of State Key Laboratory of High-efficiency Utilisation of Coal and Green Chemical Engineering(2021-K81)the Technology of Coal-to-liquids Research Institute of National Energy Group([2020]010)。
文摘The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have brought opportunities for coal chemical industry.However,with the large-scale popularisation of coal gasification technology,the production and resulting storage of coal gasification slag continue to increase,which not only result in serious environmental pollution and a waste of terrestrial resources,but also seriously affect the sustainable development of coal chemical enterprises.Hence,the treatment of coal gasification slag is extremely important.In this paper,the production,composition,morphology,particle size structure and water holding characteristics of coal gasification slag are introduced,and the methods of carbon ash separation of gasification slag,both domestically and abroad,are summarised.In addition,the paper also summarises the research progress on gasification slag in building materials,ecological restoration,residual carbon utilisation and other high-value utilisation,and ultimately puts forward the idea of the comprehensive utilisation of gasification slag.For large-scale consumption to solve the environmental problems of enterprises and achieve high-value utilisation to increase the economic benefits of enterprises,it is urgent to zealously design a reasonable and comprehensive utilisation technologies with simple operational processes,strong adaptability and economic benefits.
基金the National Natural Science Foundation of China （Grant No. 40472083）the Key Science and Technology Project of Ministry of Education of China （Grant No. 105020） the Foundation of National Excellent Doctoral Dissertation of China （Grant No. 200448）.
文摘Mineralogy and geochemistry of No.6 Coal from the Heidaigou Mine of the Jungar Coalfield of North China were studied using instrumental neu- tron activation analysis,inductively coupled-plasma mass spectroscopy,X-ray fluorescence spectrometry,and scanning electron microscope equipped with an energy-dispersive X-ray spectrometer. The results show that gallium concentration is as high as 44.8 μg·g?1 in the whole coal-channel sample,and varies from 30.1 μg·g?1 to 76.0 μg·g?1 (mean 51.9 μg·g?1) in the main minable benches of No.6 Coal. Such high concentration of Ga in the coal is far higher than the industrial grade (30 μg·g?1). The thickness of the main minable benches accounts for 81.9% of the whole coal bed. The laboratory high-temperature ashes (550℃) of the main minable coal benches also contain a high concentration of Ga,varying from 62.2 μg·g?1 to 178 μg·g?1,with an average of 89.2 μg·g?1. The boehmite significantly enriched in No.6 Coal is the main carrier of the high Ga in the coal. Average concentration of Ga in boehmite is 0.09%. The av- erage content of boehmite is 6.1% in the whole coal and 7.5% in the main minable benches. Boehmite is derived from the bauxite in the weathered crust of the underlying Benxi Formation in the north of the basin during the peat accumulation. The colloidal idrargillite had been shortly transported from the weathered crust to the peat mire,and owing to the compaction of the overlying strata during the peat accumulation and early diagenesis,the idrargillite colloid had begun to be dehydrated,leading to boehmite formation. A pre- liminary estimation showed that the ensured and prospected reserves of Ga in No.6 Coal are up to 6.3 ×104t and 8.57×105t,indicating a superlarge galliumore deposit. The particular paleogeography of the Jungar Coalfield and the peculiar carrier of Ga in coal suggest that this Ga ore deposit is unique in the world. Rare earth elements are also enriched in coal and laboratory ashes. The weighted average concentra- tion of the total rare
基金Supported by Shanghai Synchrotron Radiation Facility project
文摘With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.
文摘Firstly, the early warning index system of coal mine safety production was given from four aspects as per- sonnel, environment, equipment and management. Then, improvement measures which are additional momentum method, adaptive learning rate, particle swarm optimization algorithm, variable weight method and asynchronous learning factor, are used to optimize BP neural network models. Further, the models are applied to a comparative study on coal mine safety warning instance. Results show that the identification precision of MPSO-BP network model is higher than GBP and PSO-BP model, and MPSO- BP model can not only effectively reduce the possibility of the network falling into a local minimum point, but also has fast convergence and high precision, which will provide the scientific basis for the forewarnin~ management of coal mine safetv production.
基金Acknowledgments This research was supported by the National Program on Key Basic Research Project of China （973 Program） （2011CB201204）, the Visitor Foundation of the State Key Laboratory of Coal Mine Disaster Dynamics and Control （Chongqing University） （2011DA105287-FW201405）, the National Natural Science Foundation of China （51374204 and 51304204）, and a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘Simultaneous extraction of the coal and gas is an effective method of eliminating coal mine gas disasters while safely exploiting the coal and achieving efficient gas drainage in China, which is widely accepted by the main coal-producing countries around the world. However, the concrete definition of simultaneous extraction is vague and there is little accurate theoretical support for the simultaneous extraction of coal and gas, which makes it difficult to determine an efficient gas drainage method appropriate to the features of coal seams. Based on theoretical analysis, laboratory tests and field observations, a specific definition of simultaneous extraction of coal and gas is proposed after analyzing the characteristics of coal seam occurrences in China, and we developed the mechanism of mining-enhanced permeability and established the corresponding theoretical model. This comprises a process of fracture network formation, in which the original fractures are opened and new fractures are produced by unloading damage. According to the theoretical model, the engineering approaches and their quantitative parameters of ＇unloading by borehole drilling＇ for single coal seams and ＇unloading by protective seam mining＇ for groups of coal seams are proposed, and the construction principles for coal exploitation and gas-drainage systems for different conditions are given. These methods were applied successfully in the Tunlan Coal Mine in Shanxi Province and the Panyi Coal Mine in Anhui Province and could assure safe and efficient simultaneous extraction of coal and gas in these outburst coal mines.
